Gardner-Bender
American Lighting


Displaying: 1 - 20 of 20 Matching Items
20 Items
View:
Part #:SMI100-AC
120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money. &raquo Single button test/silence &raquo 9V Battery Backup &raquo Latching alarm indicator - remembers which unit initiated an alarm &raquo Smart Technology - helps reduce the number of nuisance alarms &raquo Perfect Mount - allows for easy alignment of alarm &raquo Dust Cover &raquo Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. &raquo 10-Year Limited Warranty
$ 14.91
Qty:
add to cart
Part #:SMICO100-AC
120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements. &raquo 10YR CO Sensor/10YR End of Life &raquo Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies &raquo 9V Alkaline Battery Backup &raquo Latching alarm indicator - remembers which unit initiated an alarm &raquo Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm &raquo End of Life Signal provides audible notification alarms needs to be replaced &raquo Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms &raquo Perfect Mount - allows for easy alignment of alarm &raquo Dust Cover &raquo Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. &raquo Single button test/silence &raquo 10-Year Limited Warranty
$ 61.28
Qty:
add to cart
Part #:G-BGSW-120
BAT HANDLE TYPE 0.57 INCH W X 1.13 INCH H SIZE 0.65 INCH TOGGLE LENGTH SPDT CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF/MAINTAINED ON OPERATION TYPE UL, CSA APPROVAL FOOD SERVICE EQUIPMENT, INDUSTRIAL EQUIPMENT APPLICATION 125/277 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.5 INCH L BUSHING MOUNTING 20 AMPERE AT 125 VAC, 10 AMPERE AT 277 VAC CURRENT RATING BLACK PHENOLIC PLASTIC BODY MATERIAL SPADE TERMINAL TYPE BRASS/BRIGHT NICKEL TOGGLE MATERIAL GB[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC ZINC CHROMATED STEEL FRAME, SUPPORT GSW MODEL
$ 4.60 CG
Qty:
add to cart
$ 9.19
Qty:
add to cart
Part #:MIDWR075GP6
METERED RINGLESS TYPE G90 GALVANIZED STEEL MATERIAL ZINC COATED FINISH 1 AWG TO 300 KCMIL SOLID/STRANDED (COPPER/ALUMINUM), 12 TO 2 AWG SOLID/STRANDED (COPPER/ALUMINUM, GROUND) WIRE SIZE UL, CUL APPROVAL EARTH BURIAL MOUNTING NEMA 3R ENCLOSURE 100 AMPERE CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION CB250 FIRST POSITION CIRCUIT BREAKER TYPE BR54U LEFT POSITION RECEPTACLE TYPE GFI120 THIRD POSITION CIRCUIT BREAKER TYPE CB130 SECOND POSITION CIRCUIT BREAKER TYPE 5-20R2 RIGHT POSITION RECEPTACLE TYPE R32U CENTER POSITION RECEPTACLE TYPE APPLICABLE STANDARD NEMA, NEC VOLTAGE RATING 120/240 V
$ 4,989.88
Qty:
add to cart
Part #:MIDWGS1101B12UL
MANUAL TYPE 13 INCH 26 INCH 6-3/4 INCH 12 AWG TO 1/0 KCMIL WIRE SIZE UL (CANADA AND US) APPROVAL GENERATOR APPLICATION 120/240 VAC 1-PHASE VOLTAGE RATING NEMA 3R ENCLOSURE ALUMINUM/COPPER WIRE TYPE 10000 AMPERE SHORT CIRCUIT RATING 100 AMPERE EMERGENCY CURRENT RATING 100 AMPERE MAIN CURRENT RATING CABINET SIZE 13 INCH X 26 INCH NUMBER OF POLES 2 MATERIAL G90 GALVANIZED STEEL FINISH POLYESTER POWDER COATED INCLUDES 1-1/4 INCH HUB
$ 568.54
Qty:
add to cart
Part #:MIDWGS1202B20UL
