Provides a Change in Direction in a Conduit Run
Commercial, Industrial, Residential, Indoor, Hvacr
View:
Part #:INTMT104
- 24 HOUR TYPE STEEL MATERIAL 5 INCH WIDTH X 3 INCH DEPTH X 7-3/4 INCH HEIGHT SIZE GRAY FINISH 1 TO 12 PER DAY MAX. NUMBER OF OPERATIONS 1 HOUR MIN. OFF TIME 1 HOUR MIN. ON TIME UL (CANADA AND US), CSA (CANADA AND US) APPROVAL INDOOR, POST LANTERN, SIGN, POOL HEATER, FILTER, HYDRO CHLORINATOR, AIR CONDITIONING, BLOWER, ELECTRIC FENCE, PUMP, HEATING/VENTILATING SYSTEM, MUSIC AND SIGNAL SYSTEM, FAN, POULTRY FOGGER, CONVEYER APPLICATION 208 TO 277 VOLT AC AT 60 HERTZ VOLTAGE RATING ENCLOSURE MOUNTING NEMA 1 ENCLOSURE 40 AMP AT 120 TO 480 VOLT AC (RESISTIVE), 40 AMP AT 120 TO 277 VOLT AC (TUNGSTEN/INDUCTIVE) CURRENT RATING 5 HP AT 240 VOLT AC 1-PHASE (28 FLA) POWER RATING -40 TO 130 DEG F OPERATING TEMPERATURE DPST SWITCH TYPE NO RESERVE POWER INTERMATIC BRAND INCLUDES ON/OFF TRIPPER POWER CONSUMPTION 3 WATT WIRE SIZE 14 TO 8 AWG KNOCKOUT SIZE (1) 1/2 INCH AND (1) 3/4 INCH (SIDE/BACK), (2) 1/2 INCH AND (2) 3/4 INCH (BACK) T100 MODEL
$
136.46
Qty:
Part #:INTMT103
- 24 HOUR TYPE STEEL MATERIAL 5-1/8 INCH WIDTH X 3-7/16 INCH DEPTH X 7-7/8 INCH HEIGHT SIZE GRAY FINISH 1 TO 12 PER DAY MAX. NUMBER OF OPERATIONS 1 HOUR MIN. OFF TIME 1 HOUR MIN. ON TIME UL (CANADA AND US), CSA (CANADA AND US) APPROVAL INDOOR, SIGN, POOL HEATER, BLOWER, ELECTRIC FENCE, PUMP, FAN, CONVEYER, OTHER ELECTRICAL LOAD APPLICATION 125 VOLT AC AT 60 HERTZ VOLTAGE RATING NEMA 1 ENCLOSURE 40 AMP AT 120 TO 480 VOLT AC (RESISTIVE), 40 AMP AT 120 TO 277 VOLT AC (TUNGSTEN/INDUCTIVE), 1000 VOLT AMP AT 120 TO 277 VOLT AC (PILOT DUTY) CURRENT RATING 2 HP AT 120 VOLT AC (24 FLA), 5 HP AT 240 VOLT AC (28 FLA) 1-PHASE POWER RATING -40 TO 130 DEG F OPERATING TEMPERATURE DPST SWITCH TYPE NO RESERVE POWER INTERMATIC BRAND MAXIMUM POWER CONSUMPTION 3 WATT WIRE SIZE 14 TO 8 AWG KNOCKOUT DIMENSION (1) 1/2 INCH AND (1) 3/4 INCH (SIDE/BACK), (2) 1/2 INCH AND (2) 3/4 INCH (BOTTOM) INCLUDES ON/OFF TRIPPER T100 MODEL
$
133.50
Qty:
Part #:G1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH IMC/RIGID CONDUIT USED ON 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.17
Qty:
Part #:EMTEL300-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 1 STANDARD PACKAGE 3 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 13 INCH BEND RADIUS LENGTH 3-1/8 INCH (STRAIGHT) OFFSET SIZE 14-1/2 INCH
$
182.80
Qty:
Part #:G2H012
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.625 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.11
Qty:
Part #:G2H100
- 2-HOLE, SNAP-ON, RIBBED TYPE 18 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.75 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 125 STANDARD PACKAGE 1 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.36
Qty:
Part #:G2H114
- 2-HOLE, SNAP-ON, RIBBED TYPE 18 GAUGE GALVANIZED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.46
Qty:
Part #:G2H112
- 2-HOLE, SNAP-ON, RIBBED TYPE 16 GAUGE GALVANIZED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.55
Qty:
Part #:G2H200
- 2-HOLE, SNAP-ON, RIBBED TYPE 16 GAUGE GALVANIZED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 2 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.77
