Ipex USA
EATON CORPORATION
View:
Active Filters :
- Mfr / Trade Name: EATON CORPORATION Ipex USA KIDDE SATCO
$
2.54
Qty:
Qty:
Part #:CUTBW2100
- THERMAL MAGNETIC TYPE ECB UNIT ENCLOSURE USED ON 2 AWG TO 300 KCMIL (ALUMINUM/COPPER) WIRE SIZE UL 489, CSA APPROVAL 120/240 VAC VOLTAGE RATING 10 KILOAMPERE INTERRUPTING RATING 100 AMPERE CURRENT RATING 2 POLE(S) LINE TERMINAL TERMINAL TYPE BW MODEL
$
119.55
Qty:
Part #:CUTEDB2150
- THERMAL MAGNETIC, MOLDED CASE TYPE 2.75 INCH W X 3.38 INCH D X 6 INCH H SIZE 240 MAX. AC VOLTAGE RATING 125 MAX. DC VOLTAGE RATING 240 VAC AT 50/60 HZ, 125 VDC (UL) 220/240 VAC AT 50/60 HZ, 125 VDC (IEC) VOLTAGE RATING 22 KILOAMPERE AT 240 VAC, 10 KILOAMPERE AT 125 VDC (UL) 22 KILOAMPERE AT 220/240 VAC, 10 KILOAMPERE AT 125 VDC (IEC) INTERRUPTING RATING 150 AMPERE CURRENT RATING 2 POLE(S) STANDARD PRESSURE LINE TERMINAL, STANDARD PRESSURE LOAD TERMINAL TERMINAL TYPE F FRAME TYPE CUTLER-HAMMER[R] BRAND MAXIMUM AC VOLTAGE RATING - UOM V MAXIMUM DC VOLTAGE RATING - UOM V EDB MODEL
$
510.48
Qty:
Part #:CUTBW2150
- THERMAL MAGNETIC MAIN TYPE LOAD CENTER USED ON 2 AWG TO 300 KCMIL (ALUMINUM/COPPER) WIRE SIZE UL 489 APPROVAL 208 VAC STAR/120 VAC 240 VAC VOLTAGE RATING 10 KILOAMPERE INTERRUPTING RATING 150 AMPERE CURRENT RATING 2 POLE(S)
$
105.76
Qty:
Part #:CUTBW2200
- THERMAL MAGNETIC MAIN TYPE LOAD CENTER USED ON 2 AWG TO 300 KCMIL (ALUMINUM/COPPER) WIRE SIZE UL 489 APPROVAL 208 VAC STAR/120 VAC 240 VAC VOLTAGE RATING 10 KILOAMPERE INTERRUPTING RATING 200 AMPERE CURRENT RATING 2 POLE(S)
$
119.55
Qty:
Part #:CUTKD3400
- MOLDED CASE THERMAL MAGNETIC TYPE 5.5 INCH W X 4.063 INCH D X 10.125 INCH H SIZE 600 MAX. AC VOLTAGE RATING 600 VAC AT 50/60 HZ VOLTAGE RATING 65 KILOAMPERE AT 240 VAC 35 KILOAMPERE AT 480 VAC 25 KILOAMPERE AT 600 VAC 10 KILOAMPERE AT 250 VDC (NEMA/UL/CSA) 65 KILOAMPERE AT 240 VAC 40 KILOAMPERE AT 380/415 VAC 10 KILOAMPERE AT 250 VDC (IEC) INTERRUPTING RATING 400 AMPERE AT 40 DEG C CURRENT RATING 3 POLE(S) ALUMINUM/COPPER STANDARD PRESSURE LINE TERMINAL STANDARD PRESSURE LOAD TERMINAL TERMINAL TYPE KD FRAME TYPE APPLICABLE STANDARD IEC 157-1 MAXIMUM AC VOLTAGE RATING - UOM V KD MODEL
$
2,245.32
Qty:
Part #:CUTGHB3020
- MOLDED CASE, THERMAL MAGNETIC TYPE 3.8 INCH WIDTH X 6.6 INCH DEPTH X 4 INCH HEIGHT SIZE 480 VOLT MAX. AC VOLTAGE RATING 250 VOLT MAX. DC VOLTAGE RATING UL 489, CSA C22.2 APPROVAL 277/480 VOLT AC AT 50/60 HERTZ, 125/250 VOLT DC VOLTAGE RATING 14 KILOAMP AT 480 VOLT AC STAR/277 VOLT AC/125/250 VOLT DC INTERRUPTING RATING 20 AMP AT 40 DEG C CURRENT RATING 3 POLE(S) SCREW TYPE CLAMP LINE AND LOAD TERMINAL TYPE G FRAME TYPE CUTLER-HAMMER BRAND MOUNTING TYPE BOLT-ON APPLICATION PANELBOARD, SWITCHBOARD, MOTOR CONTROL CENTER APPLICABLE STANDARD NEMA AB1, AS 2184, BS 4752, IEC 157-1, SABS 156, SEV 157-1, VDE 0660 C, GHB MODEL
$
269.27
Qty:
Part #:CUTGHB3040
