Ul 67,Ul 50
Federal Specification a-a-50552, Nema/ansi Fb-1, Military Specification Number W-F-406d, W-F-406e, W-F-408d, W-S-610d
View:
$
57.92
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:ALM9313-EWK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 5-15/16 INCH 3-1/4 INCH 2-7/8 INCH 3 GANG(S) UL 514C APPROVAL (4) EARS, WING BRACKET MOUNTING 25 STANDARD PACKAGE 42.5 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9313-EW MODEL
$
5.76
Qty:
Part #:ALM9331-ESK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-1/2 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 14 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9331-ES MODEL
$
2.06
Qty:
Part #:ALM9342-HN
- MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4 INCH 4 INCH 2-1/4 INCH UL 514C APPROVAL (2) NAIL, HN HANGER MOUNTING 50 STANDARD PACKAGE 27.3 CU INCH CAPACITY (2) WIRE CLAMPS CABLE ENTRY FIBERGLASSBOX[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (WIRE CLAMP/BRACKET), ZINC PLATED STEEL (SCREW) USED ON NON-METALLIC SHEATHED CABLE
$
3.05
Qty:
Part #:ALM9343-NK
- MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4-1/16 INCH 4-1/16 INCH 2-1/2 INCH UL 514C APPROVAL (2) NAILS MOUNTING 50 STANDARD PACKAGE 32.3 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY FIBERGLASSBOX[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), ZINC PLATED STEEL (SCREW), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE
$
4.16
Qty:
$
1.99
Qty:
Part #:ALM9361-ESK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-7/8 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 16 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9361-ES MODEL
$
3.27
Qty:
Part #:ALM9363-EWK
- GANGABLE, WALL, OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-27/32 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, WING BRACKET MOUNTING 100 STANDARD PACKAGE 16 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (EAR/WING), ZINC COATED STEEL (WING SCREW) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 9363-EW MODEL
$
2.81
Qty:
Part #:ALM2302-NK
- GANGABLE, WALL, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4 INCH 3-3/4 INCH 3-7/16 INCH 2 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 50 STANDARD PACKAGE 37 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), PVC (SPEED CLAMP) APPLICATION RESIDENTIAL 2302-NK MODEL
$
3.08
Qty:
Part #:ALM3303-NK
- GANGABLE, WALL, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 5-11/16 INCH 3-3/4 INCH 3-9/16 INCH 3 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 20 STANDARD PACKAGE 56.5 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 3303-NK MODEL
$
4.31
Qty:
Part #:ALM4304-NK
- GANGABLE, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 7-1/2 INCH 3-3/4 INCH 3-9/16 INCH 4 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 20 STANDARD PACKAGE 75 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND 4304-NK MODEL
$
6.20
Qty:
Part #:ALM5305-NBK
- NEW WORK TYPE FIBERGLASS REINFORCED POLYESTER BMC MATERIAL 9-5/16 INCH 3-3/4 INCH 3-9/16 INCH 5 GANG(S) ANSI/UL 514C APPROVAL ANGLED MID NAIL, ADJUSTABLE STABILIZING BAR MOUNTING 6 PER CARTON STANDARD PACKAGE 94 CUBIC INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE ALLIED MOULDED BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (BRACKET), PLATED CARBON STEEL (FASTENER, CLAMP) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL
$
23.54
Qty:
