Connects Two Pieces of Threadless Rigid/imc Conduit
Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
View:
Active Filters :
- Application: Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Connects Two Pieces of Threadless Rigid/imc Conduit Flexible/nm Cable Non Metallic Cable
![3/8 ROMEX CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN038.jpg)
Part #:RXCN038
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL (2) SCREW INSTALLATION UL 514B APPROVAL 1000 STANDARD PACKAGE 3/8 INCH TRADE SIZE 1/2 INCH KNOCKOUT SIZE (2) 14 AWG, (2) 12 AWG CORD SIZE NON-INSULATED THROAT TYPE NON-METALLIC CABLE SINGLE CABLE OPENING
$
0.33
Qty:
![3/4 NM CABLE CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN034.jpg)
Part #:RXCN034
- ZINC ELECTROPLATED STEEL MATERIAL (2) SCREW TILT-IN INSTALLATION ROMEX/NON-METALLIC CABLE CABLE TYPE (2) OR (3) 8 AWG, 6 AWG, 4 AWG CABLE SIZE 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 INCH, 1 INCH KNOCKOUT SIZE NON-INSULATED THROAT TYPE
$
1.28
Qty:
![PVC NM CBL CONN 1 WIRE [Romex Connector, NM-B Connector]](https://southerntierelectricsupply.com/productimage/detail/ARLNM840.jpg)
Part #:ARLNM840
- STRAIGHT TYPE PVC MATERIAL 0.965 INCH OUTER DIAMETER X 1.406 INCH LENGTH SIZE UL, CSA APPROVAL 3/8 INCH THREAD SIZE KNOCKOUT SIZE 1/2
$
0.23
Qty:
Part #:ARLNM841
- STRAIGHT, PUSH-IN TYPE PLASTIC MATERIAL 1.125 INCH DIA X 1.34 INCH L SIZE UL, CSA APPROVAL 1/2 INCH THREAD SIZE PACKAGING QUANTITY 1000 PER PACK
$
0.40
Qty:
$
0.25
Qty:
Part #:TOP457
- GRAY PLASTIC MATERIAL SNAP-IN INSTALLATION NON-METALLIC CABLE CABLE TYPE (2) 14 AWG OR (2) 12 AWG CABLE SIZE UL APPROVAL 1000 PER CASE STANDARD PACKAGE 1/2 INCH KNOCKOUT SIZE ROHS COMPLIANT SIZE 1 INCH DIA
$
0.29
Qty:
$
1.45
Qty:
Part #:ENY-2M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 3/4 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-9/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
29.33
Qty:
Part #:ENY-1M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE THREADED, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1/2 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-3/16 INCH TURNING RADIUS OVERALL DIMENSION 3-15/16 INCH H ENY MODEL
$
24.98
Qty:
Part #:KLRKENY-3M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-13/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
37.73
Qty:
Part #:KLRKENY-4M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP C D, CLASS I ZONE 1 GROUP IIA IIB, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1-1/4 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-25/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
46.14
Qty:
Part #:KILLENY-5M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE THREADED, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1-1/2 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-29/32 INCH TURNING RADIUS OVERALL DIMENSION 5-11/16 INCH H ENY MODEL
$
69.40
Qty:
Part #:KILLENY-6M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE THREADED, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 2 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 2-5/16 INCH TURNING RADIUS OVERALL DIMENSION 6-3/8 INCH H ENY MODEL
$
89.98
Qty:
Part #:MTCMCP034
- COMPRESSION, THREADLESS TYPE ZINC PLATED MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 100 STANDARD PACKAGE 3/4 INCH TRADE SIZE CONCRETE-TIGHT ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB-1
$
5.36
Qty:
Part #:MTCMCP100
- COMPRESSION, THREADLESS TYPE ZINC PLATED MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE-TIGHT ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB-1
$
9.23
Qty:
Part #:MTCMCP114
- COMPRESSION, THREADLESS TYPE ZINC PLATED MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 25 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CONCRETE-TIGHT ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB-1
$
13.73
Qty:
Part #:MTCMCP200
- COMPRESSION, THREADLESS TYPE ZINC PLATED MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 5 STANDARD PACKAGE 2 INCH TRADE SIZE CONCRETE-TIGHT ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB-1
$
43.26
Qty:
Part #:CUTTP100
- NON-GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 1-1/2 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL EAR MOUNTING 50 STANDARD PACKAGE 7.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE END KNOCKOUT SIZE 5 KNOCKOUT(S) (1) BOTTOM, (4) CABLE END KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.85
Qty:
Part #:CUTTP138
- GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 2-1/4 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL EAR MOUNTING 50 STANDARD PACKAGE 10.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE END KNOCKOUT SIZE 5 KNOCKOUT(S) (1) BOTTOM, (4) CABLE END KNOCKOUT LOCATION NO CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
7.95
Qty:
Part #:CUTTP162
- GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 2-1/2 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL EAR MOUNTING 50 STANDARD PACKAGE 12.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (2) 1/2 INCH SIDE, (4) CABLE END, (2) 1/2 INCH END KNOCKOUT SIZE 9 KNOCKOUT(S) (1) BOTTOM, (2) SIDE, (2) END, (4) CABLE END KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.28
Qty:
Part #:CUTTP170
- GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 2-1/2 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 5/8 INCH SETBACK S BRACKET MOUNTING 50 STANDARD PACKAGE 12.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (2) 1/2 INCH SIDE, (4) CABLE END, (2) 1/2 INCH END KNOCKOUT SIZE 9 KNOCKOUT(S) (1) BOTTOM, (2) SIDE, (2) END, (4) CABLE END KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.19
Qty:
Part #:CUTTP171
- GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 2-1/2 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 1/2 INCH SETBACK VP BRACKET MOUNTING 50 STANDARD PACKAGE 12.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (2) 1/2 INCH SIDE, (4) CABLE END, (2) 1/2 INCH END KNOCKOUT SIZE 9 KNOCKOUT(S) (1) BOTTOM, (2) SIDE, (2) END, (4) CABLE END KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
7.92
Qty:
Part #:CUTTP238
- GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 3-1/2 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL EAR MOUNTING 25 STANDARD PACKAGE 18 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) 1/2 INCH SIDE, (4) CABLE END, (2) 1/2 INCH END KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (4) SIDE, (2) END, (4) CABLE END KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.72
Qty:
Displaying: 1 - 24 of 27 Matching Items