Ul 217, Nfpa 72, (Chapter 11) the State of California Fire Marshall, Nfpa 101 (One and Two Family Dwellings), Federal Housing Authority (Fha), Housing and Urban Development (Hud)
Csa File Number: 72632; Ul Specifications: Ul 486a-B; Ul File Number: E9998
View:
Active Filters :
$
57.92
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Part #:ILSAK-4
- ELECTRO-TIN PLATED HEAT TREATED ALUMINUM ALLOY MATERIAL 8 AWG SOLID MIN. RUN CONDUCTOR SIZE 4 AWG STRANDED MAX. RUN CONDUCTOR SIZE 10 AWG SOLID MIN. TAP CONDUCTOR SIZE 4 AWG STRANDED MAX. TAP CONDUCTOR SIZE HEX HEAD SPLIT BOLT WITH SPACER BAR INSTALLATION ALUMINUM/COPPER CONDUCTOR MATERIAL UL 670B, CSA APPROVAL 2000 V VOLTAGE RATING SIZE 0.81 INCH W X 1.38 INCH H TORQUE RATING 165 LB-INCH TEMPERATURE RATING 90 DEG C AK MODEL
$
5.17
Qty:
Part #:AK-2
- ELECTRO-TIN PLATED HEAT TREATED ALUMINUM ALLOY MATERIAL 6 AWG STRANDED (COMPACT) MIN. RUN CONDUCTOR SIZE 2 AWG STRANDED (COMPACT) MAX. RUN CONDUCTOR SIZE 8 AWG STRANDED MIN. TAP CONDUCTOR SIZE 2 AWG STRANDED MAX. TAP CONDUCTOR SIZE HEX HEAD SPLIT BOLT WITH SPACER BAR INSTALLATION ALUMINUM/COPPER CONDUCTOR MATERIAL UL 670B, CSA APPROVAL 2000 V VOLTAGE RATING SIZE 0.94 INCH W X 1.58 INCH H TORQUE RATING 275 LB-INCH TEMPERATURE RATING 90 DEG C AK MODEL
$
7.10
Qty:
Part #:ILSAK-1/0
- ELECTRO-TIN PLATED HEAT TREATED ALUMINUM ALLOY MATERIAL 2 AWG STRANDED (COMPACT) MIN. RUN CONDUCTOR SIZE 1/0 AWG STRANDED (COMPACT) MAX. RUN CONDUCTOR SIZE 8 AWG STRANDED MIN. TAP CONDUCTOR SIZE 1/0 AWG STRANDED MAX. TAP CONDUCTOR SIZE HEX HEAD SPLIT BOLT WITH SPACER BAR INSTALLATION ALUMINUM/COPPER CONDUCTOR MATERIAL UL 670B, CSA APPROVAL 2000 V VOLTAGE RATING SIZE 1 INCH W X 1.92 INCH H TORQUE RATING 385 LB-INCH TEMPERATURE RATING 90 DEG C AK MODEL
$
10.53
Qty:
Part #:MIDWR075GP6
- METERED RINGLESS TYPE G90 GALVANIZED STEEL MATERIAL ZINC COATED FINISH 1 AWG TO 300 KCMIL SOLID/STRANDED (COPPER/ALUMINUM), 12 TO 2 AWG SOLID/STRANDED (COPPER/ALUMINUM, GROUND) WIRE SIZE UL, CUL APPROVAL EARTH BURIAL MOUNTING NEMA 3R ENCLOSURE 100 AMPERE CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION CB250 FIRST POSITION CIRCUIT BREAKER TYPE BR54U LEFT POSITION RECEPTACLE TYPE GFI120 THIRD POSITION CIRCUIT BREAKER TYPE CB130 SECOND POSITION CIRCUIT BREAKER TYPE 5-20R2 RIGHT POSITION RECEPTACLE TYPE R32U CENTER POSITION RECEPTACLE TYPE APPLICABLE STANDARD NEMA, NEC VOLTAGE RATING 120/240 V
$
4,989.88
Qty:
Part #:MIDWGS1101B12UL
- MANUAL TYPE 13 INCH 26 INCH 6-3/4 INCH 12 AWG TO 1/0 KCMIL WIRE SIZE UL (CANADA AND US) APPROVAL GENERATOR APPLICATION 120/240 VAC 1-PHASE VOLTAGE RATING NEMA 3R ENCLOSURE ALUMINUM/COPPER WIRE TYPE 10000 AMPERE SHORT CIRCUIT RATING 100 AMPERE EMERGENCY CURRENT RATING 100 AMPERE MAIN CURRENT RATING CABINET SIZE 13 INCH X 26 INCH NUMBER OF POLES 2 MATERIAL G90 GALVANIZED STEEL FINISH POLYESTER POWDER COATED INCLUDES 1-1/4 INCH HUB
