KIDDE
ILSCO CORPORATION
View:
Active Filters :
- Mfr / Trade Name: ILSCO CORPORATION KIDDE RAB Tork WESTINGHOUSE LIGHTING / ANGELO
Sold Out
Sold Out
Sold Out
Sold Out
Sold Out
Part #:RABPS4-11-20D2
- SQUARE STRAIGHT TYPE 20 FT NOMINAL MOUNTING HEIGH UL (CANADA AND US), CSA APPROVAL WET LOCATION APPLICATION 3/4 INCH DIA X 17 INCH L X 3 INCH THD BOLT SIZE STEEL SHAFT MATERIAL 8-1/2 INCH BOLT CIRCLE DIAMETER 2 FIXTURE(S) DRILL FIXTURE MOUNTING TYPE 3 INCH W X 5 INCH H HAND HOLE TYPE 240 LB AT 70 MPH, 165 LB AT 80 MPH, 75 LB AT 100 MPH, 110 LB AT 90 MPH, 45 LB AT 110 MPH, 20 LB AT 120 MPH ARM CAPACITY 8.3 SQ FT AT 70 MPH, 5.6 SQ FT AT 80 MPH, 3.6 SQ FT AT 90 MPH, 2.2 SQ FT AT 100 MPH, 1 SQ FT AT 110 MPH, 0.2 SQ FT AT 120 MPH EFFECTIVE PROJECTED AREA SQUARE BASE SHAFT MOUNTING TYPE 4 INCH SHAFT BOTTOM SIZE BRONZE SHAFT COLOR POLYESTER POWDER COATED SHAFT FINISH 4 INCH SHAFT TOP SIZE 1/8 INCH SHAFT WALL THICKNESS 70/80/90/100/110/120 MPH WIND LOAD RATING 8 INCH L X 8 INCH W X 3/4 INCH THK MOUNTING BASE SIZE INCLUDES GALVANIZED ANCHOR BOLT, GALVANIZED HARDWARE, ANCHOR BOLT TEMPLATE PS4 MODEL
$
895.67
Qty:
Part #:RABFFLED39W
- 11 INCH W X 7-1/2 INCH D X 10 INCH H SIZE CHIP AND FADE RESISTANT WHITE POLYESTER POWDER COATED FINISH UL, UL (CANADA AND US) APPROVAL 1/2 INCH THREADED ARM, O-RING, STAINLESS STEEL SCREW MOUNTING IP65 ENCLOSURE LED LAMP TYPE (1) 13 W, (1) 26 W LAMP WATTAGE PRECISION DIE-CAST ALUMINUM HOUSING MATERIAL 100 TO 277 VAC AT 50/60 HZ LAMP/BALLAST VOLTAGE NEMA 7 X 6 DISTRIBUTION/BEAM SPREAD 0.65 SQ FT EPA LFLOOD[R] BRAND APPLICATION WET LOCATION INITIAL INTENSITY 4596 LUMEN COLOR RENDERING INDEX 65 COLOR TEMPERATURE IN KELVIN 5000 (COOL) DRIVER INPUT WATTAGE 41 W REFLECTOR ANODIZED SEMI SPECULAR ALUMINUM WITH BUTTON PHOTOCELL WIRED FOR 120 V FFLED MODEL
$
250.16
Qty:
Part #:RABLFLED5YW
*LIMITED SUPPLY*
- 2-3/8 INCH DIA X 6 INCH L SIZE CHIP AND FADE RESISTANT WHITE POLYESTER POWDER COATED FINISH UL, UL (CANADA AND US) APPROVAL ARM MOUNTING LED LAMP TYPE 5 W LAMP WATTAGE PRECISION DIE-CAST ALUMINUM HOUSING MATERIAL 100 TO 240 VAC AT 50/60 HZ LAMP/BALLAST VOLTAGE NEMA 4 X 4, 44 DEGREE DISTRIBUTION/BEAM SPREAD LFLOOD[R] BRAND ROHS COMPLIANT APPLICATION WET LOCATION INITIAL INTENSITY 208 LUMEN COLOR RENDERING INDEX 86 COLOR TEMPERATURE IN KELVIN 3000 (WARM) DRIVER INPUT WATTAGE 5 W LENS MATERIAL MICROPRISMATIC DIFFUSION LFLED MODEL
Sold Out
$
476.02
Qty:
$
192.92
Qty:
Part #:RABALED4T150
- BRONZE POLYESTER POWDER COATED FINISH UL APPROVAL ARM MOUNTING LED LAMP TYPE 150 W LAMP WATTAGE DIE-CAST ALUMINUM HOUSING MATERIAL 120/208/240/277 V AT 50/60 HZ LAMP/BALLAST VOLTAGE TYPE 4 DISTRIBUTION/BEAM SPREAD SIZE 23.4 INCH L X 15 INCH W X 4.5 INCH H INITIAL INTENSITY 14349 LUMEN COLOR RENDERING INDEX 65 COLOR TEMPERATURE IN KELVIN 5000 (COOL) EFFECTIVE PROJECTED AREA 0.75 SQ FT ALED MODEL
$
880.02
Qty:
$
927.16
Qty:
$
190.80
Qty:
$
380.11
Qty:
Part #:RABHNLED26A
- 5-1/2 INCH DIA X 9-1/4 INCH D SIZE BRONZE POLYESTER POWDER COATED FINISH UL APPROVAL ARM, O-RING, STAINLESS STEEL SCREW MOUNTING LED LAMP TYPE 26 W LAMP WATTAGE DIE-CAST ALUMINUM HOUSING MATERIAL 120/208/240/277 V AT 50/60 HZ LAMP/BALLAST VOLTAGE NEMA 2 X 2 HORIZONTAL/VERTICAL DISTRIBUTION/BEAM SPREAD ROHS COMPLIANT DRIVER INPUT POWER 27 W LAMP INTENSITY 2272 LUMEN COLOR RENDERING INDEX 67 COLOR TEMPERATURE 5000 K LAMP LIFE 100000 HR GASKET MATERIAL HIGH TEMPERATURE SILICONE REFLECTOR MATERIAL SEMI-SPECULAR VACUUM-METALIZED POLYCARBONATE AMBIEN
$
379.98
Qty:
$
345.00
Qty:
$
95.63
Qty:
Part #:KIDI9040E
