Ideal Where High Brightness and Good Illumination Levels Are Required Such as Retail, Light Industrial and Warehouses
Dimmable: Non-Dimmable ; Operating Temp: -20c (-4f) to a Maximum of +45c (+113f) ; Power Factor: 0.91 ; Safety Listing: Culus - Damp ; Sds Class: led_lamp ; Tested Lumens: 1600
View:
Active Filters :
- Special Features: Dimmable: Non-Dimmable ; Operating Temp: -20c (-4f) to a Maximum of +45c (+113f) ; Power Factor: 0.91 ; Safety Listing: Culus - Damp ; Sds Class: led_lamp ; Tested Lumens: 1600 Ideal Where High Brightness and Good Illumination Levels Are Required Such as Retail, Light Industrial and Warehouses Intermateability Ul Listed and Csa Certified Interchangeability With Competitive Products. Suitable for Wet Locations When Used With Gaskets. Innovative Spring Clip Design for Installation Ease and Repeat Usage. Smooth Integral Wire Bushings Protects Cabl Reinforced Rib & Holes for Extra Strength, Snap-on Feature
$
5.46
Qty:
$
5.46
Qty:
$
5.46
Qty:
$
20.57
Qty:
$
20.57
Qty:
Part #:G1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH IMC/RIGID CONDUIT USED ON 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.17
Qty:
Part #:E1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.562 INCH EMT CONDUIT USED ON UL APPROVAL 1000 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.12
Qty:
Part #:E1H034
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH EMT CONDUIT USED ON UL APPROVAL 500 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.16
Qty:
Part #:LITHTC232-MV
- TANDEM CHANNEL TYPE 96 INCH 4-3/8 INCH 2-1/16 INCH 48 INCH LAMP LENGTH 8 FT NOMINAL LENGTH ELECTRONIC, INSTANT START BALLAST TYPE 2 LAMP(S) 32WT8 LAMP TYPE 120 TO 277 V AT 50/60 HZ LAMP/BALLAST VOLTAGE MATERIAL HIGH GLOSS BAKED WHITE ENAMEL STEEL APPLICATION INDUSTRIAL AND WAREHOUSE APPROVAL UL (CANADA AND US) SERIES TC MODEL
$
61.58
Qty:
Part #:LITHZ117-MV
- LOW PROFILE TYPE 24 INCH 2-1/8 INCH 1-1/2 INCH 24 INCH LAMP LENGTH ELECTRONIC, HPF BALLAST TYPE 1 LAMP(S) 17WT8 LAMP TYPE 120 TO 277 V AT 50/60 HZ LAMP/BALLAST VOLTAGE MATERIAL HIGH GLOSS BAKED WHITE ENAMEL STEEL APPLICATION COMMERCIAL, RETAIL, MANUFACTURING, WAREHOUSE, COVE APPROVAL UL, CUL, CSA SERIES Z MODEL
$
41.67
Qty:
Part #:LITHZ125-MV
- LOW PROFILE TYPE 36 INCH 2-1/8 INCH 1-1/2 INCH 36 INCH LAMP LENGTH ELECTRONIC, HPF BALLAST TYPE 1 LAMP(S) 25WT8 LAMP TYPE 120 TO 277 V AT 50/60 HZ LAMP/BALLAST VOLTAGE MATERIAL HIGH GLOSS BAKED WHITE ENAMEL STEEL APPLICATION COMMERCIAL, RETAIL, MANUFACTURING, WAREHOUSE, COVE APPROVAL UL, CUL, CSA SERIES Z MODEL
$
65.30
Qty:
Part #:LITHZ232-MV
- LOW PROFILE TYPE 48 INCH 2-1/8 INCH 1-1/2 INCH 48 INCH LAMP LENGTH ELECTRONIC, HPF BALLAST TYPE 2 LAMP(S) 32WT8 LAMP TYPE 120 TO 277 V AT 50/60 HZ LAMP/BALLAST VOLTAGE MATERIAL HIGH GLOSS BAKED WHITE ENAMEL FINISHED CODE GAUGE STEEL APPROVAL UL, CUL, CSA APPLICATION COMMERCIAL, RETAIL, MANUFACTURING, WAREHOUSE, COVE Z MODEL
$
31.59
Qty:
Part #:LITHTZ232-MV
- TANDEM CHANNEL, LOW PROFILE TYPE 96 INCH 2-1/8 INCH 1-1/2 INCH 48 INCH LAMP LENGTH ELECTRONIC, HPF BALLAST TYPE 2 LAMP(S) 32WT8 LAMP TYPE 120 TO 277 V AT 50/60 HZ LAMP/BALLAST VOLTAGE MATERIAL HIGH GLOSS BAKED WHITE ENAMEL FINISHED CODE GAUGE STEEL APPROVAL UL, CUL, CSA APPLICATION COMMERCIAL, RETAIL, MANUFACTURING, WAREHOUSE, COVE Z MODEL
$
45.63
Qty:
Part #:KILLLB27
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 5-3/8 INCH L X 2-1/2 INCH W X 1-3/4 INCH H SIZE RIGID CONDUIT/IMC USED ON 3/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE 90 DEG HUB LOCATION FORM 7 FORM TYPE BACK ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
16.60
Qty:
Part #:KILLLB37
