L.H. DOTTIE CO.
CRC Industries
View:
Active Filters :
- Mfr / Trade Name: CRC Industries L.H. DOTTIE CO. s.e.s. Sylvania Lamps
$
10.80
Qty:
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
$
10.08
Qty:
$
10.98
Qty:
Part #:DOTPFP50
- PISTON TYPE DURABLE FOAM MATERIAL 1/2 INCH CONDUIT SIZE PULLING EYES MATERIAL METAL FITS MOST CONDUITS 1/2 TO 6 INCH PFP MODEL
$
4.24
Qty:
Part #:CRC02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3 HECTOPASCAL VAPOR DENSITY GREATER THAN 1 (AIR EQUAL TO 1) VOC CONTENT 649.9 GPL OVERALL DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF H1
$
12.91
Qty:
Part #:CRC14050
- AEROSOL CONTAINER TYPE TAPPING, THREADING, DRILLING, SAWING, SHEARING, TURNING, REAMING ITEM TYPE 300 DEG F TEMPERATURE RANGE 16 OUNCE CONTAINER SIZE PHYSICAL STATE LIQUID COLOR BROWN BASE TYPE PETROLEUM VOC CONTENT 184.8 GALLON PER LITER MELTING POINT -40 DEG F FLASH POINT 300 DEG F NET FILL 12 OUNCE UNIT DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF P1
$
12.57
Qty:
Part #:CRC14077
- POLYURETHANE TYPE TAN COLOR UL APPLICABLE STANDARD FILLING, INSULATING, SEALING, BONDING, HVAC, ELECTRICAL, INDUSTRIAL, PLUMBING, AROUND ELECTRICAL OUTLET, UTILITY PANEL, DUCT, PIPE, DOOR, WINDOW, BASE PLATE, JOINT, CRACK, CRAWLSPACE, FOUNDATION, SPOT INSULATING, TOUCH-UP APPLICATION -200 TO 200 DEG F TEMPERATURE RATING AEROSOL CAN CONTAINER TYPE 16 OUNCE CONTAINER CAPACITY 12 TO 24 HOUR (CURE TIME) SETTING TIME ROHS COMPLIANT OVERALL DIMENSION 2.19 INCH WIDTH X 2.19 INCH DEPTH X 8.06 INCH HEIGHT SPECIFIC GRAVITY 1.2 VOC CONTENT 35 GRAM PER LITER NET FILL 12 OUNCE
$
16.54
Qty:
Part #:CRC18414
- CORROSION TYPE GRAY COLOR THREAD, EXPOSED EDGE, FASTENER, CONDUIT, STRAPPING, WELD, FENCING, RAILING, GRATE, ELECTRICAL POLE, BREAKER PANEL HOUSING, RAIN SPOUT, SIGN, DOOR, TRAILER, WASTE CONTAINER, CATWALK, GUARD RAIL APPLICATION AEROSOL, BOTTLE CONTAINER TYPE 13 OUNCE CONTAINER SIZE 15 TO 30 MINUTE DRYING TIME BRIGHT ZINC-IT[R] BRAND OVERALL DIMENSION 5.62 INCH WIDTH X 11.31 INCH DEPTH X 8.68 INCH HEIGHT
$
16.58
Qty:
Part #:SBLW12
- SPLIT TYPE SILICON BRONZE MATERIAL 1/2 INCH FASTENER SIZE PC 4015 MODEL
$
113.52
Qty:
Part #:DOTD151
- PHILIPS, SLOTTED, SQUARE, STAR, HEX TYPE 15 PIECE(S) GREEN HANDLE COLOR #0 AND #3, #1 AND #2 PHILLIPS, #0 AND #3, #1 AND #2 SQUARE, T10 AND T15, T20 AND T25 STAR, #4 AND #6 SLOTTED BITS, 1/4 INCH HEX SET CONTENT
$
22.96
Qty:
Part #:TAPCON316X114