MANUAL TYPE 15-3/4 INCH 35 INCH 7 INCH 6 AWG TO 250 KCMIL WIRE SIZE UL (CANADA AND US) APPROVAL GENERATOR APPLICATION 120/240 VAC 1-PHASE VOLTAGE RATING NEMA 3R ENCLOSURE ALUMINUM/COPPER WIRE TYPE 10000 AMPERE SHORT CIRCUIT RATING 200 AMPERE EMERGENCY CURRENT RATING 200 AMPERE MAIN CURRENT RATING CABINET SIZE 15 INCH X 35 INCH NUMBER OF POLES 2 MATERIAL G90 GALVANIZED STEEL FINISH POLYESTER POWDER COATED INCLUDES 2 INCH HUB
$ 1,744.81
Qty:
add to cart
Part #:MIDWR101CB2
METERED RINGLESS TYPE G90 GALVANIZED STEEL MATERIAL ZINC COATED FINISH 1 AWG TO 300 KCMIL STRANDED (COPPER/ALUMINUM, LOAD CB BASE), 1 AWG TO 300 KCMIL STRANDED (COPPER/ALUMINUM, NEUTRAL LG SINGLE LUGS), 14 TO 8 AWG SOLID/14 TO 1/0 AWG STRANDED (COPPER, NEUTRAL SMALL SINGLE HOLES), 12 TO 8 AWG SOLID/12 TO 1/0 AWG STRANDED (ALUMINUM, NEUTRAL SMALL SINGLE HOLE), 14 TO 8 AWG SOLID/10 TO 4 AWG STRANDED (COPPER, NEUTRAL SIX LARGE HOLE), 6 TO 4 AWG STRANDED (ALUMINUM, NEUTRAL SIX LARGE HOLE), 14 TO 8 AWG SOLID/12 TO 8 AWG STRANDED (COPPER, NEUTRAL SMALL HOLE), 12 TO 8 AWG SOLID/STRANDED (ALUMINUM, NEUTRAL SMALL HOLE), 12 TO 8 AWG SOLID/12 TO 2 AWG STRANDED (COPPER/ALUMINUM, GROUND) WIRE SIZE UL APPROVAL NEMA 3R ENCLOSURE 100 AMPERE CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION CB2100 FIRST POSITION CIRCUIT BREAKER TYPE APPLICABLE STANDARD NEMA, NEC VOLTAGE RATING 120/240 V CABINET DIMENSION 14-3/4 INCH W X 4-9/16 INCH D X 26-1/4 INCH H MOUNTING SURFACE
$ 299.99
Qty:
add to cart
Part #:MIDWUG412RMW250
CUTBR50SPAST MILBU4881-O-50GB:
$ 182.94
Qty:
add to cart
Part #:MIDWUG412RMW260
GFI TYPE 6 TO 2/0 AWG LUG WIRE SIZE G90 GALVANIZED STEEL ENCLOSURE MATERIAL UL, CUL APPROVAL 120/240 V VOLTAGE RATING NEMA 3R ENCLOSURE 10 KILOAMPERE INTERRUPTING RATING 125 AMPERE CURRENT RATING 2 POLE(S) GRAY ENCLOSURE FINISH
$ 192.86
Qty:
add to cart
Part #:MIDWU054
UNMETERED TYPE UL, CUL APPROVAL 50 AMP CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION 14-50R CENTER POSITION RECEPTACLE TYPE VOLTAGE RATING 120/240 VOLT CABINET DIMENSION 5-3/4 INCH WIDTH X 5-3/16 INCH DEPTH X 7-1/8 INCH HEIGHT MOUNTING TYPE SURFACE
$ 56.16
Qty:
add to cart
Part #:MIDWB12
BOLT-ON MOUNTING 10 STANDARD PACKAGE 1-1/4 INCH CONDUIT SIZE
$ 11.14
Qty:
add to cart
Part #:MIDWB20
BOLT-ON MOUNTING 10 STANDARD PACKAGE 2 INCH CONDUIT SIZE
$ 12.48
Qty:
add to cart
Part #:MIDWU013
UNMETERED TYPE G90 GALVANIZED STEEL MATERIAL ZINC COATED FINISH 14 TO 10 AWG SOLID/STRANDED (COPPER, LINE), 14 TO 10 AWG SOLID/STRANDED (COPPER, NEUTRAL), 12 TO 8 AWG SOLID, 12 TO 2 AWG STRANDED (COPPER, GROUND) WIRE SIZE UL, CUL APPROVAL NEMA 3R ENCLOSURE 30 AMPERE CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION R32U CENTER POSITION RECEPTACLE TYPE APPLICABLE STANDARD NEMA, NEC VOLTAGE RATING 120 V CABINET DIMENSION 5-3/4 INCH W X 5-3/16 INCH D X 7-1/8 INCH H MOUNTING SURFACE
$ 71.17
Qty:
add to cart
Part #:MIDWU075CTL010
