Ul Federal Spec. W-F-406e
Iec 60900 and Astm F1505
View:
Part #:3M35-GRAY-3/4X66FT
- COLOR CODING, INSULATING TYPE VINYL MATERIAL GRAY FINISH 66 FT 3/4 INCH UL 510 APPROVAL PREMIUM GRADE APPLICATION 600 V VOLTAGE RATING 7 MIL THICKNESS 32 TO 220 DEG F TEMPERATURE RATING 7 THICKNESS IN MIL 1250 V PER MIL DIELECTRIC STRENGTH SCOTCH[R] BRAND STANDARD PACKAGE 100 PER CASE 35 MODEL
$
11.06
Qty:
$
11.06
Qty:
$
11.06
Qty:
$
11.06
Qty:
$
11.06
Qty:
$
11.06
Qty:
$
11.06
Qty:
$
11.06
Qty:
Part #:3M35-VIOLET-3/4X66FT
- COLOR CODING, INSULATING TYPE VINYL MATERIAL VIOLET FINISH 66 FT 3/4 INCH UL 510 APPROVAL PREMIUM GRADE APPLICATION 600 V VOLTAGE RATING 7 MIL THICKNESS 32 TO 220 DEG F TEMPERATURE RATING 7 THICKNESS IN MIL 1250 V PER MIL DIELECTRIC STRENGTH SCOTCH[R] BRAND STANDARD PACKAGE 100 PER CASE 35 MODEL
$
11.06
Qty:
$
57.92
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:INTMK4021C
- THERMAL TYPE 15/16 INCH WIDTH X 13/16 INCH DEPTH X 1-13/16 INCH HEIGHT SIZE SONIC WELDED POLYCARBONATE ENCLOSURE MATERIAL UL, CSA (CANADA AND US) APPROVAL PARKING LOT LIGHTING, AREA LIGHTING, CAR LOT LIGHTING, SECURITY LIGHTING, BILLBOARD LIGHTING, MUNICIPAL LIGHTING, ROADWAY LIGHTING, STREET LIGHTING APPLICATION 120 VOLT VOLTAGE RATING 3/8 INCH-18 TPI MALE THREADED X 3/4 INCH LENGTH STEM MOUNTING -40 TO 158 DEG F TEMPERATURE RATING 18 AWG 9 INCH WIRE LEAD TERMINAL TYPE 3 TO 15 FC TURN OFF LIGHT LEVEL 1 TO 5 FC TURN ON LIGHT LEVEL 1800 WATT TUNGSTEN LOAD RATING 1000 VOLT AMP BALLAST LOAD RATING INTERMATIC BRAND WALLPLATE SIZE 2-3/4 INCH WIDTH X 4-1/2 INCH HEIGHT TUNGSTEN CURRENT RATING 15 AMP BALLAST CURRENT RATING 8.3 AMP MATERIAL BI-METAL (SWITCH), CADMIUM SULFIDE (PHOTOCELL) COLOR GRAY K4000 MODEL
$
15.64
Qty:
Part #:INTMK4121C
- THERMAL TYPE 1-9/16 INCH WIDTH X 1-9/16 INCH DEPTH X 3 INCH HEIGHT SIZE SONIC WELDED POLYCARBONATE ENCLOSURE MATERIAL UL, CSA (CANADA AND US) APPROVAL OUTDOOR LIGHTING APPLICATION 120 VOLT AC VOLTAGE RATING 1/2 INCH-14 TPI MALE THREADED STEM MOUNTING -40 TO 158 DEG F TEMPERATURE RATING 18 AWG 9 INCH WIRE LEAD TERMINAL TYPE 3 TO 15 FC TURN OFF LIGHT LEVEL 1 TO 5 FC TURN ON LIGHT LEVEL 1800 WATT TUNGSTEN LOAD RATING 1000 VOLT AMP BALLAST LOAD RATING INTERMATIC BRAND TUNGSTEN CURRENT RATING 15 AMP BALLAST CURRENT RATING 8.3 AMP MATERIAL BI-METAL (SWITCH), CADMIUM SULFIDE (PHOTOCELL) COLOR GRAY INCLUDES WASHER GASKET AND LOCKNUT K4100 MODEL
$
16.92
Qty:
Part #:KLE33532-INS
- PHILLIPS, CABINET SCREWDRIVER SET TYPE 2 PIECE(S) HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL BLACK HANDLE COLOR (1) #2 PROFILATED PHILLIPS, (1) 1/4 INCH CABINET SCREWDRIVER SET CONTENT KLEIN BRAND HANDLE TYPE DUAL INSULATED CUSHION GRIP BLADE MATERIAL INDUCTION HARDENED STEEL APPLICATION WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE200028EINS
- HOT-RIVETED JOINT, INSULATED TYPE STEEL MATERIAL 8-1/4 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH CUTS ACSR, SCREWS, NAILS, MOST HARDENED WIRE APPLICATION INDUCTION HARDENED (BODY), FORGED (HANDLE) PROCESS STEEL HANDLE MATERIAL ORANGE/GRAY HANDLE COLOR DIAGONAL, TAPERED NOSE JAW TYPE 2000 SERIES[TM] BRAND HANDLE LENGTH 6-3/4 INCH JAW THICKNESS 7/16 INCH KNIFE LENGTH STANDARD APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE602-4-INS
- CABINET TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR 1/4 INCH TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE603-4-INS
- PHILLIPS TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE6037INS
- PHILLIPS TYPE 11-5/16 INCH OVERALL LENGTH 7 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:CG012450
- STRAIGHT TYPE ZINC PLATED STEEL (BODY), NEOPRENE (GLAND) MATERIAL UL 514B APPROVAL 1/2 INCH THREAD SIZE 0.35 TO 0.45 INCH CORD SIZE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-406E TEMPERATURE RATING 105 DEG C PACKAGING QUANTITY 100
$
6.31
Qty:
Part #:CG012560
- STRAIGHT TYPE ZINC PLATED STEEL (BODY), NEOPRENE (GLAND) MATERIAL UL 514B APPROVAL 1/2 INCH THREAD SIZE 0.45 TO 0.56 INCH CORD SIZE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-406E TEMPERATURE RATING 105 DEG C PACKAGING QUANTITY 100
$
6.31
Qty:
Part #:CG034750
- STRAIGHT TYPE ZINC PLATED STEEL (BODY), NEOPRENE (GLAND) MATERIAL UL 514B APPROVAL 3/4 INCH THREAD SIZE 0.65 TO 0.75 INCH CORD SIZE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-406E TEMPERATURE RATING 105 DEG C PACKAGING QUANTITY 50
$
5.19
Qty:
Part #:CG034250
- STRAIGHT TYPE ZINC PLATED STEEL (BODY), NEOPRENE (GLAND) MATERIAL UL 514B APPROVAL 3/4 INCH THREAD SIZE 0.15 TO 0.25 INCH CORD SIZE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-406E TEMPERATURE RATING 105 DEG C PACKAGING QUANTITY 50
$
518.90
Qty:
Part #:CG012350
- STRAIGHT TYPE ZINC PLATED STEEL (BODY), NEOPRENE (GLAND) MATERIAL UL 514B APPROVAL 1/2 INCH THREAD SIZE 0.25 TO 0.35 INCH CORD SIZE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-406E TEMPERATURE RATING 105 DEG C PACKAGING QUANTITY 100
$
5.13
Qty:
Part #:CG034850
- STRAIGHT TYPE ZINC PLATED STEEL (BODY), NEOPRENE (GLAND) MATERIAL UL 514B APPROVAL 3/4 INCH THREAD SIZE 0.75 TO 0.85 INCH CORD SIZE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-406E TEMPERATURE RATING 105 DEG C PACKAGING QUANTITY 50
$
5.11
Qty:
Displaying: 1 - 24 of 24 Matching Items