- MOLDED CASE THERMAL MAGNETIC TYPE 3 INCH W X 2.63 INCH D X 4 INCH H SIZE 480 MAX. AC VOLTAGE RATING 250 MAX. DC VOLTAGE RATING UL 489 CSA APPROVAL 277/480 VAC AT 50/60 HZ 125/250 VDC VOLTAGE RATING 14 KILOAMPERE AT 480 VAC STAR/277 VAC/125/250 VDC INTERRUPTING RATING 40 AMPERE AT 40 DEG C CURRENT RATING 3 POLE(S) ALUMINUM PRESSURE LINE AND LOAD TERMINAL TERMINAL TYPE GHB FRAME TYPE GHB MODEL
$
292.68
Qty:
Part #:CUTXTPAXCLKA2
- IEC CONTACTOR AND STARTER USED ON 3 PHASE(S) CUTLER-HAMMER BRAND FRAME SIZE B OVERALL DIMENSION 90 MILLIMETER LENGTH X 45 MILLIMETER WIDTH XTPA MODEL
$
27.20
Qty:
Part #:CUTXTPAXFA11
- AUXILIARY CONTACT TYPE MANUAL MOTOR PROTECTOR, MANUAL TRANSFORMER PROTECTOR USED ON 1NO-1NC CONTACT CONFIGURATION SCREW TERMINAL TYPE FRONT MOUNTING LOCATION CUTLER-HAMMER BRAND XTPA MODEL
$
23.94
Qty:
Part #:CUTXTCEXSBLR11
- AUXILIARY CONTACT TYPE CONTACTOR/STARTER USED ON 1NO EARLY MAKE-1NC LATE BREAK CONTACT CONFIGURATION 10 AMPERE CONTACT RATING SCREW TERMINAL TYPE SIDE MOUNTING LOCATION D TO R IEC SIZE EATON[R] BRAND NUMBER OF POLES 2 PACKAGING QUANTITY 1 XT MODEL
$
71.53
Qty:
Part #:CUTXTPR016BC1
- MANUAL MOTOR PROTECTOR, NON-REVERSING TYPE FRAME 45 MILLIMETER SIZE 16 AMP CURRENT RATING IP20 ENCLOSURE TYPE IEC CONSTRUCTION STANDARD BI-METALLIC AMBIENT TEMPERATURE COMPENSATED MANUAL RESET CLASS 10, 3-PHASE ADJUSTABLE FULL LOAD CURRENT RANGE 10 TO 16 AMP OVERLOADS 3 POLES 3 HP AT 200 VOLT AC, 5 HP AT 240 VOLT AC, 10 HP AT 480/600 VOLT AC 3 PHASE HP/VOLTS ON/OFF ROTARY HANDLE OPERATOR CUTLER-HAMMER BRAND APPROVAL UL, CSA, CE XTPR MODEL
$
212.84
Qty:
Part #:CUTXTCE018C01A
- FULL VOLTAGE, NON-REVERSING TYPE FRAME 45 MILLIMETER SIZE UL, CSA, CE APPROVAL PANEL/DIN RAIL MOUNTING IP00 ENCLOSURE 18 AMP (AC-3), 40 AMP (AC-1) CURRENT RATING 3 POLE(S) IEC CONSTRUCTION STANDARD 110 VOLT AC AT 50 HERTZ, 120 VOLT AC AT 60 HERTZ COIL VOLTAGE 1NC AUXILIARY CONTACT 2 HP AT 115 VOLT, 2 HP AT 200 VOLT, 3 HP AT 230 VOLT (1-PHASE UL/CSA RATING), 5 HP AT 200 VOLT/230 VOLT, 10 HP AT 460 VOLT, 15 HP AT 575 VOLT (3-PHASE UL/CSA RATING), 5 KILOWATT AT 220/230 VOLT, 7.5 KILOWATT AT 380/400 VOLT, 10 KILOWATT AT 415 VOLT, 11 KILOWATT AT 660/690 VOLT (3-PHASE 50/60 HERTZ IEC RATING) POWER RATING/VOLTAGE ROHS COMPLIANT TERMINAL TYPE SCREW OPERATING TEMPERATURE -25 TO 50 DEG C APPLICABLE STANDARD IEC/EN 60947-4-1
$
85.85
Qty:
Part #:KIDI9040E
- The Fire Sentry i9040 smoke alarm is a battery operated smoke alarm that utilizes ionization sensing technology. The four (4) inch unit is smaller in diameter giving it discreet design with the same quality you would expect in a Kidde manufactured product. The i9040 is powered by a 9V battery, providing continuous protection, even during power outages. This easy to install unit includes a test button to verify the detection electronics are working as intended.
