s.e.s.
MARLEY ENGINEERED PRODUCTS
View:
Active Filters :
- Mfr / Trade Name: MARLEY ENGINEERED PRODUCTS s.e.s. THOMAS & BETTS Tiffin
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:MARL2542NW
- SLIM TYPE STEEL MATERIAL 2 FT 6 3/4 INCH 1 PHASE(S) UL (CANADA AND US) APPROVAL COMMERCIAL, INDUSTRIAL, INSTITUTIONAL, RESIDENTIAL APPLICATION 240/208 V VOLTAGE RATING WALL MOUNTING 400 W POWER RATING TAMPER PROOF THERMOSTAT CONTROL TYPE 1365 BTU/HR HEATING CAPACITY ALUMINUM FINNED SHEATHED STEEL, NICKEL CHROMIUM ALLOY HEATING ELEMENT 250 W/FT WATT DENSITY BERKO[R] BRAND DEPTH 2 7/8 INCH 2500 MODEL
$
50.45
Qty:
Part #:MARL2543NW
- SLIM TYPE STEEL MATERIAL 3 FT 6 3/4 INCH 1 PHASE(S) UL (CANADA AND US) APPROVAL COMMERCIAL, INDUSTRIAL, INSTITUTIONAL, RESIDENTIAL APPLICATION 240/208 V VOLTAGE RATING WALL MOUNTING 750 W POWER RATING TAMPER PROOF THERMOSTAT CONTROL TYPE 3412 BTU/HR HEATING CAPACITY ALUMINUM FINNED SHEATHED STEEL, NICKEL CHROMIUM ALLOY HEATING ELEMENT 250 W/FT WATT DENSITY BERKO[R] BRAND DEPTH 2 7/8 INCH 2500 MODEL
$
64.18
Qty:
Part #:MARL25408W
- SLIM TYPE STEEL MATERIAL POLYESTER POWDER COATED FINISH NAVAJO WHITE COLOR 8 FT 6-3/4 INCH 1 PHASE(S) UL (CANADA AND US) APPROVAL COMMERCIAL, INDUSTRIAL, INSTITUTIONAL AND RESIDENTIAL APPLICATION 208/240 V VOLTAGE RATING WALL MOUNTING 1880 W AT 208 V, 2500 W AT 240 V POWER RATING TAMPER PROOF THERMOSTAT CONTROL TYPE 8530 BTU/HR HEATING CAPACITY ALUMINUM FINNED SHEATHED STEEL, NICKEL CHROMIUM ELEMENT HEATING ELEMENT 250 W/FT WATT DENSITY BERKO[R] BRAND DEPTH 2-7/8 INCH KNOCKOUT SIZE 7/8 INCH DIA CONDUIT SIZE 1/2 INCH 2500 MODEL
$
144.24
Qty:
Part #:MARL2544W
- SLIM TYPE STEEL MATERIAL 4 FT 6 3/4 INCH 1 PHASE(S) UL (CANADA AND US) APPROVAL COMMERCIAL, INDUSTRIAL, INSTITUTIONAL, RESIDENTIAL APPLICATION 240/208 V VOLTAGE RATING WALL MOUNTING 1000 W POWER RATING TAMPER PROOF THERMOSTAT CONTROL TYPE 3412 BTU/HR HEATING CAPACITY ALUMINUM FINNED SHEATHED STEEL, NICKEL CHROMIUM ALLOY HEATING ELEMENT 250 W/FT WATT DENSITY BERKO[R] BRAND DEPTH 2 7/8 INCH 2500 MODEL
$
76.78
Qty:
Part #:MARL2545W
- SLIM TYPE STEEL MATERIAL 5 FT 6 3/4 INCH 1 PHASE(S) UL (CANADA AND US) APPROVAL COMMERCIAL, INDUSTRIAL, INSTITUTIONAL, RESIDENTIAL APPLICATION 240/208 V VOLTAGE RATING WALL MOUNTING 1250 W POWER RATING TAMPER PROOF THERMOSTAT CONTROL TYPE 4265 BTU/HR HEATING CAPACITY ALUMINUM FINNED SHEATHED STEEL, NICKEL CHROMIUM ALLOY HEATING ELEMENT 250 W/FT WATT DENSITY BERKO[R] BRAND DEPTH 2 7/8 INCH 2500 MODEL
$
90.50
Qty:
Part #:MARL2546W
