Madison Electric Products
Hammond Manufacturing
View:
Active Filters :
- Mfr / Trade Name: Hammond Manufacturing Madison Electric Products PASS & SEYMOUR RAB TOPAZ ELECTRIC
Sold Out
Sold Out
Sold Out
Sold Out
Sold Out
closeout
$
9.95
Qty:
![3/4 NM CABLE CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN034.jpg)
Part #:RXCN034
- ZINC ELECTROPLATED STEEL MATERIAL (2) SCREW TILT-IN INSTALLATION ROMEX/NON-METALLIC CABLE CABLE TYPE (2) OR (3) 8 AWG, 6 AWG, 4 AWG CABLE SIZE 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 INCH, 1 INCH KNOCKOUT SIZE NON-INSULATED THROAT TYPE
$
1.28
Qty:
Part #:TOP457
- GRAY PLASTIC MATERIAL SNAP-IN INSTALLATION NON-METALLIC CABLE CABLE TYPE (2) 14 AWG OR (2) 12 AWG CABLE SIZE UL APPROVAL 1000 PER CASE STANDARD PACKAGE 1/2 INCH KNOCKOUT SIZE ROHS COMPLIANT SIZE 1 INCH DIA
$
0.29
Qty:
closeout
$
10.95
Qty:
$
1.45
Qty:
closeout
$
11.95
Qty:
Part #:ASB0
- ANTI-SHORT TYPE NON-METALLIC MATERIAL (3) 14 AWG, (2) 14 AWG, (2) 12 AWG (ARMORED CABLE) CABLE SIZE UL APPROVAL 20 STANDARD PACKAGE #0, 5/16 INCH TRADE SIZE COLOR BRIGHT RED
$
2.55
Qty:
Part #:PASPJSC8I
- THERMOSET MATERIAL SMOOTH FINISH IVORY COLOR (1) DUPLEX RECEPTACLE CONFIGURATION SEMI JUMBO DESIGNATED SIZE CENTER SECTION MOUNTING TYPE SCREW MOUNT APPLICATION COMMERCIAL INDUSTRIAL AND RESIDENTIAL
$
5.02
Qty:
Part #:PASPJSE14I
- THERMOSET MATERIAL SMOOTH FINISH IVORY COLOR (1) BLANK CONFIGURATION SEMI JUMBO DESIGNATED SIZE END SECTION MOUNTING TYPE STRAP MOUNT APPLICATION COMMERCIAL INDUSTRIAL AND RESIDENTIAL
$
5.02
Qty:
Part #:PASPT2095NTLTRW
- DUPLEX TYPE HIGH IMPACT RESISTANT THERMOPLASTIC MATERIAL WHITE COLOR 5-20R CONFIGURATION 3 WIRE(S) SPECIFICATION GRADE UL 498/943 UL (CANADA AND US) CUL CSA C22.2 FSUL WC596 APPROVAL 125 VAC AT 60 HZ VOLTAGE RATING 20 AMPERE CURRENT RATING 2 POLE(S) APPLICABLE STANDARD NEMA WD-1/WD-6 CONSTRUCTIONAL FEATURE TAMPER RESISTANT OVERALL DIMENSION 1.72 INCH W X 1.13 INCH D X 4.2 INCH H TEMPERATURE RATING -35 TO 66 DEG C
$
49.79
Qty:
$
1.19
Qty:
Part #:STSSCN114
- SET SCREW TYPE STEEL MATERIAL IMC/RIGID/EMT CONDUIT USED ON UL 514B, CUL APPROVAL 25 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1 INCLUDES (2) SET SCREW
$
1.39
Qty:
Part #:LN112
- DIE-CAST ZINC MATERIAL THREADED INSTALLATION UL APPROVAL 200 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE
$
0.77
Qty:
Part #:STSSCP012
- SET SCREW, EMT TYPE STEEL MATERIAL EMT CONDUIT USED ON UL (CANADA AND US), UL 514B APPROVAL 250 STANDARD PACKAGE 1/2 INCH TRADE SIZE CONCRETE-TIGHT
$
0.33
Qty:
Part #:LN012
- DIE-CAST ZINC MATERIAL THREADED INSTALLATION UL APPROVAL 1000 STANDARD PACKAGE 1/2 INCH TRADE SIZE
$
0.29
Qty:
Part #:STSSCN100
- SET SCREW TYPE STEEL MATERIAL IMC/RIGID/EMT CONDUIT USED ON UL 514B, CUL APPROVAL 100 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1
$
0.69
Qty:
Qty:
Part #:RABPS4-11-20D2
- SQUARE STRAIGHT TYPE 20 FT NOMINAL MOUNTING HEIGH UL (CANADA AND US), CSA APPROVAL WET LOCATION APPLICATION 3/4 INCH DIA X 17 INCH L X 3 INCH THD BOLT SIZE STEEL SHAFT MATERIAL 8-1/2 INCH BOLT CIRCLE DIAMETER 2 FIXTURE(S) DRILL FIXTURE MOUNTING TYPE 3 INCH W X 5 INCH H HAND HOLE TYPE 240 LB AT 70 MPH, 165 LB AT 80 MPH, 75 LB AT 100 MPH, 110 LB AT 90 MPH, 45 LB AT 110 MPH, 20 LB AT 120 MPH ARM CAPACITY 8.3 SQ FT AT 70 MPH, 5.6 SQ FT AT 80 MPH, 3.6 SQ FT AT 90 MPH, 2.2 SQ FT AT 100 MPH, 1 SQ FT AT 110 MPH, 0.2 SQ FT AT 120 MPH EFFECTIVE PROJECTED AREA SQUARE BASE SHAFT MOUNTING TYPE 4 INCH SHAFT BOTTOM SIZE BRONZE SHAFT COLOR POLYESTER POWDER COATED SHAFT FINISH 4 INCH SHAFT TOP SIZE 1/8 INCH SHAFT WALL THICKNESS 70/80/90/100/110/120 MPH WIND LOAD RATING 8 INCH L X 8 INCH W X 3/4 INCH THK MOUNTING BASE SIZE INCLUDES GALVANIZED ANCHOR BOLT, GALVANIZED HARDWARE, ANCHOR BOLT TEMPLATE PS4 MODEL
$
895.67
Qty:
Displaying: 1 - 24 of 869 Matching Items