Benefits
The Fire Sentry i9040 battery operated, single station smoke alarm provides an early warning signal to you and your family in the event of a fire hazard. The i9040 operates on a 9V battery power source that provided continuous protection even during a power outage, Installation is easy, no wiring required. This unit is UL Listed and includes a 3 year limited warranty.
This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Battery Operated (9V Battery Included) &ndash Easy installation and provides continuous protection even during power outages.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
Low Battery Indicator &ndash Low battery warning chirp alerts user to change battery.
Discreet Design &ndash Four (4) inch diameter.
Technical Specifications
Model Number
i9040
Power Source
9V Battery (included)
Audio Alarm
85dB at 10ft
Temperature Range
40F to 100F (4°C to 38°C)
Humidity Range
up to 85% relative humidity (RH)
Sensor
Ionization
Size
4&rdquo in diameter x 1.45&rdquo depth
Weight
.5lbs
Interconnects
No
Warranty
3 year limited
$
8.13
Qty:
Part #:KIDI9050
- The Kidde i9050 is a full size, ionization, battery operated smoke alarm designed to protect you and your family from the dangers of smoke and fire. The i9050 is powered by a 9V battery, providing continuous protection even during power outages. This unit includes a flashing red LED to indicate the alarm is receiving power. The i9050 is UL Listed and includes a 10 year limited warranty.
Benefits
The Kidde i9050 basic, battery operated smoke alarm provides you and your family an early warning signal against the dangers of fire and smoke. This easy to install smoke alarm includes a test button to verify the unit&rsquos electronic circuitry, horn and battery function are work properly. The i9050 also includes a tamper resist feature to help deter theft or tampering. This smoke alarm is powered by a 9V battery and is suitable for all living areas. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation &ndash No wiring required.
Battery Operated (9V battery included) &ndash Provides continuous protection even during power failures.
Quality Design &ndash 10 year limited warranty.
Flashing LED &ndash Indicates alarm is receiving power.
Test Button &ndash Verifies battery and alarm operation.
Low Battery Indicator &ndash Chirps when battery needs replacement.
Technical Specifications
Model
i9050
Power Source
9V Battery (included)
Audio Alarm
85dB at 10ft
Temperature Range
40F to 100F (4C to 38C)
Humidity Range
up to 85% relative humidity (RH)
Sensor
Ionization
Size
5&rdquo in diameter x 1.75&rdquo depth
Weight
.62lbs
Interconnects
No
LED
Red, normal operation
Warranty
10 year limited warranty
$
9.22
PK
Qty:
Part #:KIDHD135F
-
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke.
The Kidde HD135F 120VAC wire in heat alarm gives you and your family an early warning to dangerous temperatures of 135F or more
This unit also includes a tamper resist pin that helps to deter thief and tampering.
This unit can be used as a single station unit or it can be interconnected to up to 24 Kidde devices in a multiple station arrangement
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke. The alarm will sound if temperatures rise above 135F. The Kidde HD135F is interconnectable. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices (Smoke, heat, CO, etc) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. This unit includes a 5-year limited warranty and is UL Listed.
Interconnectable &ndash Interconnects with up to 24 Kidde devices of which 18 can be initiating.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
9V Battery Back Up &ndash Provides continuous protection even during power outages.