- SLIM TYPE STEEL MATERIAL 6 FT 6 3/4 INCH 1 PHASE(S) UL (CANADA AND US) APPROVAL COMMERCIAL, INDUSTRIAL, INSTITUTIONAL, RESIDENTIAL APPLICATION 240/208 V VOLTAGE RATING WALL MOUNTING 1500 W POWER RATING TAMPER PROOF THERMOSTAT CONTROL TYPE 5118 BTU/HR HEATING CAPACITY ALUMINUM FINNED SHEATHED STEEL, NICKEL CHROMIUM ALLOY HEATING ELEMENT 250 W/FT WATT DENSITY BERKO[R] BRAND DEPTH 2 7/8 INCH 2500 MODEL
$
105.84
Qty:
Part #:MARL2508NW
- SLIM TYPE STEEL MATERIAL POLYESTER POWDER COATED FINISH NAVAJO WHITE COLOR 8 FT 6-3/4 INCH 1 PHASE(S) UL (CANADA AND US) APPROVAL COMMERCIAL, INDUSTRIAL, INSTITUTIONAL AND RESIDENTIAL APPLICATION 208 V VOLTAGE RATING WALL MOUNTING 2000 W POWER RATING TAMPER PROOF THERMOSTAT CONTROL TYPE 6824 BTU/HR HEATING CAPACITY ALUMINUM FINNED SHEATHED STEEL, NICKEL CHROMIUM ELEMENT HEATING ELEMENT 250 W/FT WATT DENSITY BERKO[R] BRAND DEPTH 2-7/8 INCH KNOCKOUT SIZE 7/8 INCH DIA CONDUIT SIZE 1/2 INCH 2500 MODEL
$
282.32
Qty:
Part #:MARL2548W
- SLIM TYPE STEEL MATERIAL 8 FT 6 3/4 INCH 1 PHASE(S) UL (CANADA AND US) APPROVAL COMMERCIAL, INDUSTRIAL, INSTITUTIONAL, RESIDENTIAL APPLICATION 240/208 V VOLTAGE RATING WALL MOUNTING 2000 W POWER RATING TAMPER PROOF THERMOSTAT CONTROL TYPE 6824 BTU/HR HEATING CAPACITY ALUMINUM FINNED SHEATHED STEEL, NICKEL CHROMIUM ALLOY HEATING ELEMENT 250 W/FT WATT DENSITY BERKO[R] BRAND DEPTH 2 7/8 INCH 2500 MODEL
$
134.38
Qty:
Part #:MARLTA1AW
- NAVAJO ENAMEL WHITE COLOR RESIDENTIAL, COMMERCIAL APPLICATION 120 TO 277 VOLT VOLTAGE RATING 22 AMP CURRENT RATING 40 TO 100 DEG F TEMPERATURE RATING 1-POLE CONTROL TYPE TA MODEL
$
36.20
Qty:
Part #:MARLTA2AW
- NAVAJO ENAMEL WHITE COLOR RESIDENTIAL, COMMERCIAL APPLICATION 120 TO 277 VOLT VOLTAGE RATING 22 AMP CURRENT RATING 40 TO 100 DEG F TEMPERATURE RATING 2-POLE CONTROL TYPE TA MODEL
$
43.88
Qty:
Part #:MARLMS26
- DIGITAL ELECTRONIC LINE VOLTAGE THERMOSTAT TYPE UL (US), CSA APPROVAL 120/208/240/277 VOLT VOLTAGE RATING 22 AMP AT 120/208/240 VOLT, 18 AMP AT 277 VOLT CURRENT RATING 50 TO 80 DEG F TEMPERATURE RATING SPST, SNAP ACTION SWITCH TYPE Q-MARK BRAND 2500 MODEL
$
26.74
Qty:
Part #:MARLMD26
- DIGITAL ELECTRONIC LINE VOLTAGE THERMOSTAT TYPE UL (US), CSA APPROVAL 120/208/240/277 VOLT VOLTAGE RATING 22 AMP AT 120/208/240 VOLT, 18 AMP AT 277 VOLT CURRENT RATING 50 TO 80 DEG F TEMPERATURE RATING DPST, SNAP ACTION SWITCH TYPE Q-MARK BRAND 2500 MODEL
$
29.64
Qty:
Part #:TIFF6110
- HOT DIP GALVANIZED FINISH 10 INCH 4 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL SQUARE HEAD STYLE
$
5.26
Qty:
Part #:TIFF6280
- OVAL EYE TYPE 10 INCH 10 LENGTH - DECIMAL 10 LENGTH - FRACTIONAL 4 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL .625 NOMINAL DIAMETER - DECIMAL PP[T] BRAND WITH SQUARE NUT EYE INNER DIMENSION 1-1/2 INCH WIDTH X 2 INCH LENGTH WEIGHT 136 LB PER 100 PIECES PACKAGING QUANTITY 10 FINISH/COATING GALVANIZED LENGTH - DECIMAL - UOM IN NOMINAL DIAMETER - DECIMAL - UOM IN