$
568.54
Qty:
Part #:MIDWGS1202B20UL
- MANUAL TYPE 15-3/4 INCH 35 INCH 7 INCH 6 AWG TO 250 KCMIL WIRE SIZE UL (CANADA AND US) APPROVAL GENERATOR APPLICATION 120/240 VAC 1-PHASE VOLTAGE RATING NEMA 3R ENCLOSURE ALUMINUM/COPPER WIRE TYPE 10000 AMPERE SHORT CIRCUIT RATING 200 AMPERE EMERGENCY CURRENT RATING 200 AMPERE MAIN CURRENT RATING CABINET SIZE 15 INCH X 35 INCH NUMBER OF POLES 2 MATERIAL G90 GALVANIZED STEEL FINISH POLYESTER POWDER COATED INCLUDES 2 INCH HUB
$
1,744.81
Qty:
$
182.94
Qty:
Part #:MIDWUG412RMW260
- GFI TYPE 6 TO 2/0 AWG LUG WIRE SIZE G90 GALVANIZED STEEL ENCLOSURE MATERIAL UL, CUL APPROVAL 120/240 V VOLTAGE RATING NEMA 3R ENCLOSURE 10 KILOAMPERE INTERRUPTING RATING 125 AMPERE CURRENT RATING 2 POLE(S) GRAY ENCLOSURE FINISH
$
192.86
Qty:
Part #:MIDWU054
- UNMETERED TYPE UL, CUL APPROVAL 50 AMP CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION 14-50R CENTER POSITION RECEPTACLE TYPE VOLTAGE RATING 120/240 VOLT CABINET DIMENSION 5-3/4 INCH WIDTH X 5-3/16 INCH DEPTH X 7-1/8 INCH HEIGHT MOUNTING TYPE SURFACE
$
70.13
Qty:
Part #:MIDWU013
- UNMETERED TYPE G90 GALVANIZED STEEL MATERIAL ZINC COATED FINISH 14 TO 10 AWG SOLID/STRANDED (COPPER, LINE), 14 TO 10 AWG SOLID/STRANDED (COPPER, NEUTRAL), 12 TO 8 AWG SOLID, 12 TO 2 AWG STRANDED (COPPER, GROUND) WIRE SIZE UL, CUL APPROVAL NEMA 3R ENCLOSURE 30 AMPERE CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION R32U CENTER POSITION RECEPTACLE TYPE APPLICABLE STANDARD NEMA, NEC VOLTAGE RATING 120 V CABINET DIMENSION 5-3/4 INCH W X 5-3/16 INCH D X 7-1/8 INCH H MOUNTING SURFACE
$
71.17
Qty:
Part #:MIDWU075CTL010
- UNMETERED TYPE G90 STEEL MATERIAL ZINC COATED FINISH 14 TO 8 AWG SOLID, 14 TO 1/0 AWG STRANDED (COPPER, LINE), 12 TO 8 AWG SOLID, 12 TO 1/0 AWG STRANDED (ALUMINUM, LINE), 14 TO 8 AWG SOLID, 14 TO 1/0 AWG STRANDED (COPPER, LOAD), 12 TO 8 AWG SOLID, 12 TO 1/0 AWG STRANDED (COPPER, NEUTRAL-LARGE HOLE), 10 TO 8 WIRE SIZE UL, CUL APPROVAL NEMA 3R ENCLOSURE 100 AMP CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION NO ILLUMINATED CB250 FIRST POSITION CIRCUIT BREAKER TYPE BR54U LEFT POSITION RECEPTACLE TYPE CB120 THIRD POSITION CIRCUIT BREAKER TYPE CB130 SECOND POSITION CIRCUIT BREAKER TYPE 5-20R2GFCI RIGHT POSITION RECEPTACLE TYPE R32U CENTER POSITION RECEPTACLE TYPE VOLTAGE RATING 120/240 VOLT CABINET DIMENSION 9-3/4 INCH WIDTH X 5-3/16 INCH DEPTH X 17-3/8 INCH HEIGHT MOUNTING TYPE SURFACE APPLICABLE STANDARD NEMA, NEC
$
279.32
Qty:
Displaying: 1 - 15 of 15 Matching Items