Firex
Condulet


Displaying: 1 - 24 of 27 Matching Items
27 Items
View:
Active Filters :
Part #:KIDHD135F
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke. The Kidde HD135F 120VAC wire in heat alarm gives you and your family an early warning to dangerous temperatures of 135F or more This unit also includes a tamper resist pin that helps to deter thief and tampering. This unit can be used as a single station unit or it can be interconnected to up to 24 Kidde devices in a multiple station arrangement The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke. The alarm will sound if temperatures rise above 135F. The Kidde HD135F is interconnectable. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices (Smoke, heat, CO, etc) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. This unit includes a 5-year limited warranty and is UL Listed. Interconnectable &ndash Interconnects with up to 24 Kidde devices of which 18 can be initiating. Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function. 9V Battery Back Up &ndash Provides continuous protection even during power outages. Red LED &ndash Flashes every 30-40 seconds to indicate proper operation. Low Battery Indicator &ndash Alerts user in the event of alow or missing battery. Quick Connect Power Harness &ndash Makes installation fast and easy. Technical Specifications Model HD135F UPC Number 0-25417-84135-0 Power Source 120VAC, 60HZ, 9V battery backup Sensor Heat Audio Alarm 85dB at 10ft Temperature Range -20F to +100F (-29C and +38C) Humidity Range 5%-95% relative humidity (RH) Size 5&rdquo in diameter x 2&rdquo depth Weight .75lbs Interconnects Up to 24 Kidde devices of which 18 can be initiating devices. LED Green, AC power present, alarm mode flashing Red indicates originating unit Warranty 5 year limited warranty
$ 34.89
Qty:
add to cart
Part #:MILW49-22-0175
Get added convenience and reach with the Milwaukee 8-Piece 6" Universal QUIK-LOK Flat Boring Bit Set. Bore small, clean holes at any angle in a variety of materials. The double wing spurs provide easy hole formation while reducing vibration and preventing "break out." The patented cutting edge produces easier and faster wood boring and fast chip removal, allowing heat from the bit to dissipate. The Universal QUIK-LOK allows quick and easy accessory changes, as well as added reach in hard-to-work areas. The kit includes 3/8", 1/2", 5/8", 3/4", 7/8", 1" and 1-1/8" bits plus a 6" QUIK-LOK Extension in a carrying case. Bullets Sharp cutting edge Patented edge promotes easy wood boring, faster chip removal and reduced vibration Clean holes Double wing spurs allow for fast, clean hole cutting Versatile 1/4" Quick-change hex shank can be used in all universal QUIK-LOK extensions Convenient 8-Piece set provides quick and easy accessory changes 80035
$ 25.73
Qty:
add to cart
Part #:KIDI4618A
The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. Easy Installation &bull Front battery pull tab allows battery activation without removing alarm from mounting bracket. &bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections. &bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip. Fewer Callbacks &bull Large centrally located Test/Hush&reg alarm control button. &bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms. User-Friendly Features &bull Easy access front loading battery door. &bull Battery backup provides protection in case of power failure. &bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions. Technical Specifications Model i4618 UPC 0-47871-07581-2 Power Source 120VAC (80mA Max) Sensor Ionization Audio Alarm 85dB at 10ft Temperature Range 40&degF (4.4&degC) to 100&degF (37.8&degC) Humidity Range Up to 85% relative humidity (RH) Size 5.6 in diameter x 1.8 in depth Weight .5lbs Interconnects Up to 24 Kidde devices LED Green, receiving ac power,Red, 4 modes of operation Warranty 5 year limited