- The Fire Sentry i9040 smoke alarm is a battery operated smoke alarm that utilizes ionization sensing technology. The four (4) inch unit is smaller in diameter giving it discreet design with the same quality you would expect in a Kidde manufactured product. The i9040 is powered by a 9V battery, providing continuous protection, even during power outages. This easy to install unit includes a test button to verify the detection electronics are working as intended.
Benefits
The Fire Sentry i9040 battery operated, single station smoke alarm provides an early warning signal to you and your family in the event of a fire hazard. The i9040 operates on a 9V battery power source that provided continuous protection even during a power outage, Installation is easy, no wiring required. This unit is UL Listed and includes a 3 year limited warranty.
This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Battery Operated (9V Battery Included) &ndash Easy installation and provides continuous protection even during power outages.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
Low Battery Indicator &ndash Low battery warning chirp alerts user to change battery.
Discreet Design &ndash Four (4) inch diameter.
Technical Specifications
Model Number
i9040
Power Source
9V Battery (included)
Audio Alarm
85dB at 10ft
Temperature Range
40F to 100F (4°C to 38°C)
Humidity Range
up to 85% relative humidity (RH)
Sensor
Ionization
Size
4&rdquo in diameter x 1.45&rdquo depth
Weight
.5lbs
Interconnects
No
Warranty
3 year limited
$
8.13
Qty:
Part #:KIDI9050
- The Kidde i9050 is a full size, ionization, battery operated smoke alarm designed to protect you and your family from the dangers of smoke and fire. The i9050 is powered by a 9V battery, providing continuous protection even during power outages. This unit includes a flashing red LED to indicate the alarm is receiving power. The i9050 is UL Listed and includes a 10 year limited warranty.
Benefits
The Kidde i9050 basic, battery operated smoke alarm provides you and your family an early warning signal against the dangers of fire and smoke. This easy to install smoke alarm includes a test button to verify the unit&rsquos electronic circuitry, horn and battery function are work properly. The i9050 also includes a tamper resist feature to help deter theft or tampering. This smoke alarm is powered by a 9V battery and is suitable for all living areas. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation &ndash No wiring required.
Battery Operated (9V battery included) &ndash Provides continuous protection even during power failures.
Quality Design &ndash 10 year limited warranty.
Flashing LED &ndash Indicates alarm is receiving power.
Test Button &ndash Verifies battery and alarm operation.
Low Battery Indicator &ndash Chirps when battery needs replacement.
Technical Specifications
Model
i9050
Power Source
9V Battery (included)
Audio Alarm
85dB at 10ft
Temperature Range
40F to 100F (4C to 38C)
Humidity Range
up to 85% relative humidity (RH)
Sensor
Ionization
Size
5&rdquo in diameter x 1.75&rdquo depth
Weight
.62lbs
Interconnects
No
LED
Red, normal operation
Warranty
10 year limited warranty
$
9.22
PK
Qty:
Part #:KIDHD135F
-
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke.
The Kidde HD135F 120VAC wire in heat alarm gives you and your family an early warning to dangerous temperatures of 135F or more
This unit also includes a tamper resist pin that helps to deter thief and tampering.
This unit can be used as a single station unit or it can be interconnected to up to 24 Kidde devices in a multiple station arrangement
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke. The alarm will sound if temperatures rise above 135F. The Kidde HD135F is interconnectable. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices (Smoke, heat, CO, etc) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. This unit includes a 5-year limited warranty and is UL Listed.
