First Alert
Commercial Products
View:
Active Filters :
- Sub Brand: Commercial Products First Alert Prism Snap2it
Part #:ARL40AST
- Zinc die-cast, 1/2" Knockout MC cable connector snaps quickly on to the conduit with an internal spring steel clip and then snaps into knockout with external spring steel clip, no tools required. Concrete tight when taped. Red tinted internal clip indicates easier insertion of conduit and comes with Insulated throat.
$
1.31
Qty:
Part #:ARLNMLT10
- STRAIGHT TYPE UV RATED PLASTIC MATERIAL NON-METALLIC TYPE B CONDUIT USED ON UL, CSA APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE SNAP-IT[R] BRAND KNOCKOUT SIZE 1 INCH OVERALL DIMENSION 1.856 INCH DIAMETER X 2.53 INCH LENGTH COLOR GRAY INSTALLATION PUSH-ON
$
4.48
Qty:
Part #:BRK1038510
- 120V LED Strobe Light, ADA Compliant This AC hardwired signaling device is designed to meet the needs to the ADA where a 177 candela strobe light is required for deaf & hard of hearing residential and institutional applications.
» Smart Strobe &ndash Separate flash patterns to distinguish between smoke and carbon monoxide » 177 Candela LED &ndash Powerful LED strobe light provides effective visual warning intended to waken hearing impaired residents » Strobe Signal Synchronization &ndash when multiple units installed, strobes flash in unison » 1Hz Flash Rate &ndash Meets ADA, ANSI 117.1, NFPA 72 and UL STD 1971 » Slim design » 10-Year End-of-Life Timer » 10-Year Limited Warranty
$
70.16
Qty:
Part #:CUTTP432
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 3/4 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
8.09
Qty:
Part #:CUTTP451
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.75
Qty:
Part #:CUTTP512
- RAISED TYPE STEEL MATERIAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (1) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED COOPER CROUSE-HINDS. BRAND
$
1.84
Qty:
Part #:CUTTP516
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CUBIC INCH CAPACITY 4 INCH DEPTH BOX SIZE (1) DUPLEX RECEPTACLE OPENING TYPE 1/2 INCH RAISED
$
1.62
Qty:
Part #:CUTTP508
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (2) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED
$
2.06
Qty:
Part #:CUTTP510
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (2) DUPLEX RECEPTACLE OPENING TYPE 1/2 INCH RAISED
$
1.96
Qty:
Part #:CUTTP506
- RAISED TYPE STEEL MATERIAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (1) DUPLEX RECEPTACLE, (1) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED COOPER CROUSE-HINDS. BRAND
$
2.18
Qty:
Part #:CUTTP708
- STEEL MATERIAL 500 SET STANDARD PACKAGE USED ON OLD WORK SWITCH BOX
$
0.62
Qty:
Part #:CUTTP302
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER C BRACKET MOUNTING 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE KNOCKOUT SIZE 7 KNOCKOUT(S) (1) BOTTOM, (2) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
7.10
Qty:
Part #:CUTTP424
- SQUARE BOX EXTENSION RING TYPE STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL APPROVAL 50 STANDARD PACKAGE 21 CU INCH CAPACITY (12) 1/2 INCH CONDUIT SIDE KNOCKOUT SIZE 12 KNOCKOUT(S)
$
2.46
Qty:
Part #:CUTTP403
- WELDED STEEL MATERIAL 4 INCH 4 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 2-1/8 INCH 2.125 DEPTH IN INCH UL 514-A, UL 514-B, UL 514-C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH CONDUIT BOTTOM, (2) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT BOTTOM, (8) 1/2 INCH CONDUIT SIDES, (4) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT SIDES KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION COOPER CROUSE-HINDS. BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION #W-J-800E, NEMA OS-1 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
2.43
Qty:
Part #:CUTTP459
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL 1/8 INCH SETBACK VM BRACKET MOUNTING 25 STANDARD PACKAGE 21 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE, (1) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 8 KNOCKOUT(S) (1) BOTTOM, (3) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
6.24
Qty:
Part #:CUTTP478
- FLAT TYPE STEEL MATERIAL UL APPROVAL 50 STANDARD PACKAGE 4 INCH BOX SIZE 1/2 INCH KNOCKOUT OPENING TYPE APPLICABLE STANDARD NEC 370
$
1.31
Qty:
Part #:CUTTP521
- WELDED STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 44 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (12) (1/2 INCH-3/4 INCH) CONCENTRIC SIDE KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
9.40
Qty:
Part #:CUTTP452
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE, (1) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 8 KNOCKOUT(S) (1) BOTTOM, (3) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.70
Qty:
Part #:CUTTP298
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE KNOCKOUT SIZE 7 KNOCKOUT(S) (1) BOTTOM, (2) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.12
Qty:
Part #:CUTTP314
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER S BRACKET MOUNTING 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (1) 1/2 INCH SIDE KNOCKOUT SIZE 6 KNOCKOUT(S) (1) BOTTOM, (1) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
7.58
Qty:
Part #:CUTTP408
- DRAWN STEEL MATERIAL 4 INCH 4 INCH 1-1/4 INCH UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 18 CU INCH CAPACITY (5) 1/2 INCH BOTTOM, (12) 1/2 INCH SIDE KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
7.26
Qty:
Part #:CUTTP422
- SQUARE BOX EXTENSION RING TYPE STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL APPROVAL 50 STANDARD PACKAGE 21 CU INCH CAPACITY (8) 1/2 INCH CONDUIT SIDE, (4) (1/2 INCH-3/4 INCH) ECCENTRIC CONDUIT SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) USED ON SWITCH AND MASONRY BOX
$
11.57
Qty:
Displaying: 1 - 24 of 153 Matching Items