Culus Federal Spec. W-F-408e
Csa, Ul
View:
Active Filters :
Part #:KLE33532-INS
- PHILLIPS, CABINET SCREWDRIVER SET TYPE 2 PIECE(S) HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL BLACK HANDLE COLOR (1) #2 PROFILATED PHILLIPS, (1) 1/4 INCH CABINET SCREWDRIVER SET CONTENT KLEIN BRAND HANDLE TYPE DUAL INSULATED CUSHION GRIP BLADE MATERIAL INDUCTION HARDENED STEEL APPLICATION WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE200028EINS
- HOT-RIVETED JOINT, INSULATED TYPE STEEL MATERIAL 8-1/4 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH CUTS ACSR, SCREWS, NAILS, MOST HARDENED WIRE APPLICATION INDUCTION HARDENED (BODY), FORGED (HANDLE) PROCESS STEEL HANDLE MATERIAL ORANGE/GRAY HANDLE COLOR DIAGONAL, TAPERED NOSE JAW TYPE 2000 SERIES[TM] BRAND HANDLE LENGTH 6-3/4 INCH JAW THICKNESS 7/16 INCH KNIFE LENGTH STANDARD APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE602-4-INS
- CABINET TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR 1/4 INCH TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE603-4-INS
- PHILLIPS TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE6037INS
- PHILLIPS TYPE 11-5/16 INCH OVERALL LENGTH 7 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:HAM18126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 6 INCH 6 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 152.4 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
50.54
Qty:
Part #:HAMCS10106
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
29.97
Qty:
Part #:GC5
- ZINC BODY, STEEL SCREW MATERIAL GROUNDING BARE COPPER WIRE TO PIPE/ROD USED ON (2) SCREW CONNECTOR TO PIPE, (1) SCREW WIRE CONNECTOR INSTALLATION UL 467 APPROVAL 8 AWG SOLID TO 2 AWG STRANDED CONDUCTOR SIZE 1/2 TO 1 INCH IPS SIZE PACKAGING QUANTITY 125
$
8.72
Qty:
Part #:HAMC3R12126HCR
- NEMA 3R ENCLOSURE USED ON HINGE INSTALLATION NEMA 3R ENCLOSURE HAMMOND MANUFACTURING[T] BRAND
$
113.56
Qty:
Part #:HAMCS18124
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 4 INCH 4 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 101.6 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
47.58
Qty:
$
29.67
Qty:
Part #:HAMCS12126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 12 INCH 12 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
38.49
Qty:
Part #:BRID1313-B
- BRONZE BODY, STEEL SCREW MATERIAL GROUNDING BARE COPPER WIRE TO PIPE/ROD USED ON (2) SCREW CONNECTOR TO PIPE, (1) SCREW WIRE CONNECTOR INSTALLATION UL 467 APPROVAL 10 AWG SOLID TO 2 AWG STRANDED CONDUCTOR SIZE 1-1/4 TO 2 INCH IPS SIZE PACKAGING QUANTITY 50
$
15.51
Qty:
Part #:BRID1315-B
- BRONZE BODY, STEEL SCREW MATERIAL GROUNDING BARE COPPER WIRE TO PIPE/ROD USED ON (2) SCREW CONNECTOR TO PIPE, (1) SCREW WIRE CONNECTOR INSTALLATION UL 467 APPROVAL 10 AWG SOLID TO 2 AWG STRANDED CONDUCTOR SIZE 2-1/2 TO 4 INCH IPS SIZE PACKAGING QUANTITY 5
$
51.32
Qty:
Part #:STCMCN034
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL 514B APPROVAL 125 STANDARD PACKAGE 3/4 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
0.76
Qty:
Part #:STCMCN300
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL 514B APPROVAL 4 STANDARD PACKAGE 3 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
16.18
Qty:
Part #:HAMC3R18186SC
- UNFLANGED TYPE FORMED SPOT WELDED STEEL MATERIAL GALVANIZED, POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 18 INCH 18 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 6 INCH 6 DEPTH IN INCH 457.2 HEIGHT IN MM 457.2 WIDTH IN MM UL 50, CSA APPROVAL 152.4 DEPTH IN MM WALL MOUNTING NEMA 3R, IP32 ENCLOSURE SLIP ON WITH SCREW, PADLOCKABLE HASP COVER TYPE 16/14 GAUGE MATERIAL SPECIFICATION (4) (0.875 INCH-1.125 INCH), (5) (1.125 INCH-1.375 INCH) CONCENTRIC KNOCKOUT KNOCKOUT SIZE 9 KNOCKOUT(S) BOTTOM KNOCKOUT LOCATION HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
136.08
Qty:
Part #:HAMCS18186
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 18 INCH 18 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
67.54
Qty:
Part #:HAMCS24248
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 24 INCH 24 INCH 8 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
169.20
Qty:
Part #:STCMCN012
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL 514B APPROVAL 250 STANDARD PACKAGE 1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
0.59
Qty:
Part #:STCMCN100
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL 514B APPROVAL 75 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
1.20
Qty:
Part #:STCMCN114
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL 514B APPROVAL 20 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
2.23
Qty:
Part #:STCMCN112
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL 514B APPROVAL 5 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
3.29
Qty:
Part #:STCMCN200
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL 514B APPROVAL 10 STANDARD PACKAGE 2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
4.79
Qty:
Displaying: 1 - 24 of 43 Matching Items