MADISON EQUIPMENT CO.
EATON CORPORATION
View:
Active Filters :
- Mfr / Trade Name: EATON CORPORATION MADISON EQUIPMENT CO. RAB Siemens
Part #:CUTXTCEXSBLR11
- AUXILIARY CONTACT TYPE CONTACTOR/STARTER USED ON 1NO EARLY MAKE-1NC LATE BREAK CONTACT CONFIGURATION 10 AMPERE CONTACT RATING SCREW TERMINAL TYPE SIDE MOUNTING LOCATION D TO R IEC SIZE EATON[R] BRAND NUMBER OF POLES 2 PACKAGING QUANTITY 1 XT MODEL
$
71.53
Qty:
Part #:CUTXTPR016BC1
- MANUAL MOTOR PROTECTOR, NON-REVERSING TYPE FRAME 45 MILLIMETER SIZE 16 AMP CURRENT RATING IP20 ENCLOSURE TYPE IEC CONSTRUCTION STANDARD BI-METALLIC AMBIENT TEMPERATURE COMPENSATED MANUAL RESET CLASS 10, 3-PHASE ADJUSTABLE FULL LOAD CURRENT RANGE 10 TO 16 AMP OVERLOADS 3 POLES 3 HP AT 200 VOLT AC, 5 HP AT 240 VOLT AC, 10 HP AT 480/600 VOLT AC 3 PHASE HP/VOLTS ON/OFF ROTARY HANDLE OPERATOR CUTLER-HAMMER BRAND APPROVAL UL, CSA, CE XTPR MODEL
$
212.84
Qty:
Part #:CUTXTCE018C01A
- FULL VOLTAGE, NON-REVERSING TYPE FRAME 45 MILLIMETER SIZE UL, CSA, CE APPROVAL PANEL/DIN RAIL MOUNTING IP00 ENCLOSURE 18 AMP (AC-3), 40 AMP (AC-1) CURRENT RATING 3 POLE(S) IEC CONSTRUCTION STANDARD 110 VOLT AC AT 50 HERTZ, 120 VOLT AC AT 60 HERTZ COIL VOLTAGE 1NC AUXILIARY CONTACT 2 HP AT 115 VOLT, 2 HP AT 200 VOLT, 3 HP AT 230 VOLT (1-PHASE UL/CSA RATING), 5 HP AT 200 VOLT/230 VOLT, 10 HP AT 460 VOLT, 15 HP AT 575 VOLT (3-PHASE UL/CSA RATING), 5 KILOWATT AT 220/230 VOLT, 7.5 KILOWATT AT 380/400 VOLT, 10 KILOWATT AT 415 VOLT, 11 KILOWATT AT 660/690 VOLT (3-PHASE 50/60 HERTZ IEC RATING) POWER RATING/VOLTAGE ROHS COMPLIANT TERMINAL TYPE SCREW OPERATING TEMPERATURE -25 TO 50 DEG C APPLICABLE STANDARD IEC/EN 60947-4-1
$
85.85
Qty:
Part #:RABPS4-11-20D2
- SQUARE STRAIGHT TYPE 20 FT NOMINAL MOUNTING HEIGH UL (CANADA AND US), CSA APPROVAL WET LOCATION APPLICATION 3/4 INCH DIA X 17 INCH L X 3 INCH THD BOLT SIZE STEEL SHAFT MATERIAL 8-1/2 INCH BOLT CIRCLE DIAMETER 2 FIXTURE(S) DRILL FIXTURE MOUNTING TYPE 3 INCH W X 5 INCH H HAND HOLE TYPE 240 LB AT 70 MPH, 165 LB AT 80 MPH, 75 LB AT 100 MPH, 110 LB AT 90 MPH, 45 LB AT 110 MPH, 20 LB AT 120 MPH ARM CAPACITY 8.3 SQ FT AT 70 MPH, 5.6 SQ FT AT 80 MPH, 3.6 SQ FT AT 90 MPH, 2.2 SQ FT AT 100 MPH, 1 SQ FT AT 110 MPH, 0.2 SQ FT AT 120 MPH EFFECTIVE PROJECTED AREA SQUARE BASE SHAFT MOUNTING TYPE 4 INCH SHAFT BOTTOM SIZE BRONZE SHAFT COLOR POLYESTER POWDER COATED SHAFT FINISH 4 INCH SHAFT TOP SIZE 1/8 INCH SHAFT WALL THICKNESS 70/80/90/100/110/120 MPH WIND LOAD RATING 8 INCH L X 8 INCH W X 3/4 INCH THK MOUNTING BASE SIZE INCLUDES GALVANIZED ANCHOR BOLT, GALVANIZED HARDWARE, ANCHOR BOLT TEMPLATE PS4 MODEL
$
895.67
Qty:
Part #:RABFFLED39W
- 11 INCH W X 7-1/2 INCH D X 10 INCH H SIZE CHIP AND FADE RESISTANT WHITE POLYESTER POWDER COATED FINISH UL, UL (CANADA AND US) APPROVAL 1/2 INCH THREADED ARM, O-RING, STAINLESS STEEL SCREW MOUNTING IP65 ENCLOSURE LED LAMP TYPE (1) 13 W, (1) 26 W LAMP WATTAGE PRECISION DIE-CAST ALUMINUM HOUSING MATERIAL 100 TO 277 VAC AT 50/60 HZ LAMP/BALLAST VOLTAGE NEMA 7 X 6 DISTRIBUTION/BEAM SPREAD 0.65 SQ FT EPA LFLOOD[R] BRAND APPLICATION WET LOCATION INITIAL INTENSITY 4596 LUMEN COLOR RENDERING INDEX 65 COLOR TEMPERATURE IN KELVIN 5000 (COOL) DRIVER INPUT WATTAGE 41 W REFLECTOR ANODIZED SEMI SPECULAR ALUMINUM WITH BUTTON PHOTOCELL WIRED FOR 120 V FFLED MODEL
$
250.16
Qty:
Part #:RABLFLED5YW
*LIMITED SUPPLY*
- 2-3/8 INCH DIA X 6 INCH L SIZE CHIP AND FADE RESISTANT WHITE POLYESTER POWDER COATED FINISH UL, UL (CANADA AND US) APPROVAL ARM MOUNTING LED LAMP TYPE 5 W LAMP WATTAGE PRECISION DIE-CAST ALUMINUM HOUSING MATERIAL 100 TO 240 VAC AT 50/60 HZ LAMP/BALLAST VOLTAGE NEMA 4 X 4, 44 DEGREE DISTRIBUTION/BEAM SPREAD LFLOOD[R] BRAND ROHS COMPLIANT APPLICATION WET LOCATION INITIAL INTENSITY 208 LUMEN COLOR RENDERING INDEX 86 COLOR TEMPERATURE IN KELVIN 3000 (WARM) DRIVER INPUT WATTAGE 5 W LENS MATERIAL MICROPRISMATIC DIFFUSION LFLED MODEL
Sold Out
$
476.02
Qty:
$
192.92
Qty:
Part #:RABALED4T150
- BRONZE POLYESTER POWDER COATED FINISH UL APPROVAL ARM MOUNTING LED LAMP TYPE 150 W LAMP WATTAGE DIE-CAST ALUMINUM HOUSING MATERIAL 120/208/240/277 V AT 50/60 HZ LAMP/BALLAST VOLTAGE TYPE 4 DISTRIBUTION/BEAM SPREAD SIZE 23.4 INCH L X 15 INCH W X 4.5 INCH H INITIAL INTENSITY 14349 LUMEN COLOR RENDERING INDEX 65 COLOR TEMPERATURE IN KELVIN 5000 (COOL) EFFECTIVE PROJECTED AREA 0.75 SQ FT ALED MODEL
$
880.02
Qty:
$
927.16
Qty:
$
190.80
Qty:
$
380.11
Qty:
Part #:RABHNLED26A
- 5-1/2 INCH DIA X 9-1/4 INCH D SIZE BRONZE POLYESTER POWDER COATED FINISH UL APPROVAL ARM, O-RING, STAINLESS STEEL SCREW MOUNTING LED LAMP TYPE 26 W LAMP WATTAGE DIE-CAST ALUMINUM HOUSING MATERIAL 120/208/240/277 V AT 50/60 HZ LAMP/BALLAST VOLTAGE NEMA 2 X 2 HORIZONTAL/VERTICAL DISTRIBUTION/BEAM SPREAD ROHS COMPLIANT DRIVER INPUT POWER 27 W LAMP INTENSITY 2272 LUMEN COLOR RENDERING INDEX 67 COLOR TEMPERATURE 5000 K LAMP LIFE 100000 HR GASKET MATERIAL HIGH TEMPERATURE SILICONE REFLECTOR MATERIAL SEMI-SPECULAR VACUUM-METALIZED POLYCARBONATE AMBIEN
$
379.98
Qty:
$
345.00
Qty:
$
95.63
Qty:
Part #:STSSCP034
- SET SCREW, EMT TYPE STEEL MATERIAL EMT CONDUIT USED ON UL (CANADA AND US), UL 514B APPROVAL 125 STANDARD PACKAGE 3/4 INCH TRADE SIZE CONCRETE-TIGHT
$
0.44
Qty:
Part #:LN200
- DIE-CAST ZINC MATERIAL THREADED INSTALLATION UL APPROVAL 250 STANDARD PACKAGE 2 INCH TRADE SIZE
$
1.89
Qty:
Part #:LN114
- DIE-CAST ZINC MATERIAL THREADED INSTALLATION UL APPROVAL 500 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE
$
0.54
Qty:
Part #:LN100
- DIE-CAST ZINC MATERIAL THREADED INSTALLATION UL APPROVAL 1000 STANDARD PACKAGE 1 INCH TRADE SIZE
$
0.37
Qty:
Part #:STSSCP200
- SET SCREW, EMT TYPE STEEL MATERIAL EMT CONDUIT USED ON UL (CANADA AND US), UL 514B APPROVAL 10 STANDARD PACKAGE 2 INCH TRADE SIZE CONCRETE-TIGHT
$
3.08
Qty:
Part #:STSSCN200
- SET SCREW TYPE STEEL MATERIAL IMC/RIGID/EMT CONDUIT USED ON UL 514B, CUL APPROVAL 10 STANDARD PACKAGE 2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1 INCLUDES (2) SET SCREW
$
2.56
Qty:
Part #:STSSCP114
- SET SCREW, EMT TYPE STEEL MATERIAL EMT CONDUIT USED ON UL (CANADA AND US), UL 514B APPROVAL 25 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CONCRETE-TIGHT
$
1.59
Qty:
Part #:STSSCP100
- SET SCREW, EMT TYPE STEEL MATERIAL EMT CONDUIT USED ON UL (CANADA AND US), UL 514B APPROVAL 100 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE-TIGHT
$
0.66
Qty:
Part #:STSSCN112
- SET SCREW TYPE STEEL MATERIAL IMC/RIGID/EMT CONDUIT USED ON UL 514B, CUL APPROVAL 10 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1 INCLUDES (2) SET SCREW
$
2.02
Qty:
Displaying: 25 - 48 of 934 Matching Items