Nema Twistlock
Flange
View:
Active Filters :
- Mounting: Flange Nema Twistlock Surface Wall
Sold Out
Sold Out
Sold Out
Sold Out
$
476.02
Qty:
Part #:BNH68W
- DUPLEX, 2-FUNCTION TYPE WHITE COLOR BATH AND VENTILATION FAN APPLICATION 120 VOLT, 15 AMP SWITCH 1 TYPE 120 VOLT, 15 AMP SWITCH 2 TYPE TYPE 2-FUNCTION
$
22.17
Qty:
Part #:CWDAH460R7W
- NYLON PA6 MATERIAL 4 WIRE(S) UL 1682, UL 1686, CSA C22.2 APPROVAL 480 VAC 3-PHASE VOLTAGE RATING 60 AMPERE CURRENT RATING 3 POLE(S) WATERTIGHT ARROW HART[R] BRAND APPLICABLE STANDARD IEC 60309-1/60309-2 FLAMMABILITY RATING UL 94- HB (HOUSING), UL 94-V0 (CONTACT CARRIERS) AH MODEL
$
389.24
Qty:
Part #:INTMEK4536
- RELAY, LOCKING TYPE 3.395 INCH DIAMETER X 2.375 INCH LENGTH SIZE POLYPROPYLENE ENCLOSURE MATERIAL UL (CANADA AND US) APPROVAL EXTERIOR LIGHTING, STREET LIGHTING, PARKING LOT, PEDESTRIAN PATHWAY, LANDSCAPE LIGHTING APPLICATION 120 TO 277 VOLT AC AT 50/60 HERTZ VOLTAGE RATING TURN LOCK WITH 3-PRONG MOUNTING -40 TO 158 DEG F TEMPERATURE RATING 2.25 FC TURN OFF LIGHT LEVEL 1.5 FC TURN ON LIGHT LEVEL 1000 WATT TUNGSTEN LOAD RATING 1800 VOLT AMP BALLAST LOAD RATING INSTANT ON, 2 TO 5 SECOND DELAY OFF RESPONSE FEATURE 510 JOULE SURGE ARRESTER RATING MOV SURGE ARRESTER TYPE NIGHTFOX[TM] BRAND ROHS COMPLIANT POWER CONSUMPTION 0.5 WATT AT 277 VOLT AC ELECTRONIC BALLAST CURRENT RATING 6 AMP DIELECTRIC STRENGTH 5000 VOLT AC COVER COLOR WHITE WITH BLUE BAND PHOTOCONTROL SENSOR LOCATION SIDE EK4000 MODEL
$
30.78
Qty:
Part #:LEVIP710-DLZ
- WALL DIMMER TYPE 2.12 INCH W X 1.41 INCH D X 4.15 INCH H SIZE WHITE, IVORY, LIGHT ALMOND FINISH MULTI LOCATION, SINGLE POLE, THREE WAY OPERATION TYPE UL, CSA APPROVAL COMMERCIAL APPLICATION 120/277 VAC AT 60 HZ VOLTAGE RATING 1200 VA LOAD RATING SLIDE, ELECTRO MECHANICAL PRESET ON/OFF SWITCH OPERATOR TYPE DECORA, MULTI GANG WALL PLATE TYPE FLUORESCENT LOAD TYPE ILLUMATECH[T], DECORA[R] BRAND WITH LED LOCATOR OPERATING TEMPERATURE 0 TO 55 DEG C
$
56.73
Qty:
Part #:HAM18126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 6 INCH 6 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 152.4 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
50.54
Qty:
Part #:HAMCS10106
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
29.97
Qty:
Part #:HAMC3R12126HCR
- NEMA 3R ENCLOSURE USED ON HINGE INSTALLATION NEMA 3R ENCLOSURE HAMMOND MANUFACTURING[T] BRAND
$
113.56
Qty:
Part #:HAMCS18124
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 4 INCH 4 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 101.6 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
47.58
Qty:
$
29.67
Qty:
Part #:HAMCS12126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 12 INCH 12 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
38.49
Qty:
Part #:HAMC3R18186SC
- UNFLANGED TYPE FORMED SPOT WELDED STEEL MATERIAL GALVANIZED, POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 18 INCH 18 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 6 INCH 6 DEPTH IN INCH 457.2 HEIGHT IN MM 457.2 WIDTH IN MM UL 50, CSA APPROVAL 152.4 DEPTH IN MM WALL MOUNTING NEMA 3R, IP32 ENCLOSURE SLIP ON WITH SCREW, PADLOCKABLE HASP COVER TYPE 16/14 GAUGE MATERIAL SPECIFICATION (4) (0.875 INCH-1.125 INCH), (5) (1.125 INCH-1.375 INCH) CONCENTRIC KNOCKOUT KNOCKOUT SIZE 9 KNOCKOUT(S) BOTTOM KNOCKOUT LOCATION HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$
136.08
Qty:
Part #:HAMCS18186
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 18 INCH 18 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
67.54
Qty:
Part #:HAMCS24248
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 24 INCH 24 INCH 8 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
169.20
Qty:
Part #:HAM1414PHE
- STEEL MATERIAL PHOSPHATIZED POWDER COATED FINISH ANSI 61 GRAY COLOR 6 INCH 6 INCH 4 INCH UL 508, UL, CSA, CE, JIC EGP-1 APPROVAL BRACKET MOUNTING NEMA 12/13, IP54 ENCLOSURE CONTINUOUS HINGE, CLAMP, GASKETED, SCREW COVER TYPE 16/14 GAUGE BODY, 14 GAUGE COVER MATERIAL SPECIFICATION 14R0505 BACK PANEL ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION ELECTRIC CONTROL HOUSING, HYDRAULIC CONTROL HOUSING, INSTRUMENT ENCLOSURE, JUNCTION BOX, PNEUMATIC CONTROL HOUSING, TERMINAL WIRING ENCLOSURE ENVIRONMENTAL CONDITIONS FALLING DIRT, DUST, OIL, WAT 1414 PH MODEL
$
89.18
Qty:
Part #:HAM1414PHH4
- STEEL MATERIAL PHOSPHATIZED POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 4 INCH UL 508, UL, CSA, CE, JIC EGP-1 APPROVAL BRACKET MOUNTING NEMA 12/13, IP54 ENCLOSURE CONTINUOUS HINGE, CLAMP, GASKETED, SCREW COVER TYPE 16/14 GAUGE BODY, 14 GAUGE COVER MATERIAL SPECIFICATION 14R0707 BACK PANEL ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION ELECTRIC CONTROL HOUSING, HYDRAULIC CONTROL HOUSING, INSTRUMENT ENCLOSURE, JUNCTION BOX, PNEUMATIC CONTROL HOUSING, TERMINAL WIRING ENCLOSURE ENVIRONMENTAL CONDITIONS FALLING DIRT, DUST, OIL, WAT 1414 PH MODEL
$
109.12
Qty:
Displaying: 1 - 24 of 35 Matching Items