$ 12.77
Qty:
add to cart
Part #:I12040
SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$ 23.04
Qty:
add to cart
Part #:CRS670
BLANK, SCREW, WEDGENUT TYPE SHEET STEEL (COVER), STAINLESS STEEL (SCREW) MATERIAL 7 INCH UL 514B, CSA C22.2 APPROVAL 2 INCH TRADE SIZE FORM 7 FORM TYPE COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION
$ 23.41
Qty:
add to cart
Part #:CRSGASK571
NEOPRENE MATERIAL 3.625 INCH CLIP-ON COVER TYPE 1/2 INCH TRADE SIZE FORM 7 FORM TYPE CONDULET[R] BRAND APPLICATION NON-HAZARDOUS LOCATION USED ON CONDUIT BODY
$ 6.76
Qty:
add to cart
Part #:CRSGASK576
NEOPRENE MATERIAL 7 INCH CLIP-ON COVER TYPE 2 INCH TRADE SIZE FORM 7 FORM TYPE CONDULET[R] BRAND APPLICATION NON-HAZARDOUS LOCATION USED ON CONDUIT BODY
$ 13.57
Qty:
add to cart
Part #:CRSGASK578
NEOPRENE MATERIAL 9.125 INCH CLIP-ON COVER TYPE 2-1/2 INCH, 3 INCH TRADE SIZE FORM 7 FORM TYPE CONDULET[R] BRAND APPLICATION NON-HAZARDOUS LOCATION USED ON CONDUIT BODY
$ 22.53
Qty:
add to cart
Part #:CRSLL67
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 8.125 INCH LENGTH X 3.125 INCH WIDTH X 4.125 INCH HEIGHT SIZE RIGID CONDUIT USED ON 2 INCH HUB SIZE THREADED INSTALLATION LL CONFIGURATION 2 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE 90 DEGREE HUB LOCATION FORM 7 FORM TYPE LEFT SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D LL MODEL
$ 132.71
Qty:
add to cart
Part #:CRSLR37
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 6 INCH LENGTH X 1.875 INCH WIDTH X 2.75 INCH HEIGHT SIZE RIGID CONDUIT USED ON 1 INCH HUB SIZE THREADED INSTALLATION LR CONFIGURATION 2 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE 90 DEGREE HUB LOCATION FORM 7 FORM TYPE RIGHT SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D LR MODEL
$ 23.63
Qty:
add to cart
Part #:CRSLR67
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 8.125 INCH LENGTH X 3.125 INCH WIDTH X 4.125 INCH HEIGHT SIZE RIGID CONDUIT USED ON 2 INCH HUB SIZE THREADED INSTALLATION LR CONFIGURATION 2 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE 90 DEGREE HUB LOCATION FORM 7 FORM TYPE RIGHT SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D LR MODEL
$ 132.71
Qty:
add to cart
Part #:CRST27
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 6.25 INCH LENGTH X 2 INCH WIDTH X 2.625 INCH HEIGHT SIZE RIGID CONDUIT USED ON 3/4 INCH HUB SIZE THREADED INSTALLATION T CONFIGURATION 3 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE TEE HUB LOCATION FORM 7 FORM TYPE SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D T MODEL
$ 32.63
Qty:
add to cart
Part #:HALCJCD100
HAL107003
$ 2.04
Qty:
add to cart
Part #:HALCJC20
HAL107010
$ 0.86
Qty:
add to cart
Part #:HALCQ150CL/MC
$ 4.95
Qty:
add to cart
Part #:HALCQ250CL/DC
HAL107033
$ 3.36
Qty:
add to cart
Part #:HALCJDR75/L
HAL107054
$ 0.50
Qty:
add to cart
Part #:HALCMR16FL35/L/GU10
HAL107154
$ 3.80
Qty:
add to cart
Part #:HALCQ100T3C/S
HAL107184
$ 3.38
Qty:
add to cart
Part #:HALCQ150T3C
$ 3.95
Qty:
add to cart
Part #:HALCQ500T3C
HAL107196
$ 3.09
Qty:
add to cart
Part #:HALCQ1000T3C
CLEAR COLOR 10 INCH OVERALL LENGTH 240 V VOLTAGE RATING 500 PER CARTON STANDARD PACKAGE 1000 W WATTAGE R7S BASE TYPE 2000 LIFE IN HOUR T3 SHAPE DESIGNATION 22000 LUMEN INTENSITY C8 FILAMENT TYPE ROHS COMPLIANT OVERALL DIAMETER 0.39 INCH DIMMABLE YES OPERATING POSITION UNIVERSAL COLOR TEMPERATURE 3050 K COLOR RENDERING INDEX 99 FREQUENCY RATING 60 HZ USED ON TRACK LIGHTING, LANDSCAPE LIGHTING APPLICATION RESIDENTIAL, COMMERCIAL
$ 7.31
Qty:
add to cart
Part #:HALCQ250T3C/S
HAL107208
$ 3.95
Qty:
add to cart
Part #:HALCQ75T3C/S
HAL107210
$ 3.95
Qty:
add to cart
 
Displaying: 1 - 24 of 27 Matching Items