Metallics
COOPER B-LINE
View:
Active Filters :
- Mfr / Trade Name: COOPER B-LINE Metallics s.e.s.
Part #:MTLWAKJ14
- ANCHOR, MASONRY DRILL BIT, SCREW TYPE 201 PIECE(S) JAR PACKAGING TYPE (100) 1/4 INCH RED PLASTIC ANCHOR, (100) #10 X 1 INCH PAN COMBO SCREW, (1) 1/4 INCH MASONRY DRILL KIT CONTENT WEIGHT 1.01 LB PACKAGING QUANTITY 1 JAR
$
8.26
Qty:
Part #:BLINBR-32-4W
- THREADED BRIDLE RING TO WOOD BEAM TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL UL (CANADA AND US) APPROVAL 1/4 INCH MOUNTING SIZE 100 PER BOX STANDARD PACKAGE 50 LB LOAD CAPACITY 2 INCH FITTING SIZE BR MODEL
$
1.59
Qty:
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:BLINBB8-16
- WALL STUD, SUPPORT TYPE PRE-GALVANIZED FINISH UL (CANADA AND US) APPROVAL SUPPORTS 4 INCH, 4-11/16 INCH BOX/PLASTER RING APPLICATION BOX BRACKET RUFF-IN[TM] BRAND STUD SPACING 16 INCH BB MODEL
$
3.03
Qty:
$
82.71
Qty:
Part #:MTLAS78
- SHIP TYPE HEAT TREATED TOOL STEEL MATERIAL 6 INCH OVERALL LENGTH HEX SHANK TYPE 7/16 INCH SHANK SIZE NUMBER OF FLUTES 1 FLUTE TYPE TWIST WEIGHT 0.39 LB PACKAGING QUANTITY 1 BIT PER PACK INCLUSIONS/FEATURES DEEP THROAT FOR FAST CHIP REMOVAL, EXTRA HIGH QUALITY, DESIGNED FOR WOOD PRODUCT CONSTRUCTION DIAMETER 7/8 INCH DIAMETER - DECIMAL .875 DIAMETER - DECIMAL - UOM IN DIAMETER - FRACTIONAL 7/8
$
37.01
Qty:
Part #:MTLAL34
- SHIP TYPE HEAT TREATED TOOL STEEL MATERIAL 17 INCH OVERALL LENGTH HEX SHANK TYPE 7/16 INCH SHANK SIZE NUMBER OF FLUTES 1 FLUTE TYPE TWIST WEIGHT 0.91 LB PACKAGING QUANTITY 1 BIT PER PACK INCLUSIONS/FEATURES DEEP THROAT FOR FAST CHIP REMOVAL, EXTRA HIGH QUALITY, DESIGNED FOR WOOD PRODUCT CONSTRUCTION DIAMETER 3/4 INCH DIAMETER - DECIMAL .75 DIAMETER - DECIMAL - UOM IN DIAMETER - FRACTIONAL 3/4
$
47.23
Qty:
Part #:MTLJRM113
- SLOTTED/PHILLIPS TYPE STEEL MATERIAL ZINC CHROMATE FINISH 2 INCH #10 NOMINAL DIAMETER 32 TPI ROUND HEAD STYLE
$
0.05
Qty:
Part #:SBN12
- SILICON BRONZE MATERIAL 1/2 INCH NOMINAL DIAMETER 13 TPI METALLICS BRAND BOLT SIZE 1/2 INCH
$
238.94
Per Hundred
Qty:
Part #:BLINBA-4-16
- T BAR TO ELECTRICAL FIXTURE TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL T-BAR USED ON TWIST-ON INSTALLATION UL (CANADA AND US) APPROVAL 100 PER BOX STANDARD PACKAGE 50 LB LOAD CAPACITY 1/4 INCH-20 TPI X 5/8 INCH L STUD FASTENER TYPE 15/16 INCH T BAR SIZE FINISH BLACK BA MODEL
$
0.99
Qty:
Part #:BLINBG-8-12-U-2-4
- 360 DEGREE PIVOT TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL HAMMER-ON, PLIERS INSTALLATION UL (CANADA AND US) APPROVAL BOTTOM MOUNTING 100 PER BOX STANDARD PACKAGE 1/2 INCH, 3/4 INCH CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE COOPER B-LINE BRAND BG MODEL
$
1.31
Qty:
Part #:BLINBG-8-12-U-5-8
- 360 DEG PIVOT TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL HAMMER ON, PLIER INSTALLATION UL (CANADA AND US) APPROVAL BOTTOM MOUNTING 100 PER BOX STANDARD PACKAGE 1/2, 3/4 INCH CONDUIT SIZE 75 LB LOAD CAPACITY 5/16 TO 1/2 INCH BEAM/FLANGE SIZE GUIDE-RITE[TM] BRAND BG MODEL
$
1.46
Qty:
Part #:BLINBG-16-U-2-4
- 360 DEGREE PIVOT TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL HAMMER-ON, PLIERS INSTALLATION UL (CANADA AND US) APPROVAL BOTTOM MOUNTING 100 PER BOX STANDARD PACKAGE 1 INCH CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE COOPER B-LINE BRAND BG MODEL
$
1.43
Qty:
Part #:BLINBW-8
