ERICO INC.
COOPER BUSSMANN
View:
Active Filters :
- Mfr / Trade Name: COOPER BUSSMANN ERICO INC. On-Q s.e.s.
Part #:BUSAGC-4
- GLASS TUBE TYPE 1-1/4 INCH UL 248-14 CSA CE APPROVAL 250 VAC/VDC VOLTAGE RATING 1/4 INCH DIAMETER 200 AMPERE INTERRUPTING RATING 4 AMPERE CURRENT RATING FERRULE TERMINAL TYPE FAST ACTING CHARACTERISTICS BUSSMANN. BRAND ALBALOY PLATED BRASS END CAPS DC RATINGS ARE SELF CERTIFIED AGC MODEL
$
1.22
Qty:
Part #:BUSGLR-10
- UL CSA APPROVAL 300 VAC VOLTAGE RATING 10000 AMPERE INTERRUPTING RATING 10 AMPERE CURRENT RATING FAST ACTING CHARACTERISTICS HLR FUSE HOLDER TYPE BUSSMANN. BRAND NON REJECTION STYLE USED IN PRINTED CIRCUIT BOARD GLR MODEL
Qty:
Part #:SMI100-AC
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
14.91
Qty:
Part #:SMICO100-AC
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
61.28
Qty:
Part #:CAD812M24SM
- H-MSM CONDUIT SNAP CLOSE CLIP, 360 DEGREE PIVOT TYPE ARMOR SPRING STEEL MATERIAL HAMMER-ON INSTALLATION UL, CUL, UL (CANADA AND US) APPROVAL SIDE MOUNTING 100 STANDARD PACKAGE 1/2 TO 3/4 INCH EMT/RIGID CONDUIT SIZE 25 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE CADDY[R] BRAND OUTER DIAMETER 0.709 TO 1.181 INCH
$
2.44
Qty:
Part #:CAD812M24
- EM-M CONDUIT SNAP CLOSE CLIP, 360 DEGREE PIVOT TYPE ARMOR SPRING STEEL MATERIAL HAMMER-ON INSTALLATION SIDE MOUNTING 100 STANDARD PACKAGE 1/2 TO 3/4 INCH EMT/RIGID CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE CADDY[R] BRAND OUTER DIAMETER 0.71 TO 1.181 INCH
$
3.07
Qty:
Part #:CADKX
- CABLE/CONDUIT CLIP TYPE ARMOR SPRING STEEL MATERIAL UL, CUL, UL (CANADA AND US) APPROVAL 100 STANDARD PACKAGE (2) 14 AWG TO (3) 12 AWG (ARMORED/METALLIC CABLE) CONDUIT/CABLE SIZE CADDY[R] BRAND OUTER DIAMETER 0.472 INCH
$
0.90
Qty:
Part #:CADK12
- CABLE/CONDUIT CLIP TYPE CADDY ARMOUR SPRING STEEL MATERIAL UL (CANADA AND US) APPROVAL 100 PER PACK STANDARD PACKAGE 15 POUND (VERTICAL), 100 POUND (HORIZONTAL) LOAD CAPACITY 1/2 TO 3/4 INCH (RIGID/EMT), 1 INCH (EMT) CONDUIT/CABLE SIZE ERICO INTERNATIONAL CORPORATION BRAND OUTER DIAMETER 0.945 INCH
$
0.85
Qty:
Part #:CADCNB812M
- NAIL BRACKET TYPE 100 PER BOX STANDARD PACKAGE 1/2 INCH, 3/4 INCH CONDUIT CONDUIT/CABLE SIZE CADDY. BRAND CNB MODEL
$
2.19
Qty:
Part #:CADMP1S
- 1-GANG TYPE PRE-GALVANIZED STEEL MATERIAL 1/2 TO 5/8 INCH DRYWALL INSTALLATION UL (CANADA AND US) APPROVAL STUD, SCREW-ON, NAIL MOUNTING 25 STANDARD PACKAGE CADDY[R] BRAND OVERALL DIMENSION 4 INCH WIDTH X 4-1/2 INCH HEIGHT MOUNTING HOLE SIZE 0.156 INCH (HOLE 1), 0.187 INCH (HOLE 2)
$
2.52
Qty:
Part #:CADCAT32HP