Interconnectable &ndash Interconnects with up to 24 Kidde devices of which 18 can be initiating.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
9V Battery Back Up &ndash Provides continuous protection even during power outages.
Red LED &ndash Flashes every 30-40 seconds to indicate proper operation.
Low Battery Indicator &ndash Alerts user in the event of alow or missing battery.
Quick Connect Power Harness &ndash Makes installation fast and easy.
Technical Specifications
Model
HD135F
UPC Number
0-25417-84135-0
Power Source
120VAC, 60HZ, 9V battery backup
Sensor
Heat
Audio Alarm
85dB at 10ft
Temperature Range
-20F to +100F (-29C and +38C)
Humidity Range
5%-95% relative humidity (RH)
Size
5&rdquo in diameter x 2&rdquo depth
Weight
.75lbs
Interconnects
Up to 24 Kidde devices of which 18 can be initiating devices.
LED
Green, AC power present, alarm mode flashing Red indicates originating unit
Warranty
5 year limited warranty
$
34.89
Qty:
Part #:ANGE7728500
- 3-WAY CONTACT CONFIGURATION UL, CSA APPROVAL CEILING FAN APPLICATION 125/250 VAC VOLTAGE RATING 3 AMPERE AT 250 VAC, 6 AMPERE AT 125 VAC CURRENT RATING BRASS ACTUATOR FINISH CORD SIZE 2 FT INCLUDES BRAIDED CORD
$
3.96
Qty:
Part #:KIDSM120X
- 60 HZ FREQUENCY RATING 120 VAC VOLTAGE RATING
$
8.54
Qty:
Part #:KIDKN-COSM-BA
- Description
The Kidde KN-COSM-BA Combination Carbon Monoxide & Smoke Alarm provides two important safety devices in a single unit. This alarm includes a voice warning system that announces &ldquoFire, Carbon Monoxide, Low Battery and Smart HushTM Activation.&rdquo The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This technologically advanced combination alarm is battery operated protecting you and your family even during a power outage when many incidences occur.
The KN-COSM-BA is an easy to install alarm that is suitable for all living areas and has a 10-year life and a 5-year limited warranty. This alarm uses ionization sensing technology. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms.
Alarm Warnings
Fire
The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message &ldquoFIRE!&rdquo. The alarm pattern will repeat until smoke is eliminated.
Carbon Monoxide
Four short alarm beeps followed by a verbal warning &ldquoWARNING! CARBON MONOXIDE!&rdquo This continues until the unit is reset or the CO is eliminated.
Low Battery
If any form of battery failure is detected the red LED light will flash and the unit will &ldquochirp&rdquo once every 60 seconds for at least 7 days. The &ldquoLOW BATTERY&rdquo voice occurs once every 15 minutes. The green LED will also be flashing twice per second.
Voice Hush Indication
&ldquoHUSH MODE ACTIVATED&rdquo and &ldquoHUSH MODE CANCELLED&rdquo voice announcement.
Peak Level Memory
If the alarm had detected a CO level of 100ppm or higher, the unit will announce &ldquoCARBON MONOXIDE PREVIOUSLY DETECTED&rdquo to warn of the CO incident, when the Test/ Reset button is pressed.
Voice Alarm &ndashAnnounces the hazard type detected thereby helping to speed up the correct reaction to the hazard detected. Alarm announces &ldquoFire!&rdquo when a smoke or fire hazard is detected and announces &ldquoWarning Carbon Monoxide&rdquo when a CO hazard is detected.
Combined Carbon Monoxide and Smoke Alarm &ndash A single unit can be installed where previously, two were needed. Reduces installation time and helps to keep home décor attractive.
Test/Reset Button &ndash Tests alarm circuitry and triggers the voice announcement.
LEDs &ndash Flashing green for normal operation and flashing red for alarm condition.
Low Battery Warning &ndash The unit warns of a low battery condition by announcing &ldquolow battery&rdquo and by initiating an alarm chirp and activating a flashing red LED.
Battery Powered &ndash Provides protection even during power outages when many fire and carbon monoxide incidents occur.
Battery Safeguard &ndash The battery door will not close unless the batteries are properly installed.
Hush® Feature &ndash Temporarily silences nuisance alarms.
Ionization Smoke Alarm Sensor
Technical Specifications
Model
KN-COSM-BA
Power Source
2 AA Battery
Sensor
Smoke Ionization, CO Electrochemical
Audio Alarm
85dB at 10ft
Temperature Range
40F (4.4C) to 100F (37.8C)
Humidity Range
10%-95% relative humidity non-condensing
Size
5.6&rdquo in diameter x 1.8&rdquo depth
Weight
13oz
Interconnects
No
$
50.49
Qty:
Displaying: 1 - 24 of 159 Matching Items