M18 Fuel
Cs Series
$
2.54
Qty:
Part #:MILW2767-20
- The 2767 M18 FUEL high torque 1/2 in. impact wrench with friction ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000ft-lbs of fastening torque and 1400ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industrys most compact cordless high torque impact wrench at 8.39 in. in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials. 02233
$
262.34
Qty:
Part #:MILW2767-22
- The 2767 M18 FUEL high torque 1/2 in. impact wrench with friction ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000ft-lbs of fastening torque and 1400ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industrys most compact cordless high torque impact wrench at 8.39 in. in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials. 02240
$
479.45
Qty:
Part #:MILW2719-21
- The Milwaukee 2719 M18 FUEL HACKZALL is the fastest cutting and most powerful one-handed reciprocating saw. Utilizing a POWERSTATE brushless motor and a best in class 7/8 in. stroke length, the M18 FUEL HACKZALL cuts up to 50 percent faster than competitors. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides up to 4x lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M18 REDLITHIUM XC5.0 battery pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris. 02974
$
299.80
Qty:
Part #:MILW2853-20
- The M18 FUEL 1/4 in. impact driver is the fastest, most compact, and most powerful tool in its class. The POWERSTATE brushless motor delivers up to 2,000in-lbs of torque and up to 30 percent faster driving speed, increasing users productivity for the most demanding fasteners on the job. With the most compact tool at only 4.59 in. in length, users will have more access in tight spaces. The REDLINK Plus intelligence ensures maximum performance and protects from overloads, heating or over-discharge. The REDLITHIUM battery pack (not included) delivers more work per charger and more work over the life of the pack than competitors. The 4-mode DRIVE CONTROL provides greater control over output speed and power for greater versatility. Self-tapping screw mode provides faster installation time by reducing stripping of fasteners. 14427
$
144.00
Qty:
Part #:MILW2737-20
- The M18 FUEL D-handle jig saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18 FUEL D-handle jig saw leverages the POWERSTATE brushless motor and REDLINK Plus intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18 REDLITHIUM XC5.0 battery the M18 FUEL D-handle jig saw provides up to 105 linear feet of cutting in 3/4 in. laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with pin-detents at 0. 15. 30. and 45 as well as an LED light and on/off blower to keep the cut line visible while cutting. 15189
$
187.06
Qty:
Part #:MILW2737B-20
- The M18 FUEL barrel grip jig saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18 FUEL D-handle jig saw leverages the POWERSTATE brushless motor and REDLINK Plus intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18 REDLITHIUM XC5.0 battery the M18 FUEL D-handle jig saw provides up to 105 linear feet of cutting in 3/4 in. laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with pin-detents at 0. 15. 30. and 45 as well as an LED light and on/off blower to keep the cut line visible while cutting. 15363
$
187.06
Qty:
Part #:MILW2631-20
- The M18 brushless 7-1/4 in. circular saw delivers up to 40 percent more power than circular saws with brushed motors while providing up to 30 percent more run-time as well. The Milwaukee built motor, REDLINK electronics and REDLITHIUM XC5.0 battery provide more efficient power delivery, more power and fewer trips to the charger. With 5,000 RPM that 2631 provides smooth cutting and at only 9.0 lbs. it is lighter than most corded saws. The saw also features an integrated rafter hook, magnesium guards, an aluminum shoe and LED light. 30250
$
192.24
Qty:
Part #:MILW2767-22GG
- The M18 FUEL high torque impact wrench with friction ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft./lbs. of fastening torque and 1400 ft./lbs. of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industry's most compact cordless high torque impact wrench at 8.39 in. L, this tool allows for more access in tight spaces. 4-Mode drive control with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber over mold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials. 32292
$
639.00
Qty:
$
64.43
Qty:
Part #:SATS9448
- 5-3/16 INCH UL, UL (CANADA AND US), ETL APPROVAL DOWN/TRACK LIGHTING, WET LOCATION APPLICATION 120 VOLT VOLTAGE RATING 4-3/4 INCH DIAMETER 15 WATT WATTAGE LED LAMP E26 MEDIUM BASE TYPE 25000 LIFE IN HOUR PAR38 SHAPE DESIGNATION 1200 LUMEN INTENSITY 4000 80 COLOR RENDERING INDEX SILVER GLASS FINISH COOL WHITE GLASS COLOR 40 DEGREE BEAM SPREAD ANGLE SATCO BRAND ROHS COMPLIANT ENCLOSURE RATING IP65
$
10.43
Qty:
Part #:SATS9480
- PARABOLIC REFLECTOR, DIMMABLE TYPE 5-3/16 INCH UL (CANADA AND US), ETL APPROVAL INDOOR/OUTDOOR LIGHTING, DOWN LIGHTING, TRACK LIGHTING, WET LOCATION APPLICATION 4-3/4 INCH DIAMETER LED LAMP E26 MEDIUM BASE TYPE 25000 LIFE IN HOUR PAR38 SHAPE DESIGNATION SILVER GLASS FINISH RED GLASS COLOR SEALED BEAM SHAPE DESCRIPTION ROHS COMPLIANT ENCLOSURE TYPE IP65 BEAM SPREAD ANGLE (DEG) 40 VOLTAGE RATING (V) 120 WATTAGE (W) 15
$
15.77
Qty:
Part #:SATS9481
- PARABOLIC REFLECTOR, DIMMABLE TYPE 5-3/16 INCH UL (CANADA AND US), ETL APPROVAL INDOOR/OUTDOOR LIGHTING, DOWN LIGHTING, TRACK LIGHTING, WET LOCATION APPLICATION 4-3/4 INCH DIAMETER LED LAMP E26 MEDIUM BASE TYPE 25000 LIFE IN HOUR PAR38 SHAPE DESIGNATION SILVER GLASS FINISH GREEN GLASS COLOR SEALED BEAM SHAPE DESCRIPTION ROHS COMPLIANT ENCLOSURE TYPE IP65 BEAM SPREAD ANGLE (DEG) 40 VOLTAGE RATING (V) 120 WATTAGE (W) 15
$
15.77
Qty:
$
4.90
Qty:
Part #:SATS9643
- A-LINE TYPE 4-9/16 INCH UL, ETL APPROVAL INDOOR RESIDENTIAL AND COMMERCIAL LIGHTING, PARTY BULBS, DISPLAY LIGHTING, ACCENT LIGHTING, DAMP LOCATION APPLICATION 2-3/8 INCH DIAMETER LED LAMP E26 MEDIUM BASE TYPE 15000 LIFE IN HOUR A19 SHAPE DESIGNATION 200 LUMEN INTENSITY GREEN GLASS COLOR ROHS COMPLIANT TEMPERATURE RATING -4 TO 113 DEG F BEAM SPREAD ANGLE (DEG) 220 VOLTAGE RATING (V) 120 WATTAGE (W) 2
$
4.34
Qty:
$
8.11
Qty:
$
6.26
Qty:
$
3.81
Qty:
$
3.81
Qty:
$
15.35
Qty:
$
15.35
Qty:
$
5.46
Qty:
$
5.46
Qty:
$
5.46
Qty:
Displaying: 1 - 24 of 43 Matching Items