MIDWEST ELECTRICAL PRODUCTS
COOPER CROUSE-HINDS
View:
Active Filters :
$
38.59
Qty:
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:ANGE7728500
- 3-WAY CONTACT CONFIGURATION UL, CSA APPROVAL CEILING FAN APPLICATION 125/250 VAC VOLTAGE RATING 3 AMPERE AT 250 VAC, 6 AMPERE AT 125 VAC CURRENT RATING BRASS ACTUATOR FINISH CORD SIZE 2 FT INCLUDES BRAIDED CORD
$
3.96
Qty:
Part #:PLG034
- THREADED TYPE STEEL MATERIAL ELECTROGALVANIZED CHROMATE TREATED FINISH THREADED CONDUIT HUB USED ON UL 1203, CSA C22.2 APPROVAL CLASS I DIV 1 AND 2 GROUP A B, CLASS II DIV 1 GROUP E F G, CLASS II DIV 2 GROUP F G, CLASS III ENCLOSURE 3/4 INCH TRADE SIZE RECESSED HEAD STYLE CONSTRUCTIONAL FEATURE EXPLOSIONPROOF, DUST IGNITIONPROOF APPLICATION HAZARDOUS LOCATION APPLICABLE STANDARD NEC/CEC PLG MODEL
$
0.70
Qty:
Part #:NSIAPS41
- TIN PLATED ALUMINUM ALLOY MATERIAL 6 AWG STRANDED MIN. RUN CONDUCTOR SIZE 4/0 AWG STRANDED MAX. RUN CONDUCTOR SIZE 6 AWG STRANDED MIN. TAP CONDUCTOR SIZE 4/0 AWG STRANDED MAX. TAP CONDUCTOR SIZE SPLIT BOLT INSTALLATION COPPER/ALUMINUM CONDUCTOR MATERIAL UL 486A/B, CSA APPROVAL 600 VOLT VOLTAGE RATING WIRE TYPE CLASS A AND B NUMBER OF CONDUCTORS 2 WIRE SIZE 0.368 TO 0.575 INCH TORQUE RATING 650 INCH-POUND OVERALL DIMENSION 1.13 INCH WIDTH X 2.54 INCH HEIGHT TEMPERATURE RATING 90 DEG C APPLICATION WIRE TERMINATION APS MODEL
$
51.19
Qty:
Part #:NSIC16-N
- INSULATED TYPE 16 TO 14 AWG WIRE SIZE UL, CSA APPROVAL 100 PER BOX STANDARD PACKAGE NYLON INSULATION MATERIAL COPPER WIRE TYPE
$
0.37
Qty:
Part #:NSISKAB-2
- HEAT SHRINK TUBE, CONNECTOR CONTENTS UL APPROVAL INSULATED BUTT CONNECTOR TYPE 600 V VOLTAGE RATING 8 TO 2 AWG (ALUMINUM/COPPER) CONDUCTOR SIZE HEAT SHRINK TUBE INSULATOR TYPE 1 SPLICE(S) OPERATING TEMPERATURE 105 DEG C STANDARD PACKAGE 24
$
23.10
Qty:
$
197.55
Qty:
$
70.10
Qty:
Part #:NSI75110CW
- SP3T, 2 CIRCUIT, 3 WAY CONTACT CONFIGURATION UL, CSA APPROVAL 125/250 VAC VOLTAGE RATING 6 AMPERE AT 125 VAC, 3 AMPERE AT 250 VAC CURRENT RATING WIRE LEAD TERMINAL TYPE BRASS ACTUATOR MATERIAL
$
9.70
Qty:
Part #:CRS670
- BLANK, SCREW, WEDGENUT TYPE SHEET STEEL (COVER), STAINLESS STEEL (SCREW) MATERIAL 7 INCH UL 514B, CSA C22.2 APPROVAL 2 INCH TRADE SIZE FORM 7 FORM TYPE COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION
$
23.41
Qty:
Part #:CRSENR5201
- ACRYLIC PAINTED DIE-CAST COPPER-FREE ALUMINUM MATERIAL UL 894/698/1203, CSA C22.2 APPROVAL 125 VOLT AC VOLTAGE RATING CLASS I DIV 1 AND 2 GROUP C D, CLASS II DIV 1 GROUP E F G, CLASS II DIV 2 GROUP F G, CLASS III, NEMA 3, 7B/7C/7D/9E/9F/9G ENCLOSURE 20 AMP CURRENT RATING ENP MATING PLUG ARK-GARD[R] BRAND CONSTRUCTIONAL FEATURE DUSTPROOF, EXPLOSIONPROOF, IGNITIONPROOF, RAIN TIGHT APPLICATION WET LOCATION ENR MODEL
$
812.45
Qty:
Part #:CRSGASK571
- NEOPRENE MATERIAL 3.625 INCH CLIP-ON COVER TYPE 1/2 INCH TRADE SIZE FORM 7 FORM TYPE CONDULET[R] BRAND APPLICATION NON-HAZARDOUS LOCATION USED ON CONDUIT BODY
$
6.76
Qty:
Part #:CRSGASK576