Part #:ALM9312-EWK
- GANGABLE, WALL, OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4-1/8 INCH 3-1/4 INCH 2-3/4 INCH 2 GANG(S) UL 514C APPROVAL (4) EARS, WING BRACKET MOUNTING 50 STANDARD PACKAGE 28 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (EAR/WING), ZINC COATED STEEL (WING SCREW), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 9312-EW MODEL
$
4.18
Qty:
Part #:ALM9338-ESK
- WALL FIXTURE TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2 INCH UL 514C APPROVAL 3-1/2 INCH DIAMETER (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 14 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN FIXTURE RATING 15 LB 9338-ES MODEL
$
3.23
Qty:
Part #:ALM9368-EWK
- GANGABLE, WALL, OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 3-3/16 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, WING BRACKET MOUNTING 100 STANDARD PACKAGE 18 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (EAR) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 9368-EW MODEL
$
3.29
Qty:
Part #:LQD012CR
- FLEXIBLE TYPE 100 FT COIL 0.642 INCH INNER DIAMETER 0.839 INCH OUTER DIAMETER DAMP/WET LOCATION, COMMERCIAL, INDUSTRIAL APPLICATION COIL STANDARD PACKAGE 1/2 INCH TRADE SIZE EF STYLE CORROSION RESISTANT, OIL RESISTANT, SUNLIGHT RESISTANT PVC JACKET MATERIAL STEEL CORE MATERIAL
$
1.64
Qty:
Part #:LQD100CR
- FLEXIBLE TYPE 100 FT COIL 1.055 INCH INNER DIAMETER 1.315 INCH OUTER DIAMETER DAMP/WET LOCATION, COMMERCIAL, INDUSTRIAL APPLICATION COIL STANDARD PACKAGE 1 INCH TRADE SIZE EF STYLE CORROSION RESISTANT, OIL RESISTANT, SUNLIGHT RESISTANT PVC JACKET MATERIAL STEEL CORE MATERIAL
$
2.89
FT
Qty:
Part #:LQD114CR
- FLEXIBLE TYPE 50 FT COIL 1.394 INCH INNER DIAMETER 1.661 INCH OUTER DIAMETER DAMP/WET LOCATION, COMMERCIAL, INDUSTRIAL APPLICATION COIL STANDARD PACKAGE 1-1/4 INCH TRADE SIZE EF STYLE CORROSION RESISTANT, OIL RESISTANT, SUNLIGHT RESISTANT PVC JACKET MATERIAL STEEL CORE MATERIAL
$
3.33
FT
Qty:
Part #:LQD112CR
- FLEXIBLE TYPE 50 FT COIL 1.598 INCH INNER DIAMETER 1.902 INCH OUTER DIAMETER DAMP/WET LOCATION, COMMERCIAL, INDUSTRIAL APPLICATION COIL STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EF STYLE CORROSION RESISTANT, OIL RESISTANT, SUNLIGHT RESISTANT PVC JACKET MATERIAL STEEL CORE MATERIAL
$
6.26
FT
Qty:
Part #:LQD200CR
- EXTRA FLEXIBLE TYPE 25 FOOT 2.020 TO 2.043 INCH INNER DIAMETER 2.339 TO 2.374 INCH OUTER DIAMETER DAMP/WET LOCATION, COMMERCIAL, INDUSTRIAL APPLICATION COIL STANDARD PACKAGE 2 INCH TRADE SIZE EF STYLE OIL RESISTANT, SUNLIGHT RESISTANT, CORROSION RESISTANT PVC JACKET MATERIAL GRAY JACKET COLOR STEEL CORE MATERIAL
$
8.18
Qty:
Part #:LQD300CR
- FLEXIBLE TYPE 25 FT COIL 3.102 INCH INNER DIAMETER 3.5 INCH OUTER DIAMETER DAMP/WET LOCATION, COMMERCIAL, INDUSTRIAL APPLICATION COIL STANDARD PACKAGE 3 INCH TRADE SIZE EF STYLE CORROSION RESISTANT, OIL RESISTANT, SUNLIGHT RESISTANT PVC JACKET MATERIAL STEEL CORE MATERIAL
$
14.69
Qty:
Part #:CUTCH24L3125C
- MAIN LUG TYPE 14-5/16 INCH W X 3-7/8 INCH D X 21 INCH H SIZE 24 MAX. NUMBER OF CIRCUITS UL APPROVAL 208 VAC STAR/120 VAC 240 VAC VOLTAGE RATING 125 AMPERE CURRENT RATING NEMA 1 INDOOR ENCLOSURE TYPE 3 PHASE 4 WIRE CIRCUIT CONFIGURATION INSULATED/BONDABLE NEUTRAL TYPE BOTTOM/TOP FEED LOCATION COPPER BUS MATERIAL C ENCLOSURE SIZE DESIGNATION PLUG ON BREAKER MOUNTING 14 TO 1/0 AWG (ALUMINUM/COPPER) MAIN WIRE SIZE CH MODEL
$
289.51
Qty:
Displaying: 1 - 24 of 52 Matching Items