Etcon
EATON CORPORATION
View:
Active Filters :
- Mfr / Trade Name: EATON CORPORATION Etcon Ipex USA KIDDE
Part #:CUTTP480
- FLAT TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 4 INCH BOX SIZE (1) DEVICE OPENING TYPE ROUNDED CORNER TYPE NUMBER OF GANGS 1
$
1.72
Qty:
Part #:CUTTP494
- FLAT TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 4 INCH BOX SIZE (2) DEVICE OPENING TYPE ROUNDED CORNER TYPE NUMBER OF GANGS 2
$
1.13
Qty:
Qty:
Part #:CUTBW2100
- THERMAL MAGNETIC TYPE ECB UNIT ENCLOSURE USED ON 2 AWG TO 300 KCMIL (ALUMINUM/COPPER) WIRE SIZE UL 489, CSA APPROVAL 120/240 VAC VOLTAGE RATING 10 KILOAMPERE INTERRUPTING RATING 100 AMPERE CURRENT RATING 2 POLE(S) LINE TERMINAL TERMINAL TYPE BW MODEL
$
119.55
Qty:
Part #:CUTEDB2150
- THERMAL MAGNETIC, MOLDED CASE TYPE 2.75 INCH W X 3.38 INCH D X 6 INCH H SIZE 240 MAX. AC VOLTAGE RATING 125 MAX. DC VOLTAGE RATING 240 VAC AT 50/60 HZ, 125 VDC (UL) 220/240 VAC AT 50/60 HZ, 125 VDC (IEC) VOLTAGE RATING 22 KILOAMPERE AT 240 VAC, 10 KILOAMPERE AT 125 VDC (UL) 22 KILOAMPERE AT 220/240 VAC, 10 KILOAMPERE AT 125 VDC (IEC) INTERRUPTING RATING 150 AMPERE CURRENT RATING 2 POLE(S) STANDARD PRESSURE LINE TERMINAL, STANDARD PRESSURE LOAD TERMINAL TERMINAL TYPE F FRAME TYPE CUTLER-HAMMER[R] BRAND MAXIMUM AC VOLTAGE RATING - UOM V MAXIMUM DC VOLTAGE RATING - UOM V EDB MODEL
$
510.48
Qty:
Part #:CUTBW2150
- THERMAL MAGNETIC MAIN TYPE LOAD CENTER USED ON 2 AWG TO 300 KCMIL (ALUMINUM/COPPER) WIRE SIZE UL 489 APPROVAL 208 VAC STAR/120 VAC 240 VAC VOLTAGE RATING 10 KILOAMPERE INTERRUPTING RATING 150 AMPERE CURRENT RATING 2 POLE(S)
$
105.76
Qty:
Part #:CUTBW2200
- THERMAL MAGNETIC MAIN TYPE LOAD CENTER USED ON 2 AWG TO 300 KCMIL (ALUMINUM/COPPER) WIRE SIZE UL 489 APPROVAL 208 VAC STAR/120 VAC 240 VAC VOLTAGE RATING 10 KILOAMPERE INTERRUPTING RATING 200 AMPERE CURRENT RATING 2 POLE(S)
$
119.55
Qty:
Part #:CUTKD3400
- MOLDED CASE THERMAL MAGNETIC TYPE 5.5 INCH W X 4.063 INCH D X 10.125 INCH H SIZE 600 MAX. AC VOLTAGE RATING 600 VAC AT 50/60 HZ VOLTAGE RATING 65 KILOAMPERE AT 240 VAC 35 KILOAMPERE AT 480 VAC 25 KILOAMPERE AT 600 VAC 10 KILOAMPERE AT 250 VDC (NEMA/UL/CSA) 65 KILOAMPERE AT 240 VAC 40 KILOAMPERE AT 380/415 VAC 10 KILOAMPERE AT 250 VDC (IEC) INTERRUPTING RATING 400 AMPERE AT 40 DEG C CURRENT RATING 3 POLE(S) ALUMINUM/COPPER STANDARD PRESSURE LINE TERMINAL STANDARD PRESSURE LOAD TERMINAL TERMINAL TYPE KD FRAME TYPE APPLICABLE STANDARD IEC 157-1 MAXIMUM AC VOLTAGE RATING - UOM V KD MODEL
$
2,245.32
Qty:
Part #:CUTGHB3020
- MOLDED CASE, THERMAL MAGNETIC TYPE 3.8 INCH WIDTH X 6.6 INCH DEPTH X 4 INCH HEIGHT SIZE 480 VOLT MAX. AC VOLTAGE RATING 250 VOLT MAX. DC VOLTAGE RATING UL 489, CSA C22.2 APPROVAL 277/480 VOLT AC AT 50/60 HERTZ, 125/250 VOLT DC VOLTAGE RATING 14 KILOAMP AT 480 VOLT AC STAR/277 VOLT AC/125/250 VOLT DC INTERRUPTING RATING 20 AMP AT 40 DEG C CURRENT RATING 3 POLE(S) SCREW TYPE CLAMP LINE AND LOAD TERMINAL TYPE G FRAME TYPE CUTLER-HAMMER BRAND MOUNTING TYPE BOLT-ON APPLICATION PANELBOARD, SWITCHBOARD, MOTOR CONTROL CENTER APPLICABLE STANDARD NEMA AB1, AS 2184, BS 4752, IEC 157-1, SABS 156, SEV 157-1, VDE 0660 C, GHB MODEL
