Multi-Bit Interchangeable Screwdrivers/nut Drivers
Increases Job Speed by Combining Taps and Drivers in One Tool
View:
Part #:RABPS4-11-10D2
- POLE 4 Inch SQUARE 11 GAUGE 10FT DRILLED 2 SIDE AT 180DEG AND PLUGS
$
577.50
Part #:RABPS4-11-15D2
- POLE 4 Inch SQUARE 11 GAUGE 15FT DRILLED 2 SIDES AT 180DEG AND PLUGS
$
1,204.00
Part #:RABPS4-11-20D2
- SQUARE STRAIGHT TYPE 20 FT NOMINAL MOUNTING HEIGH UL (CANADA AND US), CSA APPROVAL WET LOCATION APPLICATION 3/4 INCH DIA X 17 INCH L X 3 INCH THD BOLT SIZE STEEL SHAFT MATERIAL 8-1/2 INCH BOLT CIRCLE DIAMETER 2 FIXTURE(S) DRILL FIXTURE MOUNTING TYPE 3 INCH W X 5 INCH H HAND HOLE TYPE 240 LB AT 70 MPH, 165 LB AT 80 MPH, 75 LB AT 100 MPH, 110 LB AT 90 MPH, 45 LB AT 110 MPH, 20 LB AT 120 MPH ARM CAPACITY 8.3 SQ FT AT 70 MPH, 5.6 SQ FT AT 80 MPH, 3.6 SQ FT AT 90 MPH, 2.2 SQ FT AT 100 MPH, 1 SQ FT AT 110 MPH, 0.2 SQ FT AT 120 MPH EFFECTIVE PROJECTED AREA SQUARE BASE SHAFT MOUNTING TYPE 4 INCH SHAFT BOTTOM SIZE BRONZE SHAFT COLOR POLYESTER POWDER COATED SHAFT FINISH 4 INCH SHAFT TOP SIZE 1/8 INCH SHAFT WALL THICKNESS 70/80/90/100/110/120 MPH WIND LOAD RATING 8 INCH L X 8 INCH W X 3/4 INCH THK MOUNTING BASE SIZE INCLUDES GALVANIZED ANCHOR BOLT, GALVANIZED HARDWARE, ANCHOR BOLT TEMPLATE PS4 MODEL
$
985.67
Part #:RABPS4-11-25D2
- POLE 4 Inch SQUARE 11 GAUGE 25FT DRILLED 2 SIDES AT 180DEG AND PLUGS
$
1,418.50
Part #:RABPS4-11-20WT
- POLE 4 Inch SQUARE 11 GAUGE 20FT WELDED TENON SQUARE BASE
$
1,035.00
Part #:RABPS4-11-10WT
- POLE 4 Inch SQUARE 11 GAUGE 10FT WELDED TENON SQUARE BASE
$
886.00
Part #:RABPS4-11-15WT
- POLE 4 Inch SQUARE 11 GAUGE 15FT WELDED TENON SQUARE BASE
$
903.00
Part #:RABPS4-07-25WT
- POLE 4 Inch SQUARE 7 GAUGE 25FT WELDED TENON SQUARE BASE
$
1,537.50
Part #:RABPS4-07-20WT
- POLE 4 Inch SQUARE 7 GAUGE 20FT WELDED TENON SQUARE BASE
$
1,467.00
$
1,875.53
Part #:RABPR4-11-15D2
- POLE 4" ROUND 11 GAUGE 15 FOOT DRILLED TWO SIDES SQUARE BASE
$
796.50
Part #:RABPR4-11-15WT
- POLE 4" ROUND 11 GAUGE 15 FOOT WELDED TENON SQUARE BASE
$
796.50
Part #:KLE32303
-
14-in-1 Multi-Bit Adjustable Length Screwdriver
32303
Multi-bit screwdriver includes 13 different screwdriver bits and a 1/4-Inch nut driver
Industrial-strength bits that are conveniently housed in the handle
Adjust the length of the blade for easier access
Impact rated blade can be removed for use as an impact driver attachment
Stainless steel bit holder contains powerful rare earth magnets for securing bits and fasteners
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Part #:KLE32305
-
15-in-1 Multi-Bit Ratcheting Screwdriver
32305
Multi-Bit screwdriver features a durable ratcheting mechanism for faster and easier all-day driving
On-board storage of 14 different double-sided screwdriver bits and a 1/4-Inch nut driver
Industrial-strength bits that are conveniently housed in the handle