- NEOPRENE MATERIAL 7 INCH CLIP-ON COVER TYPE 2 INCH TRADE SIZE FORM 7 FORM TYPE CONDULET[R] BRAND APPLICATION NON-HAZARDOUS LOCATION USED ON CONDUIT BODY
$
13.57
Qty:
Part #:CRSGASK578
- NEOPRENE MATERIAL 9.125 INCH CLIP-ON COVER TYPE 2-1/2 INCH, 3 INCH TRADE SIZE FORM 7 FORM TYPE CONDULET[R] BRAND APPLICATION NON-HAZARDOUS LOCATION USED ON CONDUIT BODY
$
22.53
Qty:
Part #:CRSLL67
- ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 8.125 INCH LENGTH X 3.125 INCH WIDTH X 4.125 INCH HEIGHT SIZE RIGID CONDUIT USED ON 2 INCH HUB SIZE THREADED INSTALLATION LL CONFIGURATION 2 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE 90 DEGREE HUB LOCATION FORM 7 FORM TYPE LEFT SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D LL MODEL
$
132.71
Qty:
Part #:CRSLR37
- ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 6 INCH LENGTH X 1.875 INCH WIDTH X 2.75 INCH HEIGHT SIZE RIGID CONDUIT USED ON 1 INCH HUB SIZE THREADED INSTALLATION LR CONFIGURATION 2 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE 90 DEGREE HUB LOCATION FORM 7 FORM TYPE RIGHT SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D LR MODEL
$
23.63
Qty:
Part #:CRSLR67
- ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 8.125 INCH LENGTH X 3.125 INCH WIDTH X 4.125 INCH HEIGHT SIZE RIGID CONDUIT USED ON 2 INCH HUB SIZE THREADED INSTALLATION LR CONFIGURATION 2 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE 90 DEGREE HUB LOCATION FORM 7 FORM TYPE RIGHT SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D LR MODEL
$
132.71
Qty:
Part #:CRST27
- ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 6.25 INCH LENGTH X 2 INCH WIDTH X 2.625 INCH HEIGHT SIZE RIGID CONDUIT USED ON 3/4 INCH HUB SIZE THREADED INSTALLATION T CONFIGURATION 3 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE TEE HUB LOCATION FORM 7 FORM TYPE SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D T MODEL
$
32.63
Qty:
Part #:CRSUNF505
- FEMALE/FEMALE TYPE ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY MATERIAL 2-5/8 INCH UL 1203, CSA C22.2 APPROVAL 3-1/16 INCH DIAMETER 1-1/2 INCH TRADE SIZE CONSTRUCTIONAL FEATURE EXPLOSIONPROOF, DUST IGNITIONPROOF ENCLOSURE TYPE CLASS I DIV 1 AND 2 GROUP C D, CLASS II DIV 1 GROUP E F G, CLASS II DIV 2 GROUP F G, CLASS III APPLICABLE STANDARD NEC/CEC UNF MODEL
$
127.91
Qty:
Part #:MIDWR075GP6
- METERED RINGLESS TYPE G90 GALVANIZED STEEL MATERIAL ZINC COATED FINISH 1 AWG TO 300 KCMIL SOLID/STRANDED (COPPER/ALUMINUM), 12 TO 2 AWG SOLID/STRANDED (COPPER/ALUMINUM, GROUND) WIRE SIZE UL, CUL APPROVAL EARTH BURIAL MOUNTING NEMA 3R ENCLOSURE 100 AMPERE CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION CB250 FIRST POSITION CIRCUIT BREAKER TYPE BR54U LEFT POSITION RECEPTACLE TYPE GFI120 THIRD POSITION CIRCUIT BREAKER TYPE CB130 SECOND POSITION CIRCUIT BREAKER TYPE 5-20R2 RIGHT POSITION RECEPTACLE TYPE R32U CENTER POSITION RECEPTACLE TYPE APPLICABLE STANDARD NEMA, NEC VOLTAGE RATING 120/240 V
$
4,989.88
Qty:
Displaying: 1 - 24 of 41 Matching Items