Culus Listed, Rohs Compliant, Csaus Certification 246030, Energy Star Approved
Csa, Ul
View:
Active Filters :
- Standard: Csa, Ul Culus Listed, Rohs Compliant, Csaus Certification 246030, Energy Star Approved Energy Star Approved, Ul Listed, Culus Listed E467698 Ul 217, Nfpa 72, (Chapter 11) the State of California Fire Marshall, Nfpa 101 (One and Two Family Dwellings), Federal Housing Authority (Fha), Housing and Urban Development (Hud)
closeout
$
9.95
Qty:
closeout
$
10.95
Qty:
closeout
$
11.95
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Part #:HAM18126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 6 INCH 6 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 152.4 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
50.54
Qty:
Part #:HAMCS10106
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
29.97
Qty:
Part #:HAMC3R12126HCR
- NEMA 3R ENCLOSURE USED ON HINGE INSTALLATION NEMA 3R ENCLOSURE HAMMOND MANUFACTURING[T] BRAND
$
113.56
Qty:
Part #:HAMCS18124
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 4 INCH 4 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 101.6 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
47.58
Qty:
$
29.67
Qty:
Part #:HAMCS12126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 12 INCH 12 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
38.49
Qty:
Part #:HAMC3R18186SC
- UNFLANGED TYPE FORMED SPOT WELDED STEEL MATERIAL GALVANIZED, POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 18 INCH 18 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 6 INCH 6 DEPTH IN INCH 457.2 HEIGHT IN MM 457.2 WIDTH IN MM UL 50, CSA APPROVAL 152.4 DEPTH IN MM WALL MOUNTING NEMA 3R, IP32 ENCLOSURE SLIP ON WITH SCREW, PADLOCKABLE HASP COVER TYPE 16/14 GAUGE MATERIAL SPECIFICATION (4) (0.875 INCH-1.125 INCH), (5) (1.125 INCH-1.375 INCH) CONCENTRIC KNOCKOUT KNOCKOUT SIZE 9 KNOCKOUT(S) BOTTOM KNOCKOUT LOCATION HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
136.08
Qty:
Part #:HAMCS18186
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 18 INCH 18 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
67.54
Qty:
Part #:HAMCS24248
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 24 INCH 24 INCH 8 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
169.20
Qty:
Part #:HAMC3RWT436
- 14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 36 INCH 4 INCH 4 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$
88.27
Qty:
Part #:HAMC3RWT448
- 14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 48 INCH 4 INCH 4 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$
111.69
Qty:
Part #:HAMCS664
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 6 INCH 6 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
13.24
Qty:
Part #:HAMCS884
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
18.72
Qty:
Part #:HAMCS886
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
23.27
Qty:
Part #:HAMCSKO664
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 6 INCH 6 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 16/14 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE (2) (1/2 INCH-3/4 INCH), (1) (3/4 INCH-1 INCH) CONCENTRIC KNOCKOUT TOP/BOTTOM/SIDES KNOCKOUT SIZE 12 KNOCKOUT(S) (3) TOP, (3) BOTTOM, (6) SIDES KNOCKOUT LOCATION ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CSKO MODEL
$
13.24
Qty:
Part #:HAMC3R664HCR
- NEMA 3R ENCLOSURE USED ON HINGE INSTALLATION NEMA 3R ENCLOSURE HAMMOND MANUFACTURING[T] BRAND
$
54.64
Qty:
Displaying: 1 - 24 of 32 Matching Items