$
269.27
Qty:
Part #:CUTGHB3040
- MOLDED CASE THERMAL MAGNETIC TYPE 3 INCH W X 2.63 INCH D X 4 INCH H SIZE 480 MAX. AC VOLTAGE RATING 250 MAX. DC VOLTAGE RATING UL 489 CSA APPROVAL 277/480 VAC AT 50/60 HZ 125/250 VDC VOLTAGE RATING 14 KILOAMPERE AT 480 VAC STAR/277 VAC/125/250 VDC INTERRUPTING RATING 40 AMPERE AT 40 DEG C CURRENT RATING 3 POLE(S) ALUMINUM PRESSURE LINE AND LOAD TERMINAL TERMINAL TYPE GHB FRAME TYPE GHB MODEL
$
292.68
Qty:
Part #:CUTXTPAXCLKA2
- IEC CONTACTOR AND STARTER USED ON 3 PHASE(S) CUTLER-HAMMER BRAND FRAME SIZE B OVERALL DIMENSION 90 MILLIMETER LENGTH X 45 MILLIMETER WIDTH XTPA MODEL
$
27.20
Qty:
Part #:CUTXTPAXFA11
- AUXILIARY CONTACT TYPE MANUAL MOTOR PROTECTOR, MANUAL TRANSFORMER PROTECTOR USED ON 1NO-1NC CONTACT CONFIGURATION SCREW TERMINAL TYPE FRONT MOUNTING LOCATION CUTLER-HAMMER BRAND XTPA MODEL
$
23.94
Qty:
Part #:CUTXTCEXSBLR11
- AUXILIARY CONTACT TYPE CONTACTOR/STARTER USED ON 1NO EARLY MAKE-1NC LATE BREAK CONTACT CONFIGURATION 10 AMPERE CONTACT RATING SCREW TERMINAL TYPE SIDE MOUNTING LOCATION D TO R IEC SIZE EATON[R] BRAND NUMBER OF POLES 2 PACKAGING QUANTITY 1 XT MODEL
$
71.53
Qty:
Part #:CUTXTPR016BC1
- MANUAL MOTOR PROTECTOR, NON-REVERSING TYPE FRAME 45 MILLIMETER SIZE 16 AMP CURRENT RATING IP20 ENCLOSURE TYPE IEC CONSTRUCTION STANDARD BI-METALLIC AMBIENT TEMPERATURE COMPENSATED MANUAL RESET CLASS 10, 3-PHASE ADJUSTABLE FULL LOAD CURRENT RANGE 10 TO 16 AMP OVERLOADS 3 POLES 3 HP AT 200 VOLT AC, 5 HP AT 240 VOLT AC, 10 HP AT 480/600 VOLT AC 3 PHASE HP/VOLTS ON/OFF ROTARY HANDLE OPERATOR CUTLER-HAMMER BRAND APPROVAL UL, CSA, CE XTPR MODEL
$
212.84
Qty:
Part #:CUTXTCE018C01A
- FULL VOLTAGE, NON-REVERSING TYPE FRAME 45 MILLIMETER SIZE UL, CSA, CE APPROVAL PANEL/DIN RAIL MOUNTING IP00 ENCLOSURE 18 AMP (AC-3), 40 AMP (AC-1) CURRENT RATING 3 POLE(S) IEC CONSTRUCTION STANDARD 110 VOLT AC AT 50 HERTZ, 120 VOLT AC AT 60 HERTZ COIL VOLTAGE 1NC AUXILIARY CONTACT 2 HP AT 115 VOLT, 2 HP AT 200 VOLT, 3 HP AT 230 VOLT (1-PHASE UL/CSA RATING), 5 HP AT 200 VOLT/230 VOLT, 10 HP AT 460 VOLT, 15 HP AT 575 VOLT (3-PHASE UL/CSA RATING), 5 KILOWATT AT 220/230 VOLT, 7.5 KILOWATT AT 380/400 VOLT, 10 KILOWATT AT 415 VOLT, 11 KILOWATT AT 660/690 VOLT (3-PHASE 50/60 HERTZ IEC RATING) POWER RATING/VOLTAGE ROHS COMPLIANT TERMINAL TYPE SCREW OPERATING TEMPERATURE -25 TO 50 DEG C APPLICABLE STANDARD IEC/EN 60947-4-1
$
85.85
Qty:
Part #:KIDI9040E
- The Fire Sentry i9040 smoke alarm is a battery operated smoke alarm that utilizes ionization sensing technology. The four (4) inch unit is smaller in diameter giving it discreet design with the same quality you would expect in a Kidde manufactured product. The i9040 is powered by a 9V battery, providing continuous protection, even during power outages. This easy to install unit includes a test button to verify the detection electronics are working as intended.
Benefits