Qty:
Part #:G2H212
- 2-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE GALVANIZED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.88
Qty:
Part #:G2H300
- 2-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE GALVANIZED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 3 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
1.43
Qty:
Part #:G2H400
- 2-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE GALVANIZED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 20 STANDARD PACKAGE 4 INCH TRADE SIZE 0.437 INCH HOLE/BOLT SIZE
$
1.94
Qty:
Part #:EMTEL012-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1/2 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 4 INCH BEND RADIUS LENGTH 1-1/2 INCH (STRAIGHT) OFFSET SIZE 5-3/8 INCH
$
5.40
Qty:
Part #:EMTEL400-22-1/2
- STEEL MATERIAL GALVANIZED FINISH UL (CANADA AND US) APPROVAL 1 STANDARD PACKAGE 4 INCH TRADE SIZE PLAIN END TYPE 22.5 DEGREE BEND ANGLE 16 INCH BEND RADIUS
$
76.10
Qty:
Part #:EMTEL400-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 1 STANDARD PACKAGE 4 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 16 INCH BEND RADIUS LENGTH 3-3/8 INCH (STRAIGHT) OFFSET SIZE 17-1/8 INCH
$
93.65
Qty:
Part #:EMTEL100-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS LENGTH 1-7/8 INCH (STRAIGHT) OFFSET SIZE 7-1/4 INCH
$
6.57
Qty:
Part #:EMTEL100-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE PLAIN END TYPE 90 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS LENGTH 1-7/8 INCH (STRAIGHT) OFFSET SIZE 7-5/8 INCH
$
8.34
Qty:
Part #:EMTEL114-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 20 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 7-1/4 INCH BEND RADIUS LENGTH 2 INCH (STRAIGHT) OFFSET SIZE 8-1/2 INCH
$
12.75
Qty:
Part #:EMTEL114-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 20 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE PLAIN END TYPE 90 DEGREE BEND ANGLE 7-1/4 INCH BEND RADIUS LENGTH 2 INCH (STRAIGHT) OFFSET SIZE 9-1/4 INCH
$
17.59
Qty:
Part #:EMTEL112-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 15 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS LENGTH 2 INCH (STRAIGHT) OFFSET SIZE 9-1/4 INCH
$
14.82
Qty:
Part #:EMTEL112-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 15 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE PLAIN END TYPE 90 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS LENGTH 2 INCH (STRAIGHT) OFFSET SIZE 10-1/4 INCH
$
13.19
Qty:
Part #:EMTEL200-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 10 STANDARD PACKAGE 2 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS LENGTH 2 INCH (STRAIGHT) OFFSET SIZE 10-1/8 INCH
$
18.83
Qty:
Part #:EMTEL200-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 10 STANDARD PACKAGE 2 INCH TRADE SIZE PLAIN END TYPE 90 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS LENGTH 2 INCH (STRAIGHT) OFFSET SIZE 11-1/2 INCH
$
18.83
Qty:
Part #:EMTEL212-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 1 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 10-1/2 INCH BEND RADIUS LENGTH 3 INCH (STRAIGHT) OFFSET SIZE 12-1/2 INCH
$
53.73
Qty:
Displaying: 1 - 24 of 34 Matching Items