- ASTM A684/AISI 1055 HEAT TREATED HIGH CARBON COLD ROLLED STEEL MATERIAL UL (CANADA AND US) APPROVAL 100 PER BOX STANDARD PACKAGE 100 POUND (HORIZONTAL FLANGE), 25 POUND (VERTICAL FLANGE), 50 POUND (VERTICAL WIRE OR ROD) LOAD CAPACITY 1/2 INCH EMT/RIGID CONDUIT/CABLE SIZE COOPER B-LINE BRAND ROD SIZE 3/16 INCH, 1/4 INCH BW MODEL
$
0.50
Qty:
Part #:BLINBW-12
- ASTM A684/AISI 1055 HEAT TREATED HIGH CARBON COLD ROLLED STEEL MATERIAL UL (CANADA AND US) APPROVAL 100 PER BOX STANDARD PACKAGE 100 POUND (HORIZONTAL FLANGE), 25 POUND (VERTICAL FLANGE), 50 POUND (VERTICAL WIRE OR ROD) LOAD CAPACITY 1/2 OR 3/4 INCH (EMT/RIGID) CONDUIT/CABLE SIZE COOPER B-LINE BRAND ROD SIZE 3/16 INCH, 1/4 INCH BW MODEL
$
0.55
Qty:
Part #:BLINB22SH-120GLV
- METAL FRAMING, SINGLE TYPE ASTM A653 LOW CARBON STEEL MATERIAL PRE-GALVANIZED FINISH 120 INCH 1-5/8 INCH 1-5/8 INCH SLOTTED CONFIGURATION 12 GAUGE THICKNESS COLD/ROLL FORMED PROCESS 1.82 POUND PER FOOT WEIGHT 2 INCH CENTER SPACING 1 CHANNEL(S) 1-1/8 INCH LENGTH X 9/16 INCH WIDTH HOLE/SLOT SIZE 1.403 INCH DEFLECTION 0.562 SQUARE INCH CROSS SECTION AREA 340 POUND BEAM LOAD RATING 2680 POUND (0.65 LOAD FACTOR) COLUMN LOAD RATING COOPER B-LINE BRAND B22SH MODEL
$
1.84
FT
Qty:
Part #:BLINB2208PAZN
- ZINC ELECTROPLATED FINISH 400 LB VERTICAL, 50 LB TRANSVERSE, 50 LB LONGITUDINAL LOAD RATING CHANNEL MOUNTING TYPE ASTM A570 33 LOW CARBON STEEL CLAMP MATERIAL B-LINE. BRAND WEIGHT 11 LB PER 100 PIECES ITEMS/FEATURES SLOTTED HEX HEAD MACHINE SCREW, SQUARE NUT, PRE ASSEMBLED PIPE CLAMP MATERIAL THICKNESS 16 GAUGE SAFETY FACTOR 5 NOMINAL PIPE SIZE 1/2 INCH NOMINAL PIPE SIZE - DECIMAL .5 NOMINAL PIPE SIZE - FRACTIONAL 1/2 NUMBER OF BOLTS 1 B2208 MODEL
$
3.07
Qty:
Part #:BLINBA50
- T-BAR TO BOX ASSEMBLY TYPE PRE-GALVANIZED ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL SQUARE/OCTAGONAL BOX USED ON UL (CANADA AND US) APPROVAL 25 PER BOX STANDARD PACKAGE 70 POUND LOAD CAPACITY 24 INCH SPAN BOX HANGER FASTENER TYPE COOPER B-LINE BRAND BA MODEL
$
6.45
Qty:
Part #:BLINBRS-32
- BRIDLE RING TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL UL (CANADA AND US) APPROVAL 50 PER BOX STANDARD PACKAGE 2 INCH FITTING SIZE BRS MODEL
$
6.39
Qty:
Part #:BLIN4436GGV-NK
- LAY-IN TYPE 16 GAUGE STEEL MATERIAL GALVANIZED FINISH 36 INCH 4 INCH 4 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICABLE STANDARD IEC 529 APPLICATION HOUSES RUNS OF CONTROL AND POWER CABLE, USED FOR CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
20.81
Qty:
Part #:BLIN6660GGV-NK
- LAY-IN TYPE 16 GAUGE STEEL MATERIAL GALVANIZED FINISH 60 INCH 6 INCH 6 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICABLE STANDARD IEC 529 APPLICATION HOUSES RUNS OF CONTROL AND POWER CABLE, USED FOR CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
44.32
Qty:
Part #:BLIN8860GGV-NK
- LAY-IN TYPE 14 GAUGE STEEL MATERIAL GALVANIZED FINISH 60 INCH 8 INCH 8 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICABLE STANDARD IEC 529 APPLICATION HOUSES RUNS OF CONTROL AND POWER CABLE, USED FOR CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
88.69
Qty:
Part #:BLIN4460GNK
- LAY-IN TYPE 16 GAUGE STEEL MATERIAL ANSI 61 GRAY ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH 60 INCH 4 INCH 4 INCH UL 870, CSA C22.2 APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICABLE STANDARD IEC 529 APPLICATION HOUSES RUNS OF CONTROL AND POWER CABLE, USED FOR CABLE AND WIRE JUNCTION, DISTRIBUTION AND TERMINATION
$
33.28
Qty:
Displaying: 1 - 24 of 34 Matching Items