Plastic-Handle Tapping Tools
Increases Job Speed by Combining Taps and Drivers in One Tool
View:
Part #:KLE32303
-
14-in-1 Multi-Bit Adjustable Length Screwdriver
32303
Multi-bit screwdriver includes 13 different screwdriver bits and a 1/4-Inch nut driver
Industrial-strength bits that are conveniently housed in the handle
Adjust the length of the blade for easier access
Impact rated blade can be removed for use as an impact driver attachment
Stainless steel bit holder contains powerful rare earth magnets for securing bits and fasteners
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Part #:KLE32305
-
15-in-1 Multi-Bit Ratcheting Screwdriver
32305
Multi-Bit screwdriver features a durable ratcheting mechanism for faster and easier all-day driving
On-board storage of 14 different double-sided screwdriver bits and a 1/4-Inch nut driver
Industrial-strength bits that are conveniently housed in the handle
Collar sets ratchet direction at forward, fixed and reverse
Cushion-Grip handle for great torque and maximum comfort
Spin cap for optimum and precise control
Includes Phillips (#0, #1, #2, #3), Slotted (3/16-Inch, 1/4-Inch), Square (#1, #2), Torx® (T10, T15, T20, T25), and Combo (#1, #2) bits
TORX® is a registered trademark of Acument Intellectual Properties, LLC
Part #:KLE32307
-
27-in-1 Multi-Bit Tamperproof Screwdriver
32307
Multi-Bit screwdriver features convenient on-board storage of 26 different tamperproof bits and a 1/4-Inch nut driver
Barrel contains powerful rare earth magnets for securing bits and fasteners
Industrial-strength, double-sided bits that are conveniently housed in the handle eliminating the need for a bulky bit block
Stainless steel barrel provides great impact and wear resistance
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Includes the following tamper-proof bits Torx®, TORQ-SET®, Hex, and Spanner
TORQ-SET® is a registered trademark of Phillips Screw Co TORX® is a registered trademark of Acument Intellectual Properties, LLC
Part #:KLE32308
-
8-in-1 Multi-Bit Adjustable Length Stubby Screwdriver
32308
Multi-bit stubby screwdriver includes 7 different screwdriver bits and a 1/4-Inch nut driver
Compact driver reaches easily into tight spots
Industrial-strength bits that are conveniently housed in the handle
Adjust the length of the blade for easier access
Impact rated blade can be removed for use as an impact driver attachment
Stainless steel bit holder contains powerful rare earth magnets for securing bits and fasteners
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Part #:KLE32476
- PHILLIPS, SLOTTED TYPE CHROME PLATED FINISH 7-3/4 INCH OVERALL LENGTH 4 INCH SHANK LENGTH HEAT TREATED PROCESS CUSHION GRIP HANDLE, PRECISION, 5-IN-1 STYLE BLACK/YELLOW HANDLE COLOR 3/16 INCH, 9/32 INCH (SLOTTED), #1, #2 (PHILLIPS), 5/16 INCH (NUTDRIVER) TIP SIZE TEMPERED STEEL SHANK MATERIAL TIP-IDENT[R] BRAND APPLICABLE STANDARD ASME/ANSI
Part #:KLE625-32
- TRIPLE TAP TOOL TYPE 7-1/8 INCH L SIZE RE-FORM BURRED THREAD INCLUSIONS/FEATURES TAP SIZE #6-32 TPI, #8-32 TPI, #10-32 TPI HANDLE COLOR ORANGE
