N1 Screw Cover Without/ko's
Conduit Hangers Stainless W/bolt
View:
Active Filters :
Part #:KLE32303
-
14-in-1 Multi-Bit Adjustable Length Screwdriver
32303
Multi-bit screwdriver includes 13 different screwdriver bits and a 1/4-Inch nut driver
Industrial-strength bits that are conveniently housed in the handle
Adjust the length of the blade for easier access
Impact rated blade can be removed for use as an impact driver attachment
Stainless steel bit holder contains powerful rare earth magnets for securing bits and fasteners
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Qty:
Part #:KLE32305
-
15-in-1 Multi-Bit Ratcheting Screwdriver
32305
Multi-Bit screwdriver features a durable ratcheting mechanism for faster and easier all-day driving
On-board storage of 14 different double-sided screwdriver bits and a 1/4-Inch nut driver
Industrial-strength bits that are conveniently housed in the handle
Collar sets ratchet direction at forward, fixed and reverse
Cushion-Grip handle for great torque and maximum comfort
Spin cap for optimum and precise control
Includes Phillips (#0, #1, #2, #3), Slotted (3/16-Inch, 1/4-Inch), Square (#1, #2), Torx® (T10, T15, T20, T25), and Combo (#1, #2) bits
TORX® is a registered trademark of Acument Intellectual Properties, LLC
Qty:
Part #:KLE32307
-
27-in-1 Multi-Bit Tamperproof Screwdriver
32307
Multi-Bit screwdriver features convenient on-board storage of 26 different tamperproof bits and a 1/4-Inch nut driver
Barrel contains powerful rare earth magnets for securing bits and fasteners
Industrial-strength, double-sided bits that are conveniently housed in the handle eliminating the need for a bulky bit block
Stainless steel barrel provides great impact and wear resistance
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Includes the following tamper-proof bits Torx®, TORQ-SET®, Hex, and Spanner
TORQ-SET® is a registered trademark of Phillips Screw Co TORX® is a registered trademark of Acument Intellectual Properties, LLC
Qty:
Part #:KLE32308
-
8-in-1 Multi-Bit Adjustable Length Stubby Screwdriver
32308
Multi-bit stubby screwdriver includes 7 different screwdriver bits and a 1/4-Inch nut driver
Compact driver reaches easily into tight spots
Industrial-strength bits that are conveniently housed in the handle
Adjust the length of the blade for easier access
Impact rated blade can be removed for use as an impact driver attachment
Stainless steel bit holder contains powerful rare earth magnets for securing bits and fasteners
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Qty:
Part #:KLE32476
- PHILLIPS, SLOTTED TYPE CHROME PLATED FINISH 7-3/4 INCH OVERALL LENGTH 4 INCH SHANK LENGTH HEAT TREATED PROCESS CUSHION GRIP HANDLE, PRECISION, 5-IN-1 STYLE BLACK/YELLOW HANDLE COLOR 3/16 INCH, 9/32 INCH (SLOTTED), #1, #2 (PHILLIPS), 5/16 INCH (NUTDRIVER) TIP SIZE TEMPERED STEEL SHANK MATERIAL TIP-IDENT[R] BRAND APPLICABLE STANDARD ASME/ANSI
Qty:
Qty:
Part #:KLE32500MAG
-
11-in-1 Magnetic Screwdriver / Nut Driver
32500MAG
Integrated screwdriver / nut driver magnetic barrel holds 8 popular tips and converts to 3 nut driver sizes
Strong, rare earth magnets securely hold bits and fasteners
Industrial strength heat treated bits
Interchangeable shaft for quick and easy switch out
Cushion-Grip handle for greater torque and comfort
Includes tips 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX®, and #1 and #2 square recess
Blast-finished bit tips provide a firm hold and reduce cam-out
The following replacement bits are available see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX)
Qty:
Qty:
Part #:HAM18126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 6 INCH 6 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 152.4 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
