M12 Fuel
Firex
Part #:KIDHD135F
-
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke.
The Kidde HD135F 120VAC wire in heat alarm gives you and your family an early warning to dangerous temperatures of 135F or more
This unit also includes a tamper resist pin that helps to deter thief and tampering.
This unit can be used as a single station unit or it can be interconnected to up to 24 Kidde devices in a multiple station arrangement
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke. The alarm will sound if temperatures rise above 135F. The Kidde HD135F is interconnectable. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices (Smoke, heat, CO, etc) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. This unit includes a 5-year limited warranty and is UL Listed.
Interconnectable &ndash Interconnects with up to 24 Kidde devices of which 18 can be initiating.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
9V Battery Back Up &ndash Provides continuous protection even during power outages.
Red LED &ndash Flashes every 30-40 seconds to indicate proper operation.
Low Battery Indicator &ndash Alerts user in the event of alow or missing battery.
Quick Connect Power Harness &ndash Makes installation fast and easy.
Technical Specifications
Model
HD135F
UPC Number
0-25417-84135-0
Power Source
120VAC, 60HZ, 9V battery backup
Sensor
Heat
Audio Alarm
85dB at 10ft
Temperature Range
-20F to +100F (-29C and +38C)
Humidity Range
5%-95% relative humidity (RH)
Size
5&rdquo in diameter x 2&rdquo depth
Weight
.75lbs
Interconnects
Up to 24 Kidde devices of which 18 can be initiating devices.
LED
Green, AC power present, alarm mode flashing Red indicates originating unit
Warranty
5 year limited warranty
$
34.89
Qty:
Part #:MILW2553-20
- The M12 FUEL 1/4 in. Hex impact driver once again raises the bar for 12 V performance with best in class driving speed, power, and size. By focusing on productivity, this impact driver gets the job done faster by being over 20 percent faster in application speed vs. the competition. This tool outputs over 1,300 in-lbs of torque that allows the user to get more work done by completing a wide range of fastening. Measuring only 5.1 in. in length allows for unmatched access in tight spaces. The POWERSTATE brushless motor delivers up to 0-3, 300 RPM with constant power output to drive screws faster. REDLINK PLUS intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with M12 REDLITHIUM compact batteries or extended capacity batteries (sold separately), which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-mode drive control provides greater control over output speed and power for greater versatility by delivering 0-1, 300 RPM in mode 1, 0-2, 400 RPM in mode 2 and 0-3, 300 RPM in mode 3. Mode 4 is self-tapping screw mode which is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws. 21135
$
134.69
Qty:
Part #:MILW2555-20
- The M12 FUEL 1/2 in. Stubby impact wrench is the industries most Compact Impact Wrench on the market place. Measuring only 4.9 in. in length, this tool fits in tighter spaces, making users more productive. Increased torque delivers an industry leading 250 ft-lbs of breakaway torque, removing even the most stubborn bolts and fasteners. 4-Mode drive control, will allow unmatched control in various fastening applications. 1 to 3 RPM allows for precision control, and auto-shut off mode in the 4th setting will prevent over-fastening of bolts while doing reassembly work. 21197
$
187.04
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
$
108.63
Qty:
Part #:PASRWP264W
- SCREWLESS TYPE 0.065 INCH THK MOLDED POLYCARBONATE MATERIAL WHITE COLOR 4 GANG(S) STANDARD DESIGNATED SIZE RADIANT BRAND OVERALL DIMENSION 8.59 INCH W X 4.94 INCH H INCLUDES PLASTIC SUBPLATE APPROVAL UL 514 UL (CANADA AND US) CSA
$
13.89
Qty:
$
1.70
Qty:
$
1.52
Qty:
$
2.73
Qty:
$
8.33
Qty:
$
1.80
Qty:
$
3.96
Qty:
$
2.03
Qty:
$
12.78
Qty:
$
12.78
Qty:
Part #:HALCMH175/U
- METAL HALIDE TYPE CLEAR COLOR 8.25 INCH OVERALL LENGTH 8.25 OVERALL LENGTH IN INCH 12 STANDARD PACKAGE 175 W WATTAGE MOGUL BASE TYPE 10000 LIFE IN HOUR ED28 SHAPE DESIGNATION 4000 65 COLOR RENDERING INDEX 14000 LUMEN INITIAL INTENSITY M57/E ANSI CODE/BALLAST PROLUME[R] BRAND
$
19.72
Qty:
Part #:HALCMH250/U
- METAL HALIDE TYPE CLEAR COLOR 8.25 INCH OVERALL LENGTH 8.25 OVERALL LENGTH IN INCH 12 STANDARD PACKAGE 250 W WATTAGE MOGUL BASE TYPE 10000 LIFE IN HOUR ED28 SHAPE DESIGNATION 4000 65 COLOR RENDERING INDEX 21000 LUMEN INITIAL INTENSITY M58/E ANSI CODE/BALLAST PROLUME[R] BRAND
$
18.61
Qty:
$
19.95
Qty:
Part #:HALCMH400/U
- METAL HALIDE TYPE CLEAR COLOR 11.5 INCH OVERALL LENGTH 11.5 OVERALL LENGTH IN INCH 6 STANDARD PACKAGE 400 W WATTAGE MOGUL BASE TYPE 20000 LIFE IN HOUR ED37 SHAPE DESIGNATION 4000 65 COLOR RENDERING INDEX 36000 LUMEN INITIAL INTENSITY M59/E ANSI CODE/BALLAST PROLUME[R] BRAND
$
19.77
Qty:
$
53.41
Qty:
$
20.73
Qty:
$
36.91
Qty:
Displaying: 1 - 24 of 106 Matching Items