L.H. DOTTIE CO.
Gardner-Bender
View:
Active Filters :
- Mfr / Trade Name: Gardner-Bender L.H. DOTTIE CO. s.e.s. Sylvania Lamps
$
10.80
Qty:
Part #:SMI100-AC
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
14.91
Qty:
Part #:SMICO100-AC
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
61.28
Qty:
Part #:G-BGSW-120
- BAT HANDLE TYPE 0.57 INCH W X 1.13 INCH H SIZE 0.65 INCH TOGGLE LENGTH SPDT CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF/MAINTAINED ON OPERATION TYPE UL, CSA APPROVAL FOOD SERVICE EQUIPMENT, INDUSTRIAL EQUIPMENT APPLICATION 125/277 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.5 INCH L BUSHING MOUNTING 20 AMPERE AT 125 VAC, 10 AMPERE AT 277 VAC CURRENT RATING BLACK PHENOLIC PLASTIC BODY MATERIAL SPADE TERMINAL TYPE BRASS/BRIGHT NICKEL TOGGLE MATERIAL GB[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC ZINC CHROMATED STEEL FRAME, SUPPORT GSW MODEL
$
4.60
CG
Qty:
$
10.08
Qty:
$
10.98
Qty:
Part #:DOTPFP50
- PISTON TYPE DURABLE FOAM MATERIAL 1/2 INCH CONDUIT SIZE PULLING EYES MATERIAL METAL FITS MOST CONDUITS 1/2 TO 6 INCH PFP MODEL
$
4.24
Qty:
$
9.38
Qty:
Part #:SHOOK112
- OPEN END TYPE STEEL MATERIAL ZINC PLATED FINISH 1-1/2 INCH OVERALL LENGTH 7/16 INCH INSIDE DIAMETER 7 GAUGE WIRE DIAMETER OPEN WIDTH 1/4 INCH
$
0.40
Qty:
$
28.43
Qty:
Part #:SBLW12
- SPLIT TYPE SILICON BRONZE MATERIAL 1/2 INCH FASTENER SIZE PC 4015 MODEL
$
113.52
Qty:
Part #:DOTD151
- PHILIPS, SLOTTED, SQUARE, STAR, HEX TYPE 15 PIECE(S) GREEN HANDLE COLOR #0 AND #3, #1 AND #2 PHILLIPS, #0 AND #3, #1 AND #2 SQUARE, T10 AND T15, T20 AND T25 STAR, #4 AND #6 SLOTTED BITS, 1/4 INCH HEX SET CONTENT
$
22.96
Qty:
Part #:TAPCON316X114
- CERAMIC COATED BLUE FINISH 1-1/4 INCH ANCHOR LENGTH 1-1/4 INCH SCREW LENGTH 3/16 INCH SCREW SIZE 5/32 INCH DRILL SIZE SLOTTED HEX HEAD TYPE 3/16 INCH ANCHOR SIZE APPLICATION CONCRETE ANCHORING SYSTEM INCLUDES DRILL
$
0.22
Qty:
Part #:TAPCON316X314
- STEEL MATERIAL CERAMIC COATED BLUE FINISH 1-3/4 INCH ANCHOR LENGTH 5/32 INCH X 3-1/2 INCH DRILL SIZE HEX HEAD TYPE 3/16 INCH DIA ANCHOR SIZE BIT SIZE 1/4 INCH DRIVE TYPE SLOTTED APPLICATION CONCRETE INCLUDES DRILL
$
0.49
Qty:
Part #:TAPCON316X214
- STEEL MATERIAL CERAMIC COATED BLUE FINISH 2-1/4 INCH ANCHOR LENGTH 5/32 INCH X 4-1/2 INCH DRILL SIZE HEX HEAD TYPE 3/16 INCH DIA ANCHOR SIZE BIT SIZE 1/4 INCH DRIVE TYPE SLOTTED APPLICATION CONCRETE INCLUDES DRILL
$
0.32
Qty:
Part #:TAPCON316X234
- STEEL MATERIAL CERAMIC COATED BLUE FINISH 2-3/4 INCH ANCHOR LENGTH 5/32 INCH X 4-1/2 INCH DRILL SIZE HEX HEAD TYPE 3/16 INCH DIA ANCHOR SIZE BIT SIZE 1/4 INCH DRIVE TYPE SLOTTED APPLICATION CONCRETE INCLUDES DRILL
$
0.34
Qty:
Part #:DOTSDS36814
- ROTARY HAMMER TYPE TUNGSTEN CARBIDE TIPPED MATERIAL 8-1/4 INCH OVERALL LENGTH 6 INCH DRILLING LENGTH SDS 4 PLUS SHANK TYPE 6 FLUTE(S) SPIRAL FLUTE TYPE 3/16 INCH DRILL SIZE APPLICATION CONCRETE, MASONRY, BRICK, STONE SDS MODEL
$
10.48
Qty:
Part #:SELFWSAEK
- FLAT WASHER TYPE BOX PACKAGING TYPE (120) #8, (120) #10, (60) 1/4 INCH, (30) 5/16 INCH, (85) 3/8, (6) 1/2 INCH FLAT WASHER SET ITEMS MATERIAL STEEL FINISH ZINC PLATED FW MODEL
$
21.34
Qty:
Part #:SELAKDEK
- WOOD ROCKET TYPE BOX PACKAGING TYPE (80) #6 X 1 INCH, (70) #6 X 1-1/8 INCH, (65) #6 X 1-1/4 INCH, (45) #6 X 1-5/8 INCH, (40) #6 X 2 INCH, (35) #6 X 2-1/4 INCH WOOD ROCKET SET ITEMS MATERIAL ZINC PLATED STEEL SERIES WR MODEL
$
17.76
Qty:
Part #:FENW316X114
- STEEL MATERIAL ZINC PLATED FINISH 3/16 INCH INNER DIAMETER 1-1/4 INCH OUTER DIAMETER APPLICATION GENERAL PURPOSE, LARGE LOAD BEARING SURFACE SERIES FENW MODEL
$
24.76
Qty:
Part #:FENW14X1
- STEEL MATERIAL ZINC PLATED FINISH 1/4 INCH INNER DIAMETER 1 INCH OUTER DIAMETER PC 4110 MODEL
$
17.16
Per Hundred
Qty:
Part #:SELFENW14X114
- STEEL MATERIAL ZINC PLATED FINISH 1/4 INCH INNER DIAMETER 1-1/4 INCH OUTER DIAMETER PC 4110 MODEL
$
24.60
Qty:
Part #:FENW14X112
- STEEL MATERIAL ZINC PLATED FINISH 1/4 INCH INNER DIAMETER 1-1/2 INCH OUTER DIAMETER PC 4110 MODEL
$
38.26
Per Hundred
Qty:
Part #:FENW14X2
- STEEL MATERIAL ZINC PLATED FINISH 1/4 INCH INNER DIAMETER 2 INCH OUTER DIAMETER FENW MODEL
$
62.18
Qty:
Displaying: 1 - 24 of 206 Matching Items