Dimmable: Non-Dimmable ; Operating Temp: -20c (-4f) to a Maximum of +45c (+113f) ; Power Factor: 0.91 ; Safety Listing: Culus - Damp ; Sds Class: led_lamp ; Tested Lumens: 1600
Caps Unused Knockout Holes in Box or Enclosure; Nylon Snaps in With Fingertip Pressure
View:
Active Filters :
- Special Features: Caps Unused Knockout Holes in Box or Enclosure; Nylon Snaps in With Fingertip Pressure Dimmable: Non-Dimmable ; Operating Temp: -20c (-4f) to a Maximum of +45c (+113f) ; Power Factor: 0.91 ; Safety Listing: Culus - Damp ; Sds Class: led_lamp ; Tested Lumens: 1600 Smoothstart Pilot Drill Prevents Carbide Damage by Gradually Guiding Cutter to Material; Precision-Ground Carbide Teeth for Fast Cutting of Clean, Round Holes; Designed Specifically for Sheet Metal Cutting, Even Stainless-Steel; Over Drill Flange Built-in Wallbox Occupancy Sensor
Part #:CWDOS306UBK
- SENSOR WITH RELAY TYPE 1.55 INCH WIDTH X 1.85 INCH DEPTH X 2.6 INCH HEIGHT SIZE BLACK FINISH UL (CANADA AND US), NOM 426 APPROVAL INDOOR APPLICATION 120 VOLT AC VOLTAGE RATING WALL MOUNTING 600 WATT AT 120 VOLT AC AT 60 HERTZ (INCANDESCENT), 600 WATT AT 120 VOLT AC AT 60 HERTZ (FLUORESCENT), 1/4 HP AT 120 V (MOTOR) LOAD RATING 180 DEGREE FIELD OF VIEW PASSIVE INFRARED SENSOR TYPE 450 SQUARE FOOT AREA COVERAGE INCANDESCENT/FLUORESCENT/MOTOR LOAD TYPE 5 TO 30 MINUTE TIME DELAY ROHS COMPLIANT CALIFORNIA TITLE 24 COMPLIANT MATERIAL INJECTION MOLDED POLYCARBONATE RESIN HOUSING, REINFORCED TAMPER RESISTANT FRESNEL LENS WIRING TYPE 1-POLE/3 WAY TEMPERATURE RATING 32 TO 104 DEG F
$
37.84
Qty:
$
58.47
Qty:
$
4.88
Qty:
$
4.88
Qty:
$
4.88
Qty:
$
19.73
Qty:
$
19.73
Qty:
Part #:KO100
- SNAP-IN TYPE STEEL MATERIAL 1 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 500
$
0.68
Qty:
Part #:KO034
- SNAP-IN TYPE STEEL MATERIAL 3/4 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 500
$
0.45
Qty:
Part #:KO114
- SNAP-IN TYPE STEEL MATERIAL 1-1/4 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 250
$
0.65
Qty:
Part #:KO112
- SNAP-IN TYPE STEEL MATERIAL 1-1/2 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 250
$
1.34
Qty:
Part #:KO200
- SNAP-IN TYPE STEEL MATERIAL 2 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 200
$
1.28
Qty:
Part #:KO012
- SNAP-IN TYPE STEEL MATERIAL 1/2 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 1000
$
0.31
Qty:
Part #:IDE36-301
- TKO Carbide Tipped Hole Cutter, 7/8 IN Hole, For 1/2 IN Conduit Pipe
$
36.12
Part #:IDE36-303
- TKO Carbide Tipped Hole Cutter, 1-1/8 IN Hole, For 3/4 IN Conduit Pipe
$
49.02
Part #:IDE36-311
- CARBIDE TIPPED MATERIAL 4 PIECE(S) CARRYING CASE PACKAGING TYPE 36-301/36-303/36-305 HOLE CUTTER, SMOOTHSTART 36-312 PILOT BIT CONTENT 7/8 INCH, 1 -1/8 INCH, 1-3/8 INCH HOLE SAW SIZE IDEAL BRAND HEX KEY SIZE 3 MILLIMETER
$
148.70
Displaying: 1 - 18 of 18 Matching Items