Part #:MILBU5168-XTL-200-KK
- RINGLESS TYPE 14-1/8 INCH W X 4-1/2 INCH D X 32 INCH H SIZE 6 AWG TO 350 KCMIL (LINE) WIRE SIZE GALVANIZED STEEL ENCLOSURE MATERIAL UL APPROVAL 240 VAC VOLTAGE RATING SURFACE MOUNTING NEMA 3R ENCLOSURE 200 AMPERE CURRENT RATING 1-PHASE 3-WIRE CIRCUIT CONFIGURATION OVERHEAD/UNDERGROUND SERVICE TYPE 8 CIRCUIT(S) CLOSING PLATE HUB TYPE (1) (1/4 INCH - 1/2 INCH), (4) (1/2 INCH - 3/4 INCH), (2) (1/2 INCH - 3/4 INCH - 1 INCH), (3) (3/4 INCH - 1 INCH - 1-1/4 INCH - 1-1/2 INCH - 2 INCH), (1) (1 INCH - 1-1/4 INCH - 1-1/2 INCH - 2 INCH - 2-1/2 INCH), (1) (1-1/4 INCH - 1-1/2 INCH - 2 INCH - 2-1/2 INCH - 3 INCH) CONCENTRIC KNOCKOUT KNOCKOUT(S) 4 JAW(S) HORN BYPASS SWITCH 22 KILOAMPERE INTERRUPTING RATING CIRCUIT BREAKER MAIN DISCONNECT TYPE U5168 MODEL
$
356.30
Part #:MILU7021-RL-TG-KK-RGE
- 200 AMP O/H AND UNDERGROUND RESIDENTIAL WITH TEST TABS:
$
99.52
Part #:MIDWR101CB2
- METERED RINGLESS TYPE G90 GALVANIZED STEEL MATERIAL ZINC COATED FINISH 1 AWG TO 300 KCMIL STRANDED (COPPER/ALUMINUM, LOAD CB BASE), 1 AWG TO 300 KCMIL STRANDED (COPPER/ALUMINUM, NEUTRAL LG SINGLE LUGS), 14 TO 8 AWG SOLID/14 TO 1/0 AWG STRANDED (COPPER, NEUTRAL SMALL SINGLE HOLES), 12 TO 8 AWG SOLID/12 TO 1/0 AWG STRANDED (ALUMINUM, NEUTRAL SMALL SINGLE HOLE), 14 TO 8 AWG SOLID/10 TO 4 AWG STRANDED (COPPER, NEUTRAL SIX LARGE HOLE), 6 TO 4 AWG STRANDED (ALUMINUM, NEUTRAL SIX LARGE HOLE), 14 TO 8 AWG SOLID/12 TO 8 AWG STRANDED (COPPER, NEUTRAL SMALL HOLE), 12 TO 8 AWG SOLID/STRANDED (ALUMINUM, NEUTRAL SMALL HOLE), 12 TO 8 AWG SOLID/12 TO 2 AWG STRANDED (COPPER/ALUMINUM, GROUND) WIRE SIZE UL APPROVAL NEMA 3R ENCLOSURE 100 AMPERE CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION CB2100 FIRST POSITION CIRCUIT BREAKER TYPE APPLICABLE STANDARD NEMA, NEC VOLTAGE RATING 120/240 V CABINET DIMENSION 14-3/4 INCH W X 4-9/16 INCH D X 26-1/4 INCH H MOUNTING SURFACE
$
385.72
Part #:MIDWR208CR2A
- National Electric Code requires electrical distribution equipment to be rated as Service Entrance, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading.
$
633.96
Part #:MIDWR281CB1
- METERED RINGLESS TYPE G90 GALVANIZED STEEL MATERIAL ZINC COATED FINISH 6 TO 350 KCMIL STRANDED (COPPER/ALUMINUM, LINE METER SOCKET), 1 TO 4 AWG STRANDED (COPPER/ALUMINUM, LOAD BASE LUG/NEUTRAL A), 6 TO 2/0 AWG STRANDED (COPPER/ALUMINUM, NEUTRAL/GROUND B), 14 TO 8 AWG SOLID/14 TO 4 AWG STRANDED (COPPER, NEUTRAL/GROUND C), 12 WIRE SIZE UL APPROVAL NEMA 3R ENCLOSURE 200 AMP CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION CB4200H FIRST POSITION CIRCUIT BREAKER TYPE MIDWEST ELECTRIC BRAND VOLTAGE RATING 120/240 VOLT CABINET DIMENSION 14-3/8 INCH WIDTH X 4-3/4 INCH DEPTH X 28-5/8 INCH HEIGHT MOUNTING TYPE SURFACE APPLICABLE STANDARD NEMA, NEC
$
302.92
Part #:MIDWR281C1P6H
- National Electric Code requires electrical distribution equipment to be rated as Service Entrance, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading.
