Iec 60900 and Astm F1505
Energy Star Approved, Ul Listed, Culus Listed E467698
View:
Active Filters :
closeout
$
9.95
Qty:
Part #:CUTBW2100
- THERMAL MAGNETIC TYPE ECB UNIT ENCLOSURE USED ON 2 AWG TO 300 KCMIL (ALUMINUM/COPPER) WIRE SIZE UL 489, CSA APPROVAL 120/240 VAC VOLTAGE RATING 10 KILOAMPERE INTERRUPTING RATING 100 AMPERE CURRENT RATING 2 POLE(S) LINE TERMINAL TERMINAL TYPE BW MODEL
$
119.55
Qty:
Part #:CUTBW2150
- THERMAL MAGNETIC MAIN TYPE LOAD CENTER USED ON 2 AWG TO 300 KCMIL (ALUMINUM/COPPER) WIRE SIZE UL 489 APPROVAL 208 VAC STAR/120 VAC 240 VAC VOLTAGE RATING 10 KILOAMPERE INTERRUPTING RATING 150 AMPERE CURRENT RATING 2 POLE(S)
$
105.76
Qty:
Part #:CUTBW2200
- THERMAL MAGNETIC MAIN TYPE LOAD CENTER USED ON 2 AWG TO 300 KCMIL (ALUMINUM/COPPER) WIRE SIZE UL 489 APPROVAL 208 VAC STAR/120 VAC 240 VAC VOLTAGE RATING 10 KILOAMPERE INTERRUPTING RATING 200 AMPERE CURRENT RATING 2 POLE(S)
$
119.55
Qty:
Part #:KLE33532-INS
- PHILLIPS, CABINET SCREWDRIVER SET TYPE 2 PIECE(S) HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL BLACK HANDLE COLOR (1) #2 PROFILATED PHILLIPS, (1) 1/4 INCH CABINET SCREWDRIVER SET CONTENT KLEIN BRAND HANDLE TYPE DUAL INSULATED CUSHION GRIP BLADE MATERIAL INDUCTION HARDENED STEEL APPLICATION WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE200028EINS
- HOT-RIVETED JOINT, INSULATED TYPE STEEL MATERIAL 8-1/4 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH CUTS ACSR, SCREWS, NAILS, MOST HARDENED WIRE APPLICATION INDUCTION HARDENED (BODY), FORGED (HANDLE) PROCESS STEEL HANDLE MATERIAL ORANGE/GRAY HANDLE COLOR DIAGONAL, TAPERED NOSE JAW TYPE 2000 SERIES[TM] BRAND HANDLE LENGTH 6-3/4 INCH JAW THICKNESS 7/16 INCH KNIFE LENGTH STANDARD APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE602-4-INS
- CABINET TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR 1/4 INCH TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE603-4-INS
- PHILLIPS TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE6037INS
- PHILLIPS TYPE 11-5/16 INCH OVERALL LENGTH 7 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:CUTCSR2200N
- MAIN TYPE CH MAIN BREAKER LOADCENTER USED ON 120/240 VAC VOLTAGE RATING 25 KILOAMPERE INTERRUPTING RATING 200 AMPERE CURRENT RATING 2 POLE(S) CUTLER-HAMMER[R] BRAND CSR MODEL
$
285.32
Qty:
Part #:CUTNL30
- GROUND/NEUTRAL LUG TYPE TYPE CH LOADCENTER USED ON 1 QUANTITY
Qty:
Part #:CUTNL300
- GROUND/NEUTRAL LUG TYPE TYPE CH LOADCENTER USED ON 1 QUANTITY
$
31.81
Qty:
Part #:CUTCH2150
- THERMAL MAGNETIC, COMMON TRIP TYPE CH SERIES LOADCENTER USED ON 3/0 AWG (ALUMINUM/COPPER) WIRE SIZE UL 489, CSA APPROVAL 120/240 VAC VOLTAGE RATING PLUG-ON MOUNTING 10 KILOAMPERE INTERRUPTING RATING 150 AMPERE CURRENT RATING 2 POLE(S) CH MODEL
$
318.02
Qty:
Part #:CUTCCV2100
- THERMAL MAGNETIC TYPE 1MP/1MM/3MM SERIES MODULAR METER STACK USED ON 2 AWG TO 300 KCMIL (ALUMINUM/COPPER) WIRE SIZE UL 489 APPROVAL 120/240 VAC VOLTAGE RATING BOLT-ON MOUNTING 10 KILOAMPERE INTERRUPTING RATING 100 AMPERE CURRENT RATING 2 POLE(S)
$
404.37
Qty:
$
25.76
E
Qty:
$
25.63
E
Qty:
Part #:BLIN4436GGV-NK
- LAY-IN TYPE 16 GAUGE STEEL MATERIAL GALVANIZED FINISH 36 INCH 4 INCH 4 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICABLE STANDARD IEC 529 APPLICATION HOUSES RUNS OF CONTROL AND POWER CABLE, USED FOR CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
20.81
Qty:
Part #:BLIN6660GGV-NK
- LAY-IN TYPE 16 GAUGE STEEL MATERIAL GALVANIZED FINISH 60 INCH 6 INCH 6 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICABLE STANDARD IEC 529 APPLICATION HOUSES RUNS OF CONTROL AND POWER CABLE, USED FOR CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
44.32
Qty:
Part #:BLIN8860GGV-NK
- LAY-IN TYPE 14 GAUGE STEEL MATERIAL GALVANIZED FINISH 60 INCH 8 INCH 8 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICABLE STANDARD IEC 529 APPLICATION HOUSES RUNS OF CONTROL AND POWER CABLE, USED FOR CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
88.69
Qty:
Part #:BLIN4460GNK
- LAY-IN TYPE 16 GAUGE STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH 60 INCH 4 INCH 4 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICABLE STANDARD IEC 529 APPLICATION HOUSES RUNS OF CONTROL AND POWER CABLE, USED FOR CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
33.28
Qty:
Part #:BLIN4448GRT-NK
- 16 GAUGE STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH 48 INCH 4 INCH 4 INCH UL 870, CSA C22.2, IEC 529 APPROVAL NEMA 3R, IP24 ENCLOSURE SCREW COVER TYPE WIRING TROUGH NO KNOCKOUT(S) APPLICATION POWER CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
71.03
Qty:
Displaying: 1 - 24 of 50 Matching Items