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 6-5/16 INCH L X 3 INCH W X 1-15/16 INCH H SIZE RIGID CONDUIT/IMC USED ON 1 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE 90 DEG HUB LOCATION FORM 7 FORM TYPE BACK ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
18.28
Qty:
Part #:KILLLB47
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 6-13/16 INCH L X 3-1/2 INCH W X 2-5/16 INCH H SIZE RIGID CONDUIT/IMC USED ON 1-1/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE 90 DEG HUB LOCATION FORM 7 FORM TYPE BACK ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
29.28
Qty:
Part #:KILLLB67
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 8-1/4 INCH L X 4-5/16 INCH W X 3-1/6 INCH H SIZE RIGID CONDUIT/IMC USED ON 2 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE 90 DEG HUB LOCATION FORM 7 FORM TYPE BACK ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
65.63
Qty:
Part #:KILLT27
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 6-5/16 INCH L X 2-1/16 INCH W X 2-3/4 INCH H SIZE RIGID CONDUIT/IMC USED ON 3/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION T CONFIGURATION 3 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE TEE HUB LOCATION FORM 7 FORM TYPE SIDE ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
15.26
Qty:
Part #:KILLT37
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 7-5/8 INCH L X 2-1/4 INCH W X 3-1/4 INCH H SIZE RIGID CONDUIT/IMC USED ON 1 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION T CONFIGURATION 3 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE TEE HUB LOCATION FORM 7 FORM TYPE SIDE ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
23.03
Qty:
Part #:KILLT67
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 9-7/16 INCH L X 3-1/8 INCH W X 4-1/4 INCH H SIZE RIGID CONDUIT/IMC USED ON 2 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION T CONFIGURATION 3 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE TEE HUB LOCATION FORM 7 FORM TYPE SIDE ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
69.53
Qty:
Part #:KILLC37
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 7-7/16 INCH L X 1-7/8 INCH W X 1-15/16 INCH H SIZE RIGID CONDUIT/IMC USED ON 1 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION C CONFIGURATION 2 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE STRAIGHT HUB LOCATION FORM 7 FORM TYPE SIDE ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
18.28
Qty:
Part #:KILLC57
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 8-7/16 INCH L X 2-9/16 INCH W X 2-1/2 INCH H SIZE RIGID CONDUIT/IMC USED ON 1-1/2 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION C CONFIGURATION 2 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE STRAIGHT HUB LOCATION FORM 7 FORM TYPE SIDE ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
37.77
Qty:
Part #:KILLC67
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 9-7/16 INCH L X 3-1/8 INCH W X 3-1/16 INCH H SIZE RIGID CONDUIT/IMC USED ON 2 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION C CONFIGURATION 2 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE STRAIGHT HUB LOCATION FORM 7 FORM TYPE SIDE ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
62.30
Qty:
Part #:KILLTB27
- ELECTROSTATICALLY APPLIED POWDER COATED OVER ELECTRO ZINC AND CHROMATE SEALANT CLASS 30 GRAY IRON ALLOY MATERIAL 6-5/16 INCH L X 2-7/8 INCH W X 1-7/8 INCH H SIZE RIGID CONDUIT/IMC USED ON 3/4 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION TB CONFIGURATION 3 HUB(S) UL, CSA APPROVAL STAINLESS STEEL COVER TYPE TEE BACK HUB LOCATION FORM 7 FORM TYPE BACK ACCESS OPENING DURALOY[R] BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-C-586D/A-A 50563 7 MODEL
$
16.93
Qty:
Displaying: 1 - 24 of 36 Matching Items