$
842.70
Part #:MILBU2161-XT
- 13 TERM RNGLS 2 LRG CLS PLTS TEST SW PROV 24IN-34IN-12IN PNTD STL SGL FRONT LIFT OFF SCR CVR HSP
$
9,215.30
$
783.11
Part #:MILU7421-RL
- RINGLESS TYPE 10 INCH W X 4-7/8 INCH D X 18-1/2 INCH H SIZE 6 AWG TO 350 KCMIL (LINE/LOAD, ALUMINUM/COPPER) WIRE SIZE UL 414 APPROVAL 600 VAC VOLTAGE RATING NEMA 3R ENCLOSURE 200 AMPERE CURRENT RATING 3 PHASE 4 WIRE CIRCUIT CONFIGURATION OVERHEAD SERVICE TYPE TRIPLEX NEUTRAL NEUTRAL TYPE SMALL OPENING HUB TYPE (1) (1/4-INCH-1/2 INCH) CONCENTRIC KNOCKOUT, (2) 3/4 INCH CONCENTRIC KNOCKOUT, (1) 2 1/2 INCH CONCENTRIC KNOCKOUT, (2) 3 INCH CONCENTRIC KNOCKOUT KNOCKOUT(S) 7 JAW(S) LEVER BYPASS SWITCH APPLICABLE STANDARD ANSI C12.7
$
490.66
Part #:MILU7487-RL-TG-KK
- RINGLESS TYPE 8 INCH W X 3-5/16 INCH D X 11-1/2 INCH H SIZE 6 TO 2/0 AWG (LINE/LOAD, ALUMINUM/COPPER) WIRE SIZE UL 414 APPROVAL 600 VAC VOLTAGE RATING NEMA 3R ENCLOSURE 125 AMPERE CURRENT RATING OVERHEAD/UNDERGROUND SERVICE TYPE TRIPLEX NEUTRAL NEUTRAL TYPE SMALL OPENING HUB TYPE (1) 1/4 INCH CONCENTRIC KNOCKOUT, (2) 1 1/4 INCH CONCENTRIC KNOCKOUT, (2) 1 1/2 INCH CONCENTRIC KNOCKOUT, (1) 2 INCH CONCENTRIC KNOCKOUT KNOCKOUT(S) 4 JAW(S) HORN BYPASS SWITCH APPLICABLE STANDARD ANSI C12.7
$
91.74
$
138.98
$
630.62
Part #:MILBU9701-RRL-BLG
- 7 TERM RNGLS LRG HUB OPEN ADAPT TO SML HUB OPEN 7-8 IN BRL LCK GRD WITH BRKT PROV LVR BYPS
$
617.48
Part #:MILU7040-RL-TG-KK-RGE
- RINGLESS TYPE 11 INCH W X 4 1/8 INCH D X 15 1/2 INCH H SIZE 6 AWG TO 350 KCMIL (LINE), 6 AWG TO 350 KCMIL (LOAD) WIRE SIZE UL APPROVAL 200 AMPERE CURRENT RATING OVERHEAD/UNDERGROUND SERVICE TYPE (1) 1/4 INCH, (1) (1/4 INCH-1/2 INCH) CONCENTRIC KNOCKOUT, (4) 2 1/2 INCH KNOCKOUT(S) 4 JAW(S) HORN BYPASS SWITCH MILBANK[R] BRAND
$
76.99
Qty:
Displaying: 1 - 24 of 31 Matching Items