Milwaukee
Firex
Part #:KIDHD135F
-
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke.
The Kidde HD135F 120VAC wire in heat alarm gives you and your family an early warning to dangerous temperatures of 135F or more
This unit also includes a tamper resist pin that helps to deter thief and tampering.
This unit can be used as a single station unit or it can be interconnected to up to 24 Kidde devices in a multiple station arrangement
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke. The alarm will sound if temperatures rise above 135F. The Kidde HD135F is interconnectable. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices (Smoke, heat, CO, etc) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. This unit includes a 5-year limited warranty and is UL Listed.
Interconnectable &ndash Interconnects with up to 24 Kidde devices of which 18 can be initiating.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
9V Battery Back Up &ndash Provides continuous protection even during power outages.
Red LED &ndash Flashes every 30-40 seconds to indicate proper operation.
Low Battery Indicator &ndash Alerts user in the event of alow or missing battery.
Quick Connect Power Harness &ndash Makes installation fast and easy.
Technical Specifications
Model
HD135F
UPC Number
0-25417-84135-0
Power Source
120VAC, 60HZ, 9V battery backup
Sensor
Heat
Audio Alarm
85dB at 10ft
Temperature Range
-20F to +100F (-29C and +38C)
Humidity Range
5%-95% relative humidity (RH)
Size
5&rdquo in diameter x 2&rdquo depth
Weight
.75lbs
Interconnects
Up to 24 Kidde devices of which 18 can be initiating devices.
LED
Green, AC power present, alarm mode flashing Red indicates originating unit
Warranty
5 year limited warranty
$
34.89
Qty:
Part #:MILW48-13-5870
- The Milwaukee 7/8" x 18" Ship Auger Bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, Pex water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue.The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension. Bullets Durable Hardened, one-face 20 rake angle design enhances nail resistance, chip removal and fast, easy sharpening Fast chip removal Nonstick, polished and coated flutes eliminate costly cleaning time Impact-rated shank Strong enough to use with an impact wrench Versatile One line of Milwaukee auger bits covers all applications and tools 92758
$
31.19
Qty:
Part #:MILW48-20-7250
- Milwaukee MX4 4-Cutter SDS-Plus Rotary Hammer Drill Bits provide up to 4x Life in Rebar and up to 20PERC more holes per charge in cordless rotary hammers. The enhanced rebar guards and 4-Cutter 90 head design provide increased life and durability in hard aggregate and rebar. Breaker Point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20PERC more holes per charge in cordless rotary hammers while making it a very durable bit in corded and cordless rotary hammers. Additionally, MX4 features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the MX4 4-Cutter drill bit line provides the ideal solution in general concrete and reinforced concrete for cordless and corded rotary hammer users. Bullets Enhanced Rebar Guards provide increased durability Breaker Points lead to faster drilling speeds Variable Flute for Up to 20PERC more Holes per Charge in Cordless Rotary Hammers Centering Tip for exact spot drilling Wear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement Reinforced Flutes for minimized vibration and maximum durability 11350
$
52.83
Qty:
Part #:MILW48-20-7256
- Milwaukee MX4 4-Cutter SDS-Plus Rotary Hammer Drill Bits provide up to 4x Life in Rebar and up to 20PERC more holes per charge in cordless rotary hammers. The enhanced rebar guards