Culus Nema Fb-1, Nec Article 345 & 346
Csa, Ul
View:
Active Filters :
Part #:KLE33532-INS
- PHILLIPS, CABINET SCREWDRIVER SET TYPE 2 PIECE(S) HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL BLACK HANDLE COLOR (1) #2 PROFILATED PHILLIPS, (1) 1/4 INCH CABINET SCREWDRIVER SET CONTENT KLEIN BRAND HANDLE TYPE DUAL INSULATED CUSHION GRIP BLADE MATERIAL INDUCTION HARDENED STEEL APPLICATION WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE200028EINS
- HOT-RIVETED JOINT, INSULATED TYPE STEEL MATERIAL 8-1/4 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH CUTS ACSR, SCREWS, NAILS, MOST HARDENED WIRE APPLICATION INDUCTION HARDENED (BODY), FORGED (HANDLE) PROCESS STEEL HANDLE MATERIAL ORANGE/GRAY HANDLE COLOR DIAGONAL, TAPERED NOSE JAW TYPE 2000 SERIES[TM] BRAND HANDLE LENGTH 6-3/4 INCH JAW THICKNESS 7/16 INCH KNIFE LENGTH STANDARD APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE602-4-INS
- CABINET TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR 1/4 INCH TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE603-4-INS
- PHILLIPS TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE6037INS
- PHILLIPS TYPE 11-5/16 INCH OVERALL LENGTH 7 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:HAM18126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 6 INCH 6 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 152.4 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
50.54
Qty:
Part #:10104SCNKOGRAYN1
- UNFLANGED TYPE STEEL MATERIAL ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 4 INCH UL 50, CSA C22.2, IEC 529 APPROVAL WALL MOUNT MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE APPLICATION WIRING BOXES, JUNCTION AND PULL BOXES
$
21.75
Qty:
Part #:10106SCNKOGALVN1
- UNFLANGED TYPE STEEL MATERIAL GALVANIZED, ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, CSA C22.2, IEC 529 APPROVAL WALL MOUNT MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE APPLICATION WIRING BOXES, JUNCTION AND PULL BOXES
$
20.47
Qty:
Part #:HAMCS10106
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
29.97
Qty:
Part #:HAMC3R12126HCR
- NEMA 3R ENCLOSURE USED ON HINGE INSTALLATION NEMA 3R ENCLOSURE HAMMOND MANUFACTURING[T] BRAND
$
113.56
Qty:
Part #:HAMCS18124
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 4 INCH 4 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 101.6 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
47.58
Qty:
$
29.67
Qty:
Part #:HAMCS12126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 12 INCH 12 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
38.49
Qty:
Part #:12128SCWKOGALVN1
- STEEL MATERIAL ACRYLIC ELECTROCOATED OVER GALVANIZED SURFACE FINISH ANSI 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 12 INCH 12 HEIGHT IN INCH 8 INCH 304.8 HEIGHT IN MM UL 50, CSA 22.2 APPROVAL WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION (2) (1/2 INCH - 3/4 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (2) (3/4 INCH - 1 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (1) (1 INCH - 1 1/4 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (2) (1/2 INCH - 3/4 INCH) CONDUIT CONCENTRIC KNOCKOUT BOTTOM, (2) (3/4 INCH - 1 KNOCKOUT SIZE 20 KNOCKOUT(S) (5) TOP, (5) BOTTOM, (10) SIDES KNOCKOUT LOCATION B-LINE. BRAND APPLICABLE STANDARD IEC 529 PANEL NONE HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN
$
53.93
Qty:
Part #:WH012
- MALE THREADED TYPE DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 1/2 INCH TRADE SIZE WATERTIGHT INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD NEMA FB-1 ENCLOSURE TYPE NEMA 2/3/3R/4/5/12/13 INSULATION TEMPERATURE 105 DEC C
$
4.16
Qty:
Part #:WH100
- MALE THREADED TYPE DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 1 INCH TRADE SIZE WATERTIGHT INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD NEMA FB-1 ENCLOSURE TYPE NEMA 2/3/3R/4/5/12/13 INSULATION TEMPERATURE 105 DEC C
$
5.90
Qty:
Part #:WH114
- MALE THREADED TYPE DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 1-1/4 INCH TRADE SIZE WATERTIGHT INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD NEMA FB-1 ENCLOSURE TYPE NEMA 2/3/3R/4/5/12/13 INSULATION TEMPERATURE 105 DEC C
$
7.54
Qty:
Part #:WH200
- MALE THREADED TYPE DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 2 INCH TRADE SIZE WATERTIGHT INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD NEMA FB-1 ENCLOSURE TYPE NEMA 2/3/3R/4/5/12/13 INSULATION TEMPERATURE 105 DEC C
$
11.05
Qty:
Part #:WH212
- MALE THREADED TYPE DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 2-1/2 INCH TRADE SIZE WATERTIGHT INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD NEMA FB-1 ENCLOSURE TYPE NEMA 2/3/3R/4/5/12/13 INSULATION TEMPERATURE 105 DEC C
$
19.29
Qty:
Part #:WH300
- MALE THREADED TYPE DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 3 INCH TRADE SIZE WATERTIGHT INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD NEMA FB-1 ENCLOSURE TYPE NEMA 2/3/3R/4/5/12/13 INSULATION TEMPERATURE 105 DEC C
$
37.61
Qty:
Part #:WH312
- MALE THREADED TYPE DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 3-1/2 INCH TRADE SIZE WATERTIGHT INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD NEMA FB-1 ENCLOSURE TYPE NEMA 2/3/3R/4/5/12/13 INSULATION TEMPERATURE 105 DEC C
$
62.83
Qty:
Part #:WH034
- MALE THREADED TYPE DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 3/4 INCH TRADE SIZE WATERTIGHT INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD NEMA FB-1 ENCLOSURE TYPE NEMA 2/3/3R/4/5/12/13 INSULATION TEMPERATURE 105 DEC C
$
4.89
Qty:
Part #:WH112
- MALE THREADED TYPE DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 1-1/2 INCH TRADE SIZE WATERTIGHT INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD NEMA FB-1 ENCLOSURE TYPE NEMA 2/3/3R/4/5/12/13 INSULATION TEMPERATURE 105 DEC C
$
8.19
Qty:
Part #:WH400
- MALE THREADED TYPE DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 4 INCH TRADE SIZE WATERTIGHT INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD NEMA FB-1 ENCLOSURE TYPE NEMA 2/3/3R/4/5/12/13 INSULATION TEMPERATURE 105 DEC C
$
52.00
Qty:
Displaying: 1 - 24 of 44 Matching Items