Ul 217, Nfpa 72, (Chapter 11) the State of California Fire Marshall, Nfpa 101 (One and Two Family Dwellings), Federal Housing Authority (Fha), Housing and Urban Development (Hud)
Culus and Csa
View:
$
112.50
Qty:
$
60.00
Qty:
$
60.00
Qty:
Part #:ARL40AST
- Zinc die-cast, 1/2" Knockout MC cable connector snaps quickly on to the conduit with an internal spring steel clip and then snaps into knockout with external spring steel clip, no tools required. Concrete tight when taped. Red tinted internal clip indicates easier insertion of conduit and comes with Insulated throat.
$
1.31
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Part #:ALM9313-EWK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 5-15/16 INCH 3-1/4 INCH 2-7/8 INCH 3 GANG(S) UL 514C APPROVAL (4) EARS, WING BRACKET MOUNTING 25 STANDARD PACKAGE 42.5 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9313-EW MODEL
$
5.76
Qty:
Part #:ALM9331-ESK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-1/2 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 14 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9331-ES MODEL
$
2.06
Qty:
Part #:ALM9342-HN
- MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4 INCH 4 INCH 2-1/4 INCH UL 514C APPROVAL (2) NAIL, HN HANGER MOUNTING 50 STANDARD PACKAGE 27.3 CU INCH CAPACITY (2) WIRE CLAMPS CABLE ENTRY FIBERGLASSBOX[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (WIRE CLAMP/BRACKET), ZINC PLATED STEEL (SCREW) USED ON NON-METALLIC SHEATHED CABLE
$
3.05
Qty:
Part #:ALM9343-NK
- MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4-1/16 INCH 4-1/16 INCH 2-1/2 INCH UL 514C APPROVAL (2) NAILS MOUNTING 50 STANDARD PACKAGE 32.3 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY FIBERGLASSBOX[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), ZINC PLATED STEEL (SCREW), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE
$
4.16
Qty:
$
1.99
Qty:
Part #:ALM9361-ESK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-7/8 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 16 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9361-ES MODEL
$
3.27
Qty:
Part #:ALM9363-EWK
- GANGABLE, WALL, OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-27/32 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, WING BRACKET MOUNTING 100 STANDARD PACKAGE 16 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (EAR/WING), ZINC COATED STEEL (WING SCREW) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 9363-EW MODEL
$
2.81
Qty:
Part #:ALM2302-NK
- GANGABLE, WALL, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4 INCH 3-3/4 INCH 3-7/16 INCH 2 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 50 STANDARD PACKAGE 37 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), PVC (SPEED CLAMP) APPLICATION RESIDENTIAL 2302-NK MODEL
$
3.08
Qty:
Part #:ALM3303-NK
- GANGABLE, WALL, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 5-11/16 INCH 3-3/4 INCH 3-9/16 INCH 3 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 20 STANDARD PACKAGE 56.5 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 3303-NK MODEL
$
4.31
Qty:
Part #:ALM4304-NK
- GANGABLE, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 7-1/2 INCH 3-3/4 INCH 3-9/16 INCH 4 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 20 STANDARD PACKAGE 75 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND 4304-NK MODEL
$
6.20
Qty:
Part #:ALM5305-NBK
- NEW WORK TYPE FIBERGLASS REINFORCED POLYESTER BMC MATERIAL 9-5/16 INCH 3-3/4 INCH 3-9/16 INCH 5 GANG(S) ANSI/UL 514C APPROVAL ANGLED MID NAIL, ADJUSTABLE STABILIZING BAR MOUNTING 6 PER CARTON STANDARD PACKAGE 94 CUBIC INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE ALLIED MOULDED BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (BRACKET), PLATED CARBON STEEL (FASTENER, CLAMP) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL
$
23.54
Qty:
Part #:ALM9312-EWK
- GANGABLE, WALL, OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4-1/8 INCH 3-1/4 INCH 2-3/4 INCH 2 GANG(S) UL 514C APPROVAL (4) EARS, WING BRACKET MOUNTING 50 STANDARD PACKAGE 28 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (EAR/WING), ZINC COATED STEEL (WING SCREW), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 9312-EW MODEL
$
4.18
Qty:
Part #:ALM9338-ESK
- WALL FIXTURE TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2 INCH UL 514C APPROVAL 3-1/2 INCH DIAMETER (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 14 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN FIXTURE RATING 15 LB 9338-ES MODEL
$
3.23
Qty:
Part #:ALM9368-EWK
- GANGABLE, WALL, OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 3-3/16 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, WING BRACKET MOUNTING 100 STANDARD PACKAGE 18 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (EAR) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 9368-EW MODEL
$
3.29
Qty:
Displaying: 1 - 23 of 23 Matching Items