LITHONIA
EATON CORPORATION
View:
Active Filters :
- Mfr / Trade Name: EATON CORPORATION LITHONIA MULBERRY METAL PRODUCTS RAB Rack-A-Tiers
Part #:CUTXTPR016BC1
- MANUAL MOTOR PROTECTOR, NON-REVERSING TYPE FRAME 45 MILLIMETER SIZE 16 AMP CURRENT RATING IP20 ENCLOSURE TYPE IEC CONSTRUCTION STANDARD BI-METALLIC AMBIENT TEMPERATURE COMPENSATED MANUAL RESET CLASS 10, 3-PHASE ADJUSTABLE FULL LOAD CURRENT RANGE 10 TO 16 AMP OVERLOADS 3 POLES 3 HP AT 200 VOLT AC, 5 HP AT 240 VOLT AC, 10 HP AT 480/600 VOLT AC 3 PHASE HP/VOLTS ON/OFF ROTARY HANDLE OPERATOR CUTLER-HAMMER BRAND APPROVAL UL, CSA, CE XTPR MODEL
$
212.84
Qty:
Part #:CUTXTCE018C01A
- FULL VOLTAGE, NON-REVERSING TYPE FRAME 45 MILLIMETER SIZE UL, CSA, CE APPROVAL PANEL/DIN RAIL MOUNTING IP00 ENCLOSURE 18 AMP (AC-3), 40 AMP (AC-1) CURRENT RATING 3 POLE(S) IEC CONSTRUCTION STANDARD 110 VOLT AC AT 50 HERTZ, 120 VOLT AC AT 60 HERTZ COIL VOLTAGE 1NC AUXILIARY CONTACT 2 HP AT 115 VOLT, 2 HP AT 200 VOLT, 3 HP AT 230 VOLT (1-PHASE UL/CSA RATING), 5 HP AT 200 VOLT/230 VOLT, 10 HP AT 460 VOLT, 15 HP AT 575 VOLT (3-PHASE UL/CSA RATING), 5 KILOWATT AT 220/230 VOLT, 7.5 KILOWATT AT 380/400 VOLT, 10 KILOWATT AT 415 VOLT, 11 KILOWATT AT 660/690 VOLT (3-PHASE 50/60 HERTZ IEC RATING) POWER RATING/VOLTAGE ROHS COMPLIANT TERMINAL TYPE SCREW OPERATING TEMPERATURE -25 TO 50 DEG C APPLICABLE STANDARD IEC/EN 60947-4-1
$
85.85
Qty:
Part #:RABPS4-11-20D2
- SQUARE STRAIGHT TYPE 20 FT NOMINAL MOUNTING HEIGH UL (CANADA AND US), CSA APPROVAL WET LOCATION APPLICATION 3/4 INCH DIA X 17 INCH L X 3 INCH THD BOLT SIZE STEEL SHAFT MATERIAL 8-1/2 INCH BOLT CIRCLE DIAMETER 2 FIXTURE(S) DRILL FIXTURE MOUNTING TYPE 3 INCH W X 5 INCH H HAND HOLE TYPE 240 LB AT 70 MPH, 165 LB AT 80 MPH, 75 LB AT 100 MPH, 110 LB AT 90 MPH, 45 LB AT 110 MPH, 20 LB AT 120 MPH ARM CAPACITY 8.3 SQ FT AT 70 MPH, 5.6 SQ FT AT 80 MPH, 3.6 SQ FT AT 90 MPH, 2.2 SQ FT AT 100 MPH, 1 SQ FT AT 110 MPH, 0.2 SQ FT AT 120 MPH EFFECTIVE PROJECTED AREA SQUARE BASE SHAFT MOUNTING TYPE 4 INCH SHAFT BOTTOM SIZE BRONZE SHAFT COLOR POLYESTER POWDER COATED SHAFT FINISH 4 INCH SHAFT TOP SIZE 1/8 INCH SHAFT WALL THICKNESS 70/80/90/100/110/120 MPH WIND LOAD RATING 8 INCH L X 8 INCH W X 3/4 INCH THK MOUNTING BASE SIZE INCLUDES GALVANIZED ANCHOR BOLT, GALVANIZED HARDWARE, ANCHOR BOLT TEMPLATE PS4 MODEL
$
895.67
Qty:
Part #:RABFFLED39W
- 11 INCH W X 7-1/2 INCH D X 10 INCH H SIZE CHIP AND FADE RESISTANT WHITE POLYESTER POWDER COATED FINISH UL, UL (CANADA AND US) APPROVAL 1/2 INCH THREADED ARM, O-RING, STAINLESS STEEL SCREW MOUNTING IP65 ENCLOSURE LED LAMP TYPE (1) 13 W, (1) 26 W LAMP WATTAGE PRECISION DIE-CAST ALUMINUM HOUSING MATERIAL 100 TO 277 VAC AT 50/60 HZ LAMP/BALLAST VOLTAGE NEMA 7 X 6 DISTRIBUTION/BEAM SPREAD 0.65 SQ FT EPA LFLOOD[R] BRAND APPLICATION WET LOCATION INITIAL INTENSITY 4596 LUMEN COLOR RENDERING INDEX 65 COLOR TEMPERATURE IN KELVIN 5000 (COOL) DRIVER INPUT WATTAGE 41 W REFLECTOR ANODIZED SEMI SPECULAR ALUMINUM WITH BUTTON PHOTOCELL WIRED FOR 120 V FFLED MODEL
$
250.16
Qty:
Part #:RABLFLED5YW
*LIMITED SUPPLY*