- CERAMIC COATED BLUE FINISH 1-1/4 INCH ANCHOR LENGTH 1-1/4 INCH SCREW LENGTH 3/16 INCH SCREW SIZE 5/32 INCH DRILL SIZE SLOTTED HEX HEAD TYPE 3/16 INCH ANCHOR SIZE APPLICATION CONCRETE ANCHORING SYSTEM INCLUDES DRILL
$
0.22
Qty:
Part #:TAPCON316X314
- STEEL MATERIAL CERAMIC COATED BLUE FINISH 1-3/4 INCH ANCHOR LENGTH 5/32 INCH X 3-1/2 INCH DRILL SIZE HEX HEAD TYPE 3/16 INCH DIA ANCHOR SIZE BIT SIZE 1/4 INCH DRIVE TYPE SLOTTED APPLICATION CONCRETE INCLUDES DRILL
$
0.49
Qty:
Part #:TAPCON316X214
- STEEL MATERIAL CERAMIC COATED BLUE FINISH 2-1/4 INCH ANCHOR LENGTH 5/32 INCH X 4-1/2 INCH DRILL SIZE HEX HEAD TYPE 3/16 INCH DIA ANCHOR SIZE BIT SIZE 1/4 INCH DRIVE TYPE SLOTTED APPLICATION CONCRETE INCLUDES DRILL
$
0.32
Qty:
Part #:TAPCON316X234
- STEEL MATERIAL CERAMIC COATED BLUE FINISH 2-3/4 INCH ANCHOR LENGTH 5/32 INCH X 4-1/2 INCH DRILL SIZE HEX HEAD TYPE 3/16 INCH DIA ANCHOR SIZE BIT SIZE 1/4 INCH DRIVE TYPE SLOTTED APPLICATION CONCRETE INCLUDES DRILL
$
0.34
Qty:
Part #:DOTSDS36814
- ROTARY HAMMER TYPE TUNGSTEN CARBIDE TIPPED MATERIAL 8-1/4 INCH OVERALL LENGTH 6 INCH DRILLING LENGTH SDS 4 PLUS SHANK TYPE 6 FLUTE(S) SPIRAL FLUTE TYPE 3/16 INCH DRILL SIZE APPLICATION CONCRETE, MASONRY, BRICK, STONE SDS MODEL
$
10.48
Qty:
Part #:SELFWSAEK
- FLAT WASHER TYPE BOX PACKAGING TYPE (120) #8, (120) #10, (60) 1/4 INCH, (30) 5/16 INCH, (85) 3/8, (6) 1/2 INCH FLAT WASHER SET ITEMS MATERIAL STEEL FINISH ZINC PLATED FW MODEL
$
21.34
Qty:
Part #:SELAKDEK
- WOOD ROCKET TYPE BOX PACKAGING TYPE (80) #6 X 1 INCH, (70) #6 X 1-1/8 INCH, (65) #6 X 1-1/4 INCH, (45) #6 X 1-5/8 INCH, (40) #6 X 2 INCH, (35) #6 X 2-1/4 INCH WOOD ROCKET SET ITEMS MATERIAL ZINC PLATED STEEL SERIES WR MODEL
$
17.76
Qty:
Part #:FENW316X114
- STEEL MATERIAL ZINC PLATED FINISH 3/16 INCH INNER DIAMETER 1-1/4 INCH OUTER DIAMETER APPLICATION GENERAL PURPOSE, LARGE LOAD BEARING SURFACE SERIES FENW MODEL
$
24.76
Qty:
Part #:FENW14X1
- STEEL MATERIAL ZINC PLATED FINISH 1/4 INCH INNER DIAMETER 1 INCH OUTER DIAMETER PC 4110 MODEL
$
17.16
Per Hundred
Qty:
Part #:SELFENW14X114
- STEEL MATERIAL ZINC PLATED FINISH 1/4 INCH INNER DIAMETER 1-1/4 INCH OUTER DIAMETER PC 4110 MODEL
$
24.60
Qty:
Part #:FENW14X112
- STEEL MATERIAL ZINC PLATED FINISH 1/4 INCH INNER DIAMETER 1-1/2 INCH OUTER DIAMETER PC 4110 MODEL
$
38.26
Per Hundred
Qty:
Part #:FENW14X2
- STEEL MATERIAL ZINC PLATED FINISH 1/4 INCH INNER DIAMETER 2 INCH OUTER DIAMETER FENW MODEL
$
62.18
Qty:
Displaying: 1 - 24 of 209 Matching Items