Red LED &ndash Flashes every 30-40 seconds to indicate proper operation.
Low Battery Indicator &ndash Alerts user in the event of alow or missing battery.
Quick Connect Power Harness &ndash Makes installation fast and easy.
Technical Specifications
Model
HD135F
UPC Number
0-25417-84135-0
Power Source
120VAC, 60HZ, 9V battery backup
Sensor
Heat
Audio Alarm
85dB at 10ft
Temperature Range
-20F to +100F (-29C and +38C)
Humidity Range
5%-95% relative humidity (RH)
Size
5&rdquo in diameter x 2&rdquo depth
Weight
.75lbs
Interconnects
Up to 24 Kidde devices of which 18 can be initiating devices.
LED
Green, AC power present, alarm mode flashing Red indicates originating unit
Warranty
5 year limited warranty
$
34.89
Qty:
$
64.43
Qty:
Part #:SATS9448
- 5-3/16 INCH UL, UL (CANADA AND US), ETL APPROVAL DOWN/TRACK LIGHTING, WET LOCATION APPLICATION 120 VOLT VOLTAGE RATING 4-3/4 INCH DIAMETER 15 WATT WATTAGE LED LAMP E26 MEDIUM BASE TYPE 25000 LIFE IN HOUR PAR38 SHAPE DESIGNATION 1200 LUMEN INTENSITY 4000 80 COLOR RENDERING INDEX SILVER GLASS FINISH COOL WHITE GLASS COLOR 40 DEGREE BEAM SPREAD ANGLE SATCO BRAND ROHS COMPLIANT ENCLOSURE RATING IP65
$
10.43
Qty:
Part #:SATS9480
- PARABOLIC REFLECTOR, DIMMABLE TYPE 5-3/16 INCH UL (CANADA AND US), ETL APPROVAL INDOOR/OUTDOOR LIGHTING, DOWN LIGHTING, TRACK LIGHTING, WET LOCATION APPLICATION 4-3/4 INCH DIAMETER LED LAMP E26 MEDIUM BASE TYPE 25000 LIFE IN HOUR PAR38 SHAPE DESIGNATION SILVER GLASS FINISH RED GLASS COLOR SEALED BEAM SHAPE DESCRIPTION ROHS COMPLIANT ENCLOSURE TYPE IP65 BEAM SPREAD ANGLE (DEG) 40 VOLTAGE RATING (V) 120 WATTAGE (W) 15
$
15.77
Qty:
Part #:SATS9481
- PARABOLIC REFLECTOR, DIMMABLE TYPE 5-3/16 INCH UL (CANADA AND US), ETL APPROVAL INDOOR/OUTDOOR LIGHTING, DOWN LIGHTING, TRACK LIGHTING, WET LOCATION APPLICATION 4-3/4 INCH DIAMETER LED LAMP E26 MEDIUM BASE TYPE 25000 LIFE IN HOUR PAR38 SHAPE DESIGNATION SILVER GLASS FINISH GREEN GLASS COLOR SEALED BEAM SHAPE DESCRIPTION ROHS COMPLIANT ENCLOSURE TYPE IP65 BEAM SPREAD ANGLE (DEG) 40 VOLTAGE RATING (V) 120 WATTAGE (W) 15
$
15.77
Qty:
12 WATT DOWNLIGHT RETROFIT LED 5IN -6IN TRIM 2700K MEDIUM BASE 120 VOLTS 110 DEG. BEAM SPREAD 2-PACK
- 7-1/2 INCH DIA X 6-3/8 INCH H SIZE WHITE/WARM WHITE FINISH LED DOWNLIGHT HOUSING USED ON UL, ETL, UL (CANADA AND US) APPROVAL DAMP LOCATION APPLICATION 12 W LED LAMP TYPE 5 OR 6 INCH NOMINAL APERTURE SIZE ROUND APERTURE SHAPE ROHS COMPLIANT VOLTAGE RATING 120 V ADJUSTABLE LENGTH 4-1/2 TO 6-5/16 INCH INTENSITY 800 LUMEN COLOR TEMPERATURE 2700 K COLOR RENDERING INDEX 80 RATED LIFE IN HOUR 25000 BEAM SPREAD ANGLE 110 DEGREE
$
21.75
Qty:
$
4.90
Qty:
Displaying: 1 - 24 of 772 Matching Items