The Fire Sentry i9040 battery operated, single station smoke alarm provides an early warning signal to you and your family in the event of a fire hazard. The i9040 operates on a 9V battery power source that provided continuous protection even during a power outage, Installation is easy, no wiring required. This unit is UL Listed and includes a 3 year limited warranty.
This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Battery Operated (9V Battery Included) &ndash Easy installation and provides continuous protection even during power outages.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
Low Battery Indicator &ndash Low battery warning chirp alerts user to change battery.
Discreet Design &ndash Four (4) inch diameter.
Technical Specifications
Model Number
i9040
Power Source
9V Battery (included)
Audio Alarm
85dB at 10ft
Temperature Range
40F to 100F (4°C to 38°C)
Humidity Range
up to 85% relative humidity (RH)
Sensor
Ionization
Size
4&rdquo in diameter x 1.45&rdquo depth
Weight
.5lbs
Interconnects
No
Warranty
3 year limited
$
8.13
Qty:
Part #:KIDI9050
- The Kidde i9050 is a full size, ionization, battery operated smoke alarm designed to protect you and your family from the dangers of smoke and fire. The i9050 is powered by a 9V battery, providing continuous protection even during power outages. This unit includes a flashing red LED to indicate the alarm is receiving power. The i9050 is UL Listed and includes a 10 year limited warranty.
Benefits
The Kidde i9050 basic, battery operated smoke alarm provides you and your family an early warning signal against the dangers of fire and smoke. This easy to install smoke alarm includes a test button to verify the unit&rsquos electronic circuitry, horn and battery function are work properly. The i9050 also includes a tamper resist feature to help deter theft or tampering. This smoke alarm is powered by a 9V battery and is suitable for all living areas. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation &ndash No wiring required.
Battery Operated (9V battery included) &ndash Provides continuous protection even during power failures.
Quality Design &ndash 10 year limited warranty.
Flashing LED &ndash Indicates alarm is receiving power.
Test Button &ndash Verifies battery and alarm operation.
Low Battery Indicator &ndash Chirps when battery needs replacement.
Technical Specifications
Model
i9050
Power Source
9V Battery (included)
Audio Alarm
85dB at 10ft
Temperature Range
40F to 100F (4C to 38C)
Humidity Range
up to 85% relative humidity (RH)
Sensor
Ionization
Size
5&rdquo in diameter x 1.75&rdquo depth
Weight
.62lbs
Interconnects
No
LED
Red, normal operation
Warranty
10 year limited warranty
$
9.22
PK
Qty:
Part #:KIDHD135F
-
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke.
The Kidde HD135F 120VAC wire in heat alarm gives you and your family an early warning to dangerous temperatures of 135F or more
This unit also includes a tamper resist pin that helps to deter thief and tampering.