Collar sets ratchet direction at forward, fixed and reverse
Cushion-Grip handle for great torque and maximum comfort
Spin cap for optimum and precise control
Includes Phillips (#0, #1, #2, #3), Slotted (3/16-Inch, 1/4-Inch), Square (#1, #2), Torx® (T10, T15, T20, T25), and Combo (#1, #2) bits
TORX® is a registered trademark of Acument Intellectual Properties, LLC
Part #:KLE32307
-
27-in-1 Multi-Bit Tamperproof Screwdriver
32307
Multi-Bit screwdriver features convenient on-board storage of 26 different tamperproof bits and a 1/4-Inch nut driver
Barrel contains powerful rare earth magnets for securing bits and fasteners
Industrial-strength, double-sided bits that are conveniently housed in the handle eliminating the need for a bulky bit block
Stainless steel barrel provides great impact and wear resistance
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Includes the following tamper-proof bits Torx®, TORQ-SET®, Hex, and Spanner
TORQ-SET® is a registered trademark of Phillips Screw Co TORX® is a registered trademark of Acument Intellectual Properties, LLC
Part #:KLE32308
-
8-in-1 Multi-Bit Adjustable Length Stubby Screwdriver
32308
Multi-bit stubby screwdriver includes 7 different screwdriver bits and a 1/4-Inch nut driver
Compact driver reaches easily into tight spots
Industrial-strength bits that are conveniently housed in the handle
Adjust the length of the blade for easier access
Impact rated blade can be removed for use as an impact driver attachment
Stainless steel bit holder contains powerful rare earth magnets for securing bits and fasteners
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Part #:KLE32476
- PHILLIPS, SLOTTED TYPE CHROME PLATED FINISH 7-3/4 INCH OVERALL LENGTH 4 INCH SHANK LENGTH HEAT TREATED PROCESS CUSHION GRIP HANDLE, PRECISION, 5-IN-1 STYLE BLACK/YELLOW HANDLE COLOR 3/16 INCH, 9/32 INCH (SLOTTED), #1, #2 (PHILLIPS), 5/16 INCH (NUTDRIVER) TIP SIZE TEMPERED STEEL SHANK MATERIAL TIP-IDENT[R] BRAND APPLICABLE STANDARD ASME/ANSI
Part #:KLE32557
- PHILIPS, SLOTTED, SQUARE RECESS SCREWDRIVER SET TYPE 10 PIECE(S) PLASTIC HANDLE MATERIAL BLACK HANDLE COLOR (1) 3/16 INCH, (1) 1/4 INCH SLOTTED, (1) #1, (1) #2 PHILLIPS/SQUARE RECESS SCREWDRIVER, (1) 3/8 INCH HEX DRIVER, (1) 1/4 INCH, (1) 5/16 INCH, (1) 3/8 INCH NUTDRIVER SET CONTENT KLEIN BRAND HANDLE TYPE CUSHION GRIP SHANK LENGTH 2-61/64 INCH LENGTH 7.9 INCH SHANK MATERIAL HEAT TREATED TEMPERED CHROME PLATED STEEL APPLICABLE STANDARD ASME/ANSI
Part #:KLE32559
- PHILLIPS, SLOTTED TYPE CHROME PLATED FINISH 9-7/64 INCH OVERALL LENGTH 4-7/64 INCH SHANK LENGTH HEAT TREATED, TEMPERED PROCESS PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE STYLE BLACK HANDLE COLOR 3/16 INCH, 1/4 INCH (SLOTTED), #1, #2 (PHILLIPS), 1/4 INCH, 5/16 INCH (NUTDRIVER) TIP SIZE STEEL SHANK MATERIAL KLEIN BRAND APPLICABLE STANDARD ASME/ANSI
Displaying: 1 - 23 of 23 Matching Items