UNMETERED TYPE G90 STEEL MATERIAL ZINC COATED FINISH 14 TO 8 AWG SOLID, 14 TO 1/0 AWG STRANDED (COPPER, LINE), 12 TO 8 AWG SOLID, 12 TO 1/0 AWG STRANDED (ALUMINUM, LINE), 14 TO 8 AWG SOLID, 14 TO 1/0 AWG STRANDED (COPPER, LOAD), 12 TO 8 AWG SOLID, 12 TO 1/0 AWG STRANDED (COPPER, NEUTRAL-LARGE HOLE), 10 TO 8 WIRE SIZE UL, CUL APPROVAL NEMA 3R ENCLOSURE 100 AMP CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION NO ILLUMINATED CB250 FIRST POSITION CIRCUIT BREAKER TYPE BR54U LEFT POSITION RECEPTACLE TYPE CB120 THIRD POSITION CIRCUIT BREAKER TYPE CB130 SECOND POSITION CIRCUIT BREAKER TYPE 5-20R2GFCI RIGHT POSITION RECEPTACLE TYPE R32U CENTER POSITION RECEPTACLE TYPE VOLTAGE RATING 120/240 VOLT CABINET DIMENSION 9-3/4 INCH WIDTH X 5-3/16 INCH DEPTH X 17-3/8 INCH HEIGHT MOUNTING TYPE SURFACE APPLICABLE STANDARD NEMA, NEC
$ 279.32
Qty:
add to cart
Part #:MIDWR101CP6
METERED RINGLESS TYPE G90 GALVANIZED STEEL MATERIAL DURABLE POLYESTER POWDER COATED FINISH 2 AWG TO 250 KCMIL (COPPER/ALUMINUM, LINE), 12 TO 2 AWG (COPPER/ALUMINUM, GROUND) WIRE SIZE UL APPROVAL PEDESTAL MOUNTING NEMA 3R ENCLOSURE 100 AMPERE CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION CB2100 FIRST POSITION CIRCUIT BREAKER TYPE APPLICABLE STANDARD NEMA, NEC VOLTAGE RATING 120/240 V CABINET DIMENSION 9 INCH D X 77-1/2 INCH H
$ 448.50
Qty:
add to cart
Part #:MIDWU280C1
UNMETERED TYPE G90 GALVANIZED STEEL MATERIAL ZINC COATED FINISH 1 TO 4/0 AWG STRANDED (COPPER, LINE/LOAD), 2/0 TO 4/0 AWG STRANDED (ALUMINUM, LINE/LOAD), 1 TO 4/0 AWG STRANDED (COPPER/ALUMINUM, NEUTRAL), 6 TO 2/0 AWG STRANDED (COPPER/ALUMINUM, GROUND) WIRE SIZE UL APPROVAL NEMA 3R ENCLOSURE 200 AMPERE CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION CB4200H FIRST POSITION CIRCUIT BREAKER TYPE APPLICABLE STANDARD NEMA, NEC VOLTAGE RATING 120/240 V CABINET DIMENSION 9-5/16 INCH W X 4-3/4 INCH D X 21-3/4 INCH H MOUNTING SURFACE
$ 474.07
Qty:
add to cart
Part #:MIDWU281C1
UNMETERED TYPE G90 GALVANIZED STEEL MATERIAL ZINC COATED FINISH 1 TO 4/0 AWG STRANDED (COPPER, LINE/LOAD), 2/0 TO 4/0 AWG STRANDED (ALUMINUM, LINE/LOAD), 1 TO 4/0 AWG STRANDED (COPPER/ALUMINUM, NEUTRAL A), 6 TO 2/0 AWG STRANDED (COPPER/ALUMINUM NEUTRAL/GROUND B), 14 TO 8 AWG SOLID/14 TO 4 AWG STRANDED (COPPER, NEUTRAL WIRE SIZE UL APPROVAL NEMA 3R ENCLOSURE 200 AMPERE CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION CB4200H FIRST POSITION CIRCUIT BREAKER TYPE APPLICABLE STANDARD NEMA, NEC VOLTAGE RATING 120/240 V CABINET DIMENSION 9-5/16 INCH W X 4-3/4 INCH D X 21-3/4 INCH H MOUNTING SURFACE
$ 259.00
Qty:
add to cart
Part #:MIDWR281CB1
METERED RINGLESS TYPE G90 GALVANIZED STEEL MATERIAL ZINC COATED FINISH 6 TO 350 KCMIL STRANDED (COPPER/ALUMINUM, LINE METER SOCKET), 1 TO 4 AWG STRANDED (COPPER/ALUMINUM, LOAD BASE LUG/NEUTRAL A), 6 TO 2/0 AWG STRANDED (COPPER/ALUMINUM, NEUTRAL/GROUND B), 14 TO 8 AWG SOLID/14 TO 4 AWG STRANDED (COPPER, NEUTRAL/GROUND C), 12 WIRE SIZE UL APPROVAL NEMA 3R ENCLOSURE 200 AMP CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION CB4200H FIRST POSITION CIRCUIT BREAKER TYPE MIDWEST ELECTRIC BRAND VOLTAGE RATING 120/240 VOLT CABINET DIMENSION 14-3/8 INCH WIDTH X 4-3/4 INCH DEPTH X 28-5/8 INCH HEIGHT MOUNTING TYPE SURFACE APPLICABLE STANDARD NEMA, NEC
$ 280.63
Qty:
add to cart
 
Displaying: 1 - 20 of 20 Matching Items