50.54
Qty:
Part #:HAMCS10106
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
29.97
Qty:
Part #:MILBU5168-XTL-200-KK
- RINGLESS TYPE 14-1/8 INCH W X 4-1/2 INCH D X 32 INCH H SIZE 6 AWG TO 350 KCMIL (LINE) WIRE SIZE GALVANIZED STEEL ENCLOSURE MATERIAL UL APPROVAL 240 VAC VOLTAGE RATING SURFACE MOUNTING NEMA 3R ENCLOSURE 200 AMPERE CURRENT RATING 1-PHASE 3-WIRE CIRCUIT CONFIGURATION OVERHEAD/UNDERGROUND SERVICE TYPE 8 CIRCUIT(S) CLOSING PLATE HUB TYPE (1) (1/4 INCH - 1/2 INCH), (4) (1/2 INCH - 3/4 INCH), (2) (1/2 INCH - 3/4 INCH - 1 INCH), (3) (3/4 INCH - 1 INCH - 1-1/4 INCH - 1-1/2 INCH - 2 INCH), (1) (1 INCH - 1-1/4 INCH - 1-1/2 INCH - 2 INCH - 2-1/2 INCH), (1) (1-1/4 INCH - 1-1/2 INCH - 2 INCH - 2-1/2 INCH - 3 INCH) CONCENTRIC KNOCKOUT KNOCKOUT(S) 4 JAW(S) HORN BYPASS SWITCH 22 KILOAMPERE INTERRUPTING RATING CIRCUIT BREAKER MAIN DISCONNECT TYPE U5168 MODEL
$
359.09
Qty:
Part #:HAMCS18124
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 4 INCH 4 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 101.6 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
47.58
Qty:
Part #:HAMCS12126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 12 INCH 12 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
38.49
Qty:
Part #:HAMCS18186
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 18 INCH 18 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
67.54
Qty:
Part #:6B
- CONDUIT HANGER WITH BOLT TYPE 14 GAUGE STEEL MATERIAL BRIGHT ZINC ELECTROPLATED FINISH UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 6 INCH TRADE SIZE 3/8 INCH MOUNTING HOLE SIZE 2-1/2 INCH RIGID/EMT CONDUIT TYPE SCREW SIZE 1/4 INCH X 1-1/2 INCH
$
1.89
Qty:
Part #:2-1/2B
- CONDUIT HANGER WITH BOLT TYPE 18 GAUGE STEEL MATERIAL BRIGHT ZINC ELECTROPLATED FINISH UL (CANADA AND US) APPROVAL 100 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE 1/4 INCH MOUNTING HOLE SIZE 1-1/4 INCH EMT CONDUIT TYPE SCREW SIZE 1/4 INCH X 1 INCH
$
0.88
Qty:
Part #:3B
- CONDUIT HANGER WITH BOLT TYPE 18 GAUGE STEEL MATERIAL BRIGHT ZINC ELECTROPLATED FINISH UL (CANADA AND US) APPROVAL 100 STANDARD PACKAGE 3 INCH TRADE SIZE 1/4 INCH MOUNTING HOLE SIZE 1-1/4 INCH RIGID, 1-1/2 INCH EMT CONDUIT TYPE SCREW SIZE 1/4 INCH X 1 INCH
$
0.88
Qty:
Part #:4B
- CONDUIT HANGER WITH BOLT TYPE 16 GAUGE STEEL MATERIAL BRIGHT ZINC ELECTROPLATED FINISH UL (CANADA AND US) APPROVAL 100 STANDARD PACKAGE 4 INCH TRADE SIZE 5/16 INCH MOUNTING HOLE SIZE 1-1/2 INCH RIGID CONDUIT TYPE SCREW SIZE 1/4 INCH X 1 INCH
$
1.27
Qty:
Part #:9B
- CONDUIT HANGER WITH BOLT TYPE 14 GAUGE STEEL MATERIAL BRIGHT ZINC ELECTROPLATED FINISH UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 9 INCH TRADE SIZE 3/8 INCH MOUNTING HOLE SIZE 4 INCH RIGID/EMT CONDUIT TYPE SCREW SIZE 1/4 INCH X 1-1/2 INCH
$
4.90
Qty:
Part #:5B
- CONDUIT HANGER WITH BOLT TYPE 16 GAUGE STEEL MATERIAL BRIGHT ZINC ELECTROPLATED FINISH UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 5 INCH TRADE SIZE 5/16 INCH MOUNTING HOLE SIZE 2 INCH RIGID/EMT CONDUIT TYPE SCREW SIZE 1/4 INCH X 1 INCH
$
1.73
Qty:
Part #:7B
- CONDUIT HANGER WITH BOLT TYPE 14 GAUGE STEEL MATERIAL BRIGHT ZINC ELECTROPLATED FINISH UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 7 INCH TRADE SIZE 3/8 INCH MOUNTING HOLE SIZE 3 INCH RIGID/EMT CONDUIT TYPE SCREW SIZE 1/4 INCH X 1-1/2 INCH
$
2.19
Qty:
Part #:HAMCS24248
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 24 INCH 24 INCH 8 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
169.20
Qty:
Part #:HAMCS664
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 6 INCH 6 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
13.24
Qty:
Part #:HAMCS884
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
18.72
Qty:
Displaying: 1 - 24 of 33 Matching Items