Kidde
Cs Series


Displaying: 1 - 12 of 12 Matching Items
12 Items
View:
Active Filters :
Part #:KIDI9040E
The Fire Sentry i9040 smoke alarm is a battery operated smoke alarm that utilizes ionization sensing technology. The four (4) inch unit is smaller in diameter giving it discreet design with the same quality you would expect in a Kidde manufactured product. The i9040 is powered by a 9V battery, providing continuous protection, even during power outages. This easy to install unit includes a test button to verify the detection electronics are working as intended. Benefits The Fire Sentry i9040 battery operated, single station smoke alarm provides an early warning signal to you and your family in the event of a fire hazard. The i9040 operates on a 9V battery power source that provided continuous protection even during a power outage, Installation is easy, no wiring required. This unit is UL Listed and includes a 3 year limited warranty. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. Battery Operated (9V Battery Included) &ndash Easy installation and provides continuous protection even during power outages. Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function. Low Battery Indicator &ndash Low battery warning chirp alerts user to change battery. Discreet Design &ndash Four (4) inch diameter. Technical Specifications Model Number i9040 Power Source 9V Battery (included) Audio Alarm 85dB at 10ft Temperature Range 40F to 100F (4&degC to 38&degC) Humidity Range up to 85% relative humidity (RH) Sensor Ionization Size 4&rdquo in diameter x 1.45&rdquo depth Weight .5lbs Interconnects No Warranty 3 year limited
$ 8.13
Qty:
add to cart
Part #:MILW48-11-2401
Smaller and lighter than NiCd compact batteries, yet delivers long runtime and fade-free power. The M12 REDLITHIUM Battery is designed with superior pack construction, electronics and performance to optimize work per charge and work over pack life on the jobsite. This battery is 65PERC lighter and 50PERC smaller than compact NiCd batteries and offers 1.5 amp-hours of runtime. With built-in Milwaukee durability, it runs cooler and performs in climates below 0F/-18C. Managed by Milwaukees exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. The temperature management system and individual cell monitoring help maximize battery life. Use this durable battery to power your Milwaukee M12 cordless power tools. Bullets REDLINK Intelligence Provides optimized performance and overload protection using total system communication between tool, battery and charger Best-in-class construction Offers long-lasting performance and durability All-weather performance Delivers fade-free power in extreme jobsite conditions Versatility Powers Milwaukee M12 cordless power tools 93049
$ 53.65
Qty:
add to cart
Part #:KIDKN-COSM-BA
Description The Kidde KN-COSM-BA Combination Carbon Monoxide &amp Smoke Alarm provides two important safety devices in a single unit. This alarm includes a voice warning system that announces &ldquoFire, Carbon Monoxide, Low Battery and Smart HushTM Activation.&rdquo The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This technologically advanced combination alarm is battery operated protecting you and your family even during a power outage when many incidences occur. The KN-COSM-BA is an easy to install alarm that is suitable for all living areas and has a 10-year life and a 5-year limited warranty. This alarm uses ionization sensing technology. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. Alarm Warnings Fire The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message &ldquoFIRE!&rdquo. The alarm pattern will repeat until smoke is eliminated. Carbon Monoxide Four short alarm beeps followed by a verbal warning &ldquoWARNING! CARBON MONOXIDE!&rdquo This continues until the unit is reset or the CO is eliminated. Low Battery If any form of battery failure is detected the red LED light will flash and the unit will &ldquochirp&rdquo once every 60 seconds for at least 7 days. The &ldquoLOW BATTERY&rdquo voice occurs once every 15 minutes. The green LED will also be flashing twice per second. Voice Hush Indication &ldquoHUSH MODE ACTIVATED&rdquo and &ldquoHUSH MODE CANCELLED&rdquo voice announcement. Peak Level Memory If the alarm had detected a CO level of 100ppm or higher, the unit will announce &ldquoCARBON MONOXIDE PREVIOUSLY DETECTED&rdquo to warn of the CO incident, when the Test/ Reset button is pressed. Voice Alarm &ndashAnnounces the hazard type detected thereby helping to speed up the correct reaction to the hazard detected. Alarm announces &ldquoFire!&rdquo when a smoke or fire hazard is detected and announces &ldquoWarning Carbon Monoxide&rdquo when a CO hazard is detected. Combined Carbon Monoxide and Smoke Alarm &ndash A single unit can be installed where previously, two were needed. Reduces installation time and helps to keep home d&eacutecor attractive. Test/Reset Button &ndash Tests alarm circuitry and triggers the voice announcement. LEDs &ndash Flashing green for normal operation and flashing red for alarm condition. Low Battery Warning &ndash The unit warns of a low battery condition by announcing &ldquolow battery&rdquo and by initiating an alarm chirp and activating a flashing red LED. Battery Powered &ndash Provides protection even during power outages when many fire and carbon monoxide incidents occur. Battery Safeguard &ndash The battery door will not close unless the batteries are properly installed. Hush&reg Feature &ndash Temporarily silences nuisance alarms. Ionization Smoke Alarm Sensor Technical Specifications Model KN-COSM-BA Power Source 2 AA Battery Sensor Smoke Ionization, CO Electrochemical Audio Alarm 85dB at 10ft Temperature Range 40F (4.4C) to 100F (37.8C) Humidity Range 10%-95% relative humidity non-condensing Size 5.6&rdquo in diameter x 1.8&rdquo depth Weight 13oz Interconnects No
$ 50.49
Qty:
add to cart
Part #:HAMCS664
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 6 INCH 6 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$ 13.24
Qty:
add to cart
Part #:HAMCS884
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$ 18.72
Qty:
add to cart
Part #:HAMCS886
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$ 23.27
Qty:
add to cart
Part #:HAMCS10106
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$ 29.97
Qty:
add to cart
Part #:HAMCS12126
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 12 INCH 12 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$ 38.49
Qty:
add to cart
Part #:HAMCS18186
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 18 INCH 18 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$ 67.54
Qty:
add to cart
Part #:HAM18126
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 6 INCH 6 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 152.4 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$ 50.54
Qty:
add to cart
Part #:HAMCS18124
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 4 INCH 4 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 101.6 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$ 47.58
Qty:
add to cart
Part #:HAMCS24248
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 24 INCH 24 INCH 8 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$ 169.20
Qty:
add to cart
 
Displaying: 1 - 12 of 12 Matching Items