- J-HOOK, WIDE BASE TYPE PRE-GALVANIZED STEEL MATERIAL UL (CANADA AND US) APPROVAL 50 PER PACK STANDARD PACKAGE 60 POUND LOAD CAPACITY 2 INCH DIAMETER FITTING SIZE ERICO INTERNATIONAL CORPORATION BRAND CABLE CAPACITY 90 (CAT 5E), 60 (CAT 6) AREA 3.97 SQUARE INCH APPLICABLE STANDARD DIN 4102-12, EN 50174-2, IEC 14763-2, TIA 568, TIA 569
$
4.60
Qty:
Part #:CAD4G16
- T-BAR TO ELECTRICAL FIXTURE TYPE CADDY ARMOUR SPRING STEEL MATERIAL ELECTRICAL FIXTURE USED ON TWIST-ON INSTALLATION UL APPROVAL 100 PER PACK STANDARD PACKAGE 50 POUND LOAD CAPACITY 9/16 INCH LENGTH X 1/4 INCH DIAMETER SCREW FASTENER TYPE 15/16 INCH T BAR SIZE ERICO INTERNATIONAL CORPORATION BRAND INCLUDES WING NUT
$
1.82
Qty:
Part #:CAD512
- T-BAR TO ELECTRICAL BOX TYPE PRE-GALVANIZED CADDY ARMOUR SPRING STEEL MATERIAL ELECTRICAL BOX/CONDUIT USED ON SNAP-ON INSTALLATION 50 PER PACK STANDARD PACKAGE 20 POUND LOAD CAPACITY 24 INCH SPAN BOX HANGER FASTENER TYPE ERICO INTERNATIONAL CORPORATION BRAND INCLUDES MOUNTING CLIP AND SCREW
$
14.96
Qty:
Part #:CAD65
- UL (CANADA AND US) APPLICABLE STANDARD WELDING MATERIAL CADWELD USED ON MODEL/BRAND MOLD USED ON ITEM XBCY1Y1 USED ON ITEM PART NO CADWELD[R] PLUS BRAND SIZE IDENTIFICATION RING COLOR DARK GREEN
$
9.74
Qty:
Part #:CADGRC182C
- STANDARD TYPE GR SERIES CABLE TO GROUND ROD CONNECTOR USED ON UL (CANADA AND US) APPROVAL 1/0 AWG STRANDED CONDUCTOR SIZE 3/4 INCH ROD SIZE 90 WELD METAL TYPE L160 HANDLE CLAMP TYPE COPPER CLAD ROD MATERIAL PLAIN/SECTIONAL/THREADED ROD TYPE CADWELD[R] BRAND CONDUCTOR OUTER DIAMETER 0.373 INCH GR MODEL
$
111.29
Qty:
Part #:CADGRC182Q
- STANDARD TYPE GR SERIES CABLE TO GROUND ROD CONNECTOR USED ON UL (CANADA AND US) APPROVAL 4/0 AWG STRANDED CONDUCTOR SIZE 3/4 INCH ROD SIZE 90 WELD METAL TYPE L160 HANDLE CLAMP TYPE COPPER CLAD ROD MATERIAL PLAIN/SECTIONAL/THREADED ROD TYPE CADWELD[R] BRAND CONDUCTOR OUTER DIAMETER 0.528 INCH GR MODEL
$
111.29
Qty:
Part #:PASWP3460BE
- VOICE/DATA TYPE PLASTIC MATERIAL BLUE COLOR SNAP-IN CONNECTION TYPE RJ45 CONFIGURATION UL (CANADA AND US) APPROVAL WALL PLATE MOUNTING 6 CATEGORY T568A/B WIRING CODE NUMBER OF PORTS 1 NUMBER OF PAIRS 4 TERMINATION TYPE IDC WIRE SIZE 24 TO 22 AWG OPERATING TEMPERATURE 14 TO 140 DEG F SIZE 1.28 INCH L X 0.64 INCH W X 0.87 INCH H WP3460 MODEL
$
0.06
Qty:
Part #:PASWP3460IV
- VOICE/DATA TYPE PLASTIC MATERIAL IVORY COLOR SNAP-IN CONNECTION TYPE RJ45 CONFIGURATION UL (CANADA AND US) APPROVAL WALL PLATE MOUNTING 6 CATEGORY T568A/B WIRING CODE NUMBER OF PORTS 1 NUMBER OF PAIRS 4 TERMINATION TYPE IDC WIRE SIZE 24 TO 22 AWG OPERATING TEMPERATURE 14 TO 140 DEG F SIZE 1.28 INCH L X 0.64 INCH W X 0.87 INCH H WP3460 MODEL
$
0.06
Qty:
Displaying: 1 - 20 of 20 Matching Items