This unit can be used as a single station unit or it can be interconnected to up to 24 Kidde devices in a multiple station arrangement
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke. The alarm will sound if temperatures rise above 135F. The Kidde HD135F is interconnectable. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices (Smoke, heat, CO, etc) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. This unit includes a 5-year limited warranty and is UL Listed.
Interconnectable &ndash Interconnects with up to 24 Kidde devices of which 18 can be initiating.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
9V Battery Back Up &ndash Provides continuous protection even during power outages.
Red LED &ndash Flashes every 30-40 seconds to indicate proper operation.
Low Battery Indicator &ndash Alerts user in the event of alow or missing battery.
Quick Connect Power Harness &ndash Makes installation fast and easy.
Technical Specifications
Model
HD135F
UPC Number
0-25417-84135-0
Power Source
120VAC, 60HZ, 9V battery backup
Sensor
Heat
Audio Alarm
85dB at 10ft
Temperature Range
-20F to +100F (-29C and +38C)
Humidity Range
5%-95% relative humidity (RH)
Size
5&rdquo in diameter x 2&rdquo depth
Weight
.75lbs
Interconnects
Up to 24 Kidde devices of which 18 can be initiating devices.
LED
Green, AC power present, alarm mode flashing Red indicates originating unit
Warranty
5 year limited warranty
$
34.89
Qty:
Part #:KIDSM120X
- 60 HZ FREQUENCY RATING 120 VAC VOLTAGE RATING
$
8.54
Qty:
Part #:KIDKN-COSM-BA
- Description
The Kidde KN-COSM-BA Combination Carbon Monoxide & Smoke Alarm provides two important safety devices in a single unit. This alarm includes a voice warning system that announces &ldquoFire, Carbon Monoxide, Low Battery and Smart HushTM Activation.&rdquo The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This technologically advanced combination alarm is battery operated protecting you and your family even during a power outage when many incidences occur.
The KN-COSM-BA is an easy to install alarm that is suitable for all living areas and has a 10-year life and a 5-year limited warranty. This alarm uses ionization sensing technology. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms.
Alarm Warnings
Fire
The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message &ldquoFIRE!&rdquo. The alarm pattern will repeat until smoke is eliminated.
Carbon Monoxide
Four short alarm beeps followed by a verbal warning &ldquoWARNING! CARBON MONOXIDE!&rdquo This continues until the unit is reset or the CO is eliminated.
Low Battery
If any form of battery failure is detected the red LED light will flash and the unit will &ldquochirp&rdquo once every 60 seconds for at least 7 days. The &ldquoLOW BATTERY&rdquo voice occurs once every 15 minutes. The green LED will also be flashing twice per second.
Voice Hush Indication
&ldquoHUSH MODE ACTIVATED&rdquo and &ldquoHUSH MODE CANCELLED&rdquo voice announcement.
Peak Level Memory
If the alarm had detected a CO level of 100ppm or higher, the unit will announce &ldquoCARBON MONOXIDE PREVIOUSLY DETECTED&rdquo to warn of the CO incident, when the Test/ Reset button is pressed.
Voice Alarm &ndashAnnounces the hazard type detected thereby helping to speed up the correct reaction to the hazard detected. Alarm announces &ldquoFire!&rdquo when a smoke or fire hazard is detected and announces &ldquoWarning Carbon Monoxide&rdquo when a CO hazard is detected.
Combined Carbon Monoxide and Smoke Alarm &ndash A single unit can be installed where previously, two were needed. Reduces installation time and helps to keep home décor attractive.
Test/Reset Button &ndash Tests alarm circuitry and triggers the voice announcement.
LEDs &ndash Flashing green for normal operation and flashing red for alarm condition.
Low Battery Warning &ndash The unit warns of a low battery condition by announcing &ldquolow battery&rdquo and by initiating an alarm chirp and activating a flashing red LED.
Battery Powered &ndash Provides protection even during power outages when many fire and carbon monoxide incidents occur.
Battery Safeguard &ndash The battery door will not close unless the batteries are properly installed.
Hush® Feature &ndash Temporarily silences nuisance alarms.