- 2-3/8 INCH DIA X 6 INCH L SIZE CHIP AND FADE RESISTANT WHITE POLYESTER POWDER COATED FINISH UL, UL (CANADA AND US) APPROVAL ARM MOUNTING LED LAMP TYPE 5 W LAMP WATTAGE PRECISION DIE-CAST ALUMINUM HOUSING MATERIAL 100 TO 240 VAC AT 50/60 HZ LAMP/BALLAST VOLTAGE NEMA 4 X 4, 44 DEGREE DISTRIBUTION/BEAM SPREAD LFLOOD[R] BRAND ROHS COMPLIANT APPLICATION WET LOCATION INITIAL INTENSITY 208 LUMEN COLOR RENDERING INDEX 86 COLOR TEMPERATURE IN KELVIN 3000 (WARM) DRIVER INPUT WATTAGE 5 W LENS MATERIAL MICROPRISMATIC DIFFUSION LFLED MODEL
Sold Out
$
476.02
Qty:
$
192.92
Qty:
Part #:RABALED4T150
- BRONZE POLYESTER POWDER COATED FINISH UL APPROVAL ARM MOUNTING LED LAMP TYPE 150 W LAMP WATTAGE DIE-CAST ALUMINUM HOUSING MATERIAL 120/208/240/277 V AT 50/60 HZ LAMP/BALLAST VOLTAGE TYPE 4 DISTRIBUTION/BEAM SPREAD SIZE 23.4 INCH L X 15 INCH W X 4.5 INCH H INITIAL INTENSITY 14349 LUMEN COLOR RENDERING INDEX 65 COLOR TEMPERATURE IN KELVIN 5000 (COOL) EFFECTIVE PROJECTED AREA 0.75 SQ FT ALED MODEL
$
880.02
Qty:
$
927.16
Qty:
$
190.80
Qty:
$
380.11
Qty:
Part #:RABHNLED26A
- 5-1/2 INCH DIA X 9-1/4 INCH D SIZE BRONZE POLYESTER POWDER COATED FINISH UL APPROVAL ARM, O-RING, STAINLESS STEEL SCREW MOUNTING LED LAMP TYPE 26 W LAMP WATTAGE DIE-CAST ALUMINUM HOUSING MATERIAL 120/208/240/277 V AT 50/60 HZ LAMP/BALLAST VOLTAGE NEMA 2 X 2 HORIZONTAL/VERTICAL DISTRIBUTION/BEAM SPREAD ROHS COMPLIANT DRIVER INPUT POWER 27 W LAMP INTENSITY 2272 LUMEN COLOR RENDERING INDEX 67 COLOR TEMPERATURE 5000 K LAMP LIFE 100000 HR GASKET MATERIAL HIGH TEMPERATURE SILICONE REFLECTOR MATERIAL SEMI-SPECULAR VACUUM-METALIZED POLYCARBONATE AMBIEN
$
379.98
Qty:
$
345.00
Qty:
$
95.63
Qty:
Part #:CUTC25END430B
- STANDARD, NON-REVERSING TYPE FRAME E SIZE UL, CSA, CE APPROVAL OPEN ENCLOSURE 30 AMPERE CURRENT RATING 4 POLE(S) 208 TO 240 VAC AT 50/60 HZ COIL VOLTAGE 2 HP AT 115 V 1 PHASE, 5 HP AT 230 V 1 PHASE, 10 HP AT 230 V 3 PHASE, 15 HP AT 460/575 V 3 PHASE POWER RATING/VOLTAGE 30 AMPERE INDUCTIVE AMPERE 40 AMPERE RESISTIVE AMPERE APPLICABLE STANDARD IEC/EN 60947-4-1 OVERALL DIMENSION 2.68 INCH W X 3.38 INCH D X 3.75 INCH H LOCKED ROTOR RATING 180 AMPERE AT 115/230 VAC, 150 AMPERE AT 460 VAC, 120 AMPERE AT 575 VAC INCLUDES SCREW/PRESSURE PLATE AND QUICK CONNECT TERMINAL APPLICATION ELEVATORS, POOLS, FOOD PROCESSING, PUMPS/COMPRESSORS, LIGHTING, HOISTS AND CRANES, BATTERY CHARGERS, PRINTING PRESSES, VENDING MACHINES AND AGRICULTURE C25END MODEL
$
103.57
Qty:
Part #:CUTMSH5-0A
- MANUAL STARTER USED ON UL CSA APPROVAL PLUG IN MOUNTING 4 TO 4.39 AMPERE MOTOR FLA STANDARD TRIP TYPE MSH MODEL
Qty:
Part #:APS-8NS232
- NARROW STRIP TYPE 2-3/4 INCH 3-5/16 INCH 96 INCH LAMP LENGTH 8 FOOT NOMINAL LENGTH ELECTRONIC BALLAST TYPE 4 LAMP(S) T8 LAMP TYPE COOPER LIGHTING BRAND POWER RATING 32 WATT CHANNEL MATERIAL DIE FORMED COLD ROLLED STEEL APPLICATION DAMP LOCATION, INDUSTRIAL, COMMERCIAL, RETAIL, RESIDENTIAL APPROVAL UL, CUL APS-NS MODEL
$
51.43
Qty:
Part #:CUTTP432
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 3/4 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
8.09
Qty:
Part #:CUTTP451
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.75
Qty:
Part #:CLB212
- POWDER COATED DIE CAST ALUMINUM, NEOPRENE GASKET MATERIAL 2 1/2 INCH HUB SIZE THREADED INSTALLATION LB CONFIGURATION 2 HUB(S) UL APPROVAL STEEL COVER TYPE 90 DEG HUB LOCATION BACK ACCESS OPENING
$
44.43
Qty:
$
5.20
Qty:
$
11.52
PK
Qty:
$
16.46
PK
Qty:
Displaying: 25 - 48 of 648 Matching Items