$
11.07
Qty:
Part #:TIFF6370
- PLAIN TYPE 10 INCH 10 LENGTH - DECIMAL 10 LENGTH - FRACTIONAL 4 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL .625 NOMINAL DIAMETER - DECIMAL 1/2 INCH EYE INNER DIAMETER .5 EYE INNER DIAMETER - DECIMAL 1/2 EYE INNER DIAMETER - FRACTIONAL PP[T] BRAND WITH SQUARE NUT WEIGHT 145 LB PER 100 PIECES PACKAGING QUANTITY 10 EYE INNER DIAMETER - DECIMAL - UOM IN FINISH/COATING HOT DIPPED GALVANIZED LENGTH - DECIMAL - UOM IN NOMINAL DIAMETER - DECIMAL - UOM IN
$
15.30
Qty:
Part #:TIFF6380
- ANGLE TYPE 10 INCH 10 LENGTH - DECIMAL 10 LENGTH - FRACTIONAL 4 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL .625 NOMINAL DIAMETER - DECIMAL 1/2 INCH EYE INNER DIAMETER .5 EYE INNER DIAMETER - DECIMAL 1/2 EYE INNER DIAMETER - FRACTIONAL PP[T] BRAND WITH SQUARE NUT WEIGHT 150 LB PER 100 PIECES PACKAGING QUANTITY 10 EYE INNER DIAMETER - DECIMAL - UOM IN FINISH/COATING HOT DIPPED GALVANIZED LENGTH - DECIMAL - UOM IN NOMINAL DIAMETER - DECIMAL - UOM IN
$
8.90
Qty:
Part #:TIFF6382
- ANGLE TYPE 12 INCH 12 LENGTH - DECIMAL 12 LENGTH - FRACTIONAL 6 INCH THREAD LENGTH 5/8 INCH NOMINAL DIAMETER 5/8 NOMINAL DIAMETER - FRACTIONAL .625 NOMINAL DIAMETER - DECIMAL 1/2 INCH EYE INNER DIAMETER .5 EYE INNER DIAMETER - DECIMAL 1/2 EYE INNER DIAMETER - FRACTIONAL PP[T] BRAND WITH SQUARE NUT WEIGHT 165 LB PER 100 PIECES PACKAGING QUANTITY 10 EYE INNER DIAMETER - DECIMAL - UOM IN FINISH/COATING HOT DIPPED GALVANIZED LENGTH - DECIMAL - UOM IN NOMINAL DIAMETER - DECIMAL - UOM IN
$
8.32
Qty:
Part #:TIFF6912
- HOT DIP GALVANIZED FERROUS, PORCELAIN MATERIAL SERVICE ENTRANCE MAST APPLICATION 1-1/4 TO 2-1/2 INCH PIPE SIZE
$
15.44
Qty:
Part #:TIFF6913
- HOT DIP GALVANIZED FERROUS, PORCELAIN MATERIAL SERVICE ENTRANCE MAST APPLICATION 3 TO 4 INCH PIPE SIZE
$
28.55
Qty:
Part #:TIFF7530
- HOT DIP GALVANIZED FINISH 2 INCH MIN. PIPE SIZE 2 INCH MAX. PIPE SIZE 2 MIN. PIPE SIZE - DECIMAL 2 MAX. PIPE SIZE - DECIMAL 2 MIN. PIPE SIZE - FRACTIONAL 2 MAX. PIPE SIZE - FRACTIONAL #22 HANGER MOUNTING SIZE PP[T] BRAND WEIGHT 40 LB PER 100 PIECES HANGER ROD LENGTH 2-1/4 INCH STANDARD PACKAGE 25 MAXIMUM PIPE SIZE - DECIMAL - UOM IN MINIMUM PIPE SIZE - DECIMAL - UOM IN
$
3.84
Qty:
Part #:TIFF7534
- HOT DIP GALVANIZED FINISH 2 INCH MIN. PIPE SIZE 2 INCH MAX. PIPE SIZE 2 MIN. PIPE SIZE - DECIMAL 2 MAX. PIPE SIZE - DECIMAL 2 MIN. PIPE SIZE - FRACTIONAL 2 MAX. PIPE SIZE - FRACTIONAL 3/8 INCH HANGER MOUNTING SIZE PP[T] BRAND WEIGHT 60 LB PER 100 PIECES HANGER ROD LENGTH 10 INCH STANDARD PACKAGE 25 MAXIMUM PIPE SIZE - DECIMAL - UOM IN MINIMUM PIPE SIZE - DECIMAL - UOM IN
$
7.04
Qty:
Displaying: 1 - 24 of 55 Matching Items