Ionization Smoke Alarm Sensor
Technical Specifications
Model
KN-COSM-BA
Power Source
2 AA Battery
Sensor
Smoke Ionization, CO Electrochemical
Audio Alarm
85dB at 10ft
Temperature Range
40F (4.4C) to 100F (37.8C)
Humidity Range
10%-95% relative humidity non-condensing
Size
5.6&rdquo in diameter x 1.8&rdquo depth
Weight
13oz
Interconnects
No
$
50.49
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:KIDP3010K-CO
- The Kidde P3010K-CO is a 10-year, sealed battery, smoke and carbon monoxide alarm that features photoelectric and electrochemical sensing technology with Smart Hush feature. This combination alarm combines the detection capabilities of a photoelectric sensor with that of an electrochemical sensor, which is used to detect CO. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one.
This constant communication enhances the alarm&rsquos overall performance and significantly reduces the potential for a nuisance alarm. The sealed in lithium battery will power the unit for the entirety of its 10 year life, eliminating the need for battery replacement and worry about unauthorized battery removal. The alarm provides continuous protection from smoke and carbon monoxide, even during power outages. The alarm will automatically activate when it is attached to the mounting bracket there are no pull-tabs, no switches, everything is automatic. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the chirp and making it safe for disposal. Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms.
Kidde Worry-Free Kitchen Smoke & Carbon Monoxide Alarm
Part Number(Ordering Number)21009667
Combination Smoke and Carbon Monoxide Alarm &ndash Smoke and CO sensing technologies work together to detect real fires faster and reduce cooking-related nuisance alarms.
Sealed-In Lithium Battery &ndash Sealed-in lithium power supply no battery replacement required over the 10 year life of the alarm. Eliminates worry about battery removal or unauthorized deactivation of alarm.
Photoelectric Sensor &ndash Smoke alarm contains advanced photoelectric sensor that may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
Self Activation &ndash Alarm automatically activates when attached to the mounting bracket.
Alarm Memory &ndash Rapidly flashing LED alerts user if the alarm has sounded since the last time the test/reset button was used.
Test/Hush Button &ndash Tests alarm circuitry and activates Hush features.
Smart HushTM &ndash Temporarily silences nuisance alarms for approximately 10 minutes and will not allow hush mode unless the unit is in alarm mode.
LED &ndash Red LED will blink in conjunction with the alarm sound.
End of Life Warning &ndash Alarm chirps every 30 seconds to indicate the unit is in need of replacement.
End of Life Hush® &ndash End of life indication can be silenced three days at a time up to 30 days to allow for alarm replacement at a more convenient time.
UL217 and UL2034 Listed
10 Year Limited Warranty
Technical Specifications
Model
P3010K-CO
Power Source
Sealed Lithium Battery
Sensor
SmokePhotoelectric
CO
Electrochemical
Audio Alarm
85dB at 10ft
Temperature Range
40F (4.4C) to 100F (37.8C)
Humidity Range
10%-95% non-condensing relative humidity (RH)
Size
5.22&rdquo in diameter x 1.6&rdquo depth
Weight
1 lb.
Interconnects
No
Warranty
10 year limited
$
45.45
Qty:
Part #:KIDI12010S
- The Kidde i12010S is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with sealed-in lithium battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home.
The i12010S contains a 10-year tamper proof battery that eliminates the need for battery replacement, and ends worry over unauthorized battery removal. The alarm provides continuous protection from smoke and fire, even during power outages. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the chirp and making it safe for disposal. The end of life signal can be temporarily silenced to allow for replacement at a more convenient time.
Easy Installation
Battery backup automatically activates when the alarm is attached to mounting bracket.
Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
10-year sealed battery substitutes need for routine 9V replacement.
Large centrally located Test/Hush® alarm control button silences nuisance alarms for approximately 9 minutes.
Dust cover protects sensor from contaminates during construction, reducing nuisance alarms.
User-Friendly Features
Red LED indicates alarm mode, Green LED indicates AC power is present.
Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user guide for complete instructions.
End of Life Hush feature allows user to temporarily silence end of life chirp 3 days at a time for a maximum of 30 day life extension.
Technical Specifications
Model
i12010S
Power Source
120VAC (60 Hz, 45mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40F (4.4C) to 100F (37.8C)
Humidity Range
Up to 95% relative humidity (RH), non-condensing
Size
5.5&rdquo in diameter x 1.75&rdquo depth
Weight
.45lbs
Interconnects
Up to 24 Kidde devices
Warranty
10 year limited
$
25.86
Qty:
Displaying: 1 - 24 of 734 Matching Items