Provides a Change in Direction in a Conduit Run
Ideal Where High Brightness and Good Illumination Levels Are Required Such as Retail, Light Industrial and Warehouses
View:
Part #:CWDOS306UBK
- SENSOR WITH RELAY TYPE 1.55 INCH WIDTH X 1.85 INCH DEPTH X 2.6 INCH HEIGHT SIZE BLACK FINISH UL (CANADA AND US), NOM 426 APPROVAL INDOOR APPLICATION 120 VOLT AC VOLTAGE RATING WALL MOUNTING 600 WATT AT 120 VOLT AC AT 60 HERTZ (INCANDESCENT), 600 WATT AT 120 VOLT AC AT 60 HERTZ (FLUORESCENT), 1/4 HP AT 120 V (MOTOR) LOAD RATING 180 DEGREE FIELD OF VIEW PASSIVE INFRARED SENSOR TYPE 450 SQUARE FOOT AREA COVERAGE INCANDESCENT/FLUORESCENT/MOTOR LOAD TYPE 5 TO 30 MINUTE TIME DELAY ROHS COMPLIANT CALIFORNIA TITLE 24 COMPLIANT MATERIAL INJECTION MOLDED POLYCARBONATE RESIN HOUSING, REINFORCED TAMPER RESISTANT FRESNEL LENS WIRING TYPE 1-POLE/3 WAY TEMPERATURE RATING 32 TO 104 DEG F
$
37.84
Qty:
$
67.31
Qty:
$
58.47
Qty:
Part #:GALEL012-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 4 INCH BEND RADIUS ROHS COMPLIANT LENGTH 1-1/2 INCH (STRAIGHT) OFFSET SIZE 5-3/8 INCH
$
9.20
Qty:
Part #:GALEL034-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 4-1/2 INCH BEND RADIUS ROHS COMPLIANT LENGTH 1-1/2 INCH (STRAIGHT) OFFSET SIZE 5-3/4 INCH
$
9.61
Qty:
Part #:GALEL100-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS ROHS COMPLIANT LENGTH 1-7/8 INCH (STRAIGHT) OFFSET SIZE 7-1/4 INCH
$
15.01
Qty:
Part #:GALEL114-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 20 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 7-1/4 INCH BEND RADIUS ROHS COMPLIANT LENGTH 2 INCH (STRAIGHT) OFFSET SIZE 8-1/2 INCH
$
20.99
Qty:
Part #:GALEL112-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 15 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS ROHS COMPLIANT LENGTH 2 INCH (STRAIGHT) OFFSET SIZE 9-1/4 INCH
$
35.76
Qty:
Part #:GALEL100-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS ROHS COMPLIANT LENGTH 1-7/8 INCH (STRAIGHT) OFFSET SIZE 7-5/8 INCH
$
20.44
Qty:
Part #:GALEL200-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 10 STANDARD PACKAGE 2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 9-1/2 INCH BEND RADIUS ROHS COMPLIANT LENGTH 2 INCH (STRAIGHT) OFFSET SIZE 11-1/2 INCH
$
53.04
Qty:
Part #:GALEL300-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 1 STANDARD PACKAGE 3 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 13 INCH BEND RADIUS ROHS COMPLIANT LENGTH 3-1/8 INCH (STRAIGHT) OFFSET SIZE 14-1/2 INCH
$
142.80
Qty:
Part #:GALEL400-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 1 STANDARD PACKAGE 4 INCH TRADE SIZE EXTERNAL THREADED END TYPE 45 DEGREE BEND ANGLE 16 INCH BEND RADIUS ROHS COMPLIANT LENGTH 3-3/8 INCH (STRAIGHT) OFFSET SIZE 17-1/8 INCH
$
235.06
Qty:
Part #:CUTTP452
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE, (1) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 8 KNOCKOUT(S) (1) BOTTOM, (3) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.70
Qty:
Part #:GALEL012-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 4 INCH BEND RADIUS ROHS COMPLIANT LENGTH 1-1/2 INCH (STRAIGHT) OFFSET SIZE 5-1/2 INCH
$
12.52
Qty:
Part #:GALEL034-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 4-1/2 INCH BEND RADIUS ROHS COMPLIANT LENGTH 1-1/2 INCH (STRAIGHT) OFFSET SIZE 6 INCH
$
13.08
Qty:
Part #:GALEL112-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 15 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS ROHS COMPLIANT LENGTH 2 INCH (STRAIGHT) OFFSET SIZE 10-1/4 INCH
$
34.76
Qty:
Part #:GALEL212-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 1 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE EXTERNAL THREADED END TYPE 90 DEGREE BEND ANGLE 10-1/2 INCH BEND RADIUS ROHS COMPLIANT LENGTH 3 INCH (STRAIGHT) OFFSET SIZE 13-1/2 INCH
$
105.17
Qty:
Part #:CUTTP560
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (8) 1 INCH SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (5) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.81
Qty:
Part #:CUTTP556
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (8) 1/2 INCH SIDE, (4) 3/4 INCH SIDE KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
11.32
Qty:
Part #:CUTTP563
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (6) 1/2 INCH SIDE, (6) (1/2 INCH-3/4 INCH) CONCENTRIC SIDE KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.68
Qty:
Part #:CUTTP554
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (8) 3/4 INCH SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (5) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
12.20
Qty:
Part #:CUTTP558
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (4) 3/4 INCH SIDE, (4) 1 INCH SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (5) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.63
Qty:
Displaying: 1 - 24 of 37 Matching Items