Hammond Manufacturing
ERICO INC.
View:
Active Filters :
- Mfr / Trade Name: ERICO INC. Hammond Manufacturing Lithonia (Do Not Use, Use Acuity) s.e.s.
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:HAM18126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 6 INCH 6 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 152.4 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
50.54
Qty:
$
16.97
Qty:
Part #:HAMCS10106
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
29.97
Qty:
$
9.32
Qty:
Part #:HAMC3R12126HCR
- NEMA 3R ENCLOSURE USED ON HINGE INSTALLATION NEMA 3R ENCLOSURE HAMMOND MANUFACTURING[T] BRAND
$
113.56
Qty:
Part #:HAMCS18124
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 4 INCH 4 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 101.6 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
47.58
Qty:
$
29.67
Qty:
$
19.84
Qty:
Part #:HAMCS12126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 12 INCH 12 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
38.49
Qty:
Part #:HAMC3R18186SC
- UNFLANGED TYPE FORMED SPOT WELDED STEEL MATERIAL GALVANIZED, POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 18 INCH 18 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 6 INCH 6 DEPTH IN INCH 457.2 HEIGHT IN MM 457.2 WIDTH IN MM UL 50, CSA APPROVAL 152.4 DEPTH IN MM WALL MOUNTING NEMA 3R, IP32 ENCLOSURE SLIP ON WITH SCREW, PADLOCKABLE HASP COVER TYPE 16/14 GAUGE MATERIAL SPECIFICATION (4) (0.875 INCH-1.125 INCH), (5) (1.125 INCH-1.375 INCH) CONCENTRIC KNOCKOUT KNOCKOUT SIZE 9 KNOCKOUT(S) BOTTOM KNOCKOUT LOCATION HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
136.08
Qty:
Part #:HAMCS18186
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 18 INCH 18 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
67.54
Qty:
Part #:HAMCS24248
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 24 INCH 24 INCH 8 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
169.20
Qty:
Part #:CAD812M24SM
- H-MSM CONDUIT SNAP CLOSE CLIP, 360 DEGREE PIVOT TYPE ARMOR SPRING STEEL MATERIAL HAMMER-ON INSTALLATION UL, CUL, UL (CANADA AND US) APPROVAL SIDE MOUNTING 100 STANDARD PACKAGE 1/2 TO 3/4 INCH EMT/RIGID CONDUIT SIZE 25 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE CADDY[R] BRAND OUTER DIAMETER 0.709 TO 1.181 INCH
$
2.44
Qty:
Part #:CAD812M24
- EM-M CONDUIT SNAP CLOSE CLIP, 360 DEGREE PIVOT TYPE ARMOR SPRING STEEL MATERIAL HAMMER-ON INSTALLATION SIDE MOUNTING 100 STANDARD PACKAGE 1/2 TO 3/4 INCH EMT/RIGID CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE CADDY[R] BRAND OUTER DIAMETER 0.71 TO 1.181 INCH
$
3.07
Qty:
Part #:CADKX
- CABLE/CONDUIT CLIP TYPE ARMOR SPRING STEEL MATERIAL UL, CUL, UL (CANADA AND US) APPROVAL 100 STANDARD PACKAGE (2) 14 AWG TO (3) 12 AWG (ARMORED/METALLIC CABLE) CONDUIT/CABLE SIZE CADDY[R] BRAND OUTER DIAMETER 0.472 INCH
$
0.90
Qty:
Part #:CADK12
- CABLE/CONDUIT CLIP TYPE CADDY ARMOUR SPRING STEEL MATERIAL UL (CANADA AND US) APPROVAL 100 PER PACK STANDARD PACKAGE 15 POUND (VERTICAL), 100 POUND (HORIZONTAL) LOAD CAPACITY 1/2 TO 3/4 INCH (RIGID/EMT), 1 INCH (EMT) CONDUIT/CABLE SIZE ERICO INTERNATIONAL CORPORATION BRAND OUTER DIAMETER 0.945 INCH
$
0.85
Qty:
Part #:CADCNB812M
- NAIL BRACKET TYPE 100 PER BOX STANDARD PACKAGE 1/2 INCH, 3/4 INCH CONDUIT CONDUIT/CABLE SIZE CADDY. BRAND CNB MODEL
$
2.19
Qty:
Part #:CADMP1S
- 1-GANG TYPE PRE-GALVANIZED STEEL MATERIAL 1/2 TO 5/8 INCH DRYWALL INSTALLATION UL (CANADA AND US) APPROVAL STUD, SCREW-ON, NAIL MOUNTING 25 STANDARD PACKAGE CADDY[R] BRAND OVERALL DIMENSION 4 INCH WIDTH X 4-1/2 INCH HEIGHT MOUNTING HOLE SIZE 0.156 INCH (HOLE 1), 0.187 INCH (HOLE 2)
$
2.52
Qty:
Part #:CADCAT32HP
- J-HOOK, WIDE BASE TYPE PRE-GALVANIZED STEEL MATERIAL UL (CANADA AND US) APPROVAL 50 PER PACK STANDARD PACKAGE 60 POUND LOAD CAPACITY 2 INCH DIAMETER FITTING SIZE ERICO INTERNATIONAL CORPORATION BRAND CABLE CAPACITY 90 (CAT 5E), 60 (CAT 6) AREA 3.97 SQUARE INCH APPLICABLE STANDARD DIN 4102-12, EN 50174-2, IEC 14763-2, TIA 568, TIA 569
$
4.60
Qty:
Part #:CAD4G16
- T-BAR TO ELECTRICAL FIXTURE TYPE CADDY ARMOUR SPRING STEEL MATERIAL ELECTRICAL FIXTURE USED ON TWIST-ON INSTALLATION UL APPROVAL 100 PER PACK STANDARD PACKAGE 50 POUND LOAD CAPACITY 9/16 INCH LENGTH X 1/4 INCH DIAMETER SCREW FASTENER TYPE 15/16 INCH T BAR SIZE ERICO INTERNATIONAL CORPORATION BRAND INCLUDES WING NUT
$
1.82
Qty:
Part #:HAMC3RWT436
- 14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 36 INCH 4 INCH 4 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$
88.27
Qty:
Displaying: 1 - 24 of 81 Matching Items