Flame Retardant and Impact Resistant Handle
Dimmable: Non-Dimmable ; Operating Temp: -20c (-4f) to a Maximum of +45c (+113f) ; Power Factor: 0.91 ; Safety Listing: Culus - Damp ; Sds Class: led_lamp ; Tested Lumens: 1600
View:
Active Filters :
- Special Features: Dimmable: Non-Dimmable ; Operating Temp: -20c (-4f) to a Maximum of +45c (+113f) ; Power Factor: 0.91 ; Safety Listing: Culus - Damp ; Sds Class: led_lamp ; Tested Lumens: 1600 Flame Retardant and Impact Resistant Handle Reinforced Rib & Holes for Extra Strength, Snap-on Feature Watertight p&s Plugs
Part #:CWDAH416P6W
- Plug Pin&Sleeve 16A 380-415V 3P4W WT RD 4732218
$
116.92
Qty:
Part #:CWDAH460P7W
- Plug Pin&Sleeve 60A 480V 3PH 3P4W WT RD 4732478
$
362.60
Qty:
Part #:CWDAH460P9W
- STRAIGHT TYPE NYLON PA6 MATERIAL 0.66 INCH MIN. CABLE OUTER DIAMETER 1.5 INCH MAX. CABLE OUTER DIAMETER 4 WIRE(S) UL 1682, UL 1686, CUL, CSA C22.2 APPROVAL 250 VAC 3-PHASE VOLTAGE RATING 60 AMPERE CURRENT RATING 3 POLE(S) WATERTIGHT ARROW HART[R] BRAND APPLICABLE STANDARD IEC 60309-1/60309-2 FLAMMABILITY RATING UL 94- HB (HOUSING), UL 94-V0 (CONTACT CARRIERS) AH MODEL
$
362.60
Qty:
$
325.60
Qty:
$
5.46
Qty:
$
5.46
Qty:
$
5.46
Qty:
$
20.57
Qty:
$
20.57
Qty:
Part #:KLE33532-INS
- PHILLIPS, CABINET SCREWDRIVER SET TYPE 2 PIECE(S) HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL BLACK HANDLE COLOR (1) #2 PROFILATED PHILLIPS, (1) 1/4 INCH CABINET SCREWDRIVER SET CONTENT KLEIN BRAND HANDLE TYPE DUAL INSULATED CUSHION GRIP BLADE MATERIAL INDUCTION HARDENED STEEL APPLICATION WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE200028EINS
- HOT-RIVETED JOINT, INSULATED TYPE STEEL MATERIAL 8-1/4 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH CUTS ACSR, SCREWS, NAILS, MOST HARDENED WIRE APPLICATION INDUCTION HARDENED (BODY), FORGED (HANDLE) PROCESS STEEL HANDLE MATERIAL ORANGE/GRAY HANDLE COLOR DIAGONAL, TAPERED NOSE JAW TYPE 2000 SERIES[TM] BRAND HANDLE LENGTH 6-3/4 INCH JAW THICKNESS 7/16 INCH KNIFE LENGTH STANDARD APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE602-4-INS
- CABINET TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR 1/4 INCH TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE603-4-INS
- PHILLIPS TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE6037INS
- PHILLIPS TYPE 11-5/16 INCH OVERALL LENGTH 7 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:G1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH IMC/RIGID CONDUIT USED ON 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.17
Qty:
Part #:E1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.562 INCH EMT CONDUIT USED ON UL APPROVAL 1000 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.12
Qty:
Part #:E1H034
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH EMT CONDUIT USED ON UL APPROVAL 500 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.16
Qty:
Part #:E1H100
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.75 INCH EMT CONDUIT USED ON UL APPROVAL 500 STANDARD PACKAGE 1 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.27
Qty:
Part #:E1H112
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1 INCH EMT CONDUIT USED ON 100 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.95
Qty:
Part #:E1H114
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH EMT CONDUIT USED ON 200 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.44
Qty:
Part #:E1H200
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1.125 INCH EMT CONDUIT USED ON 100 STANDARD PACKAGE 2 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.95
Qty:
Part #:G1H034
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.75 INCH IMC/RIGID CONDUIT USED ON 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.30
Qty:
Part #:G1H100
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON 200 STANDARD PACKAGE 1 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.45
Qty:
Part #:G1H112
- 1-HOLE, SNAP-ON, RIBBED TYPE 11 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON 100 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.437 INCH HOLE/BOLT SIZE
$
1.01
Qty:
Displaying: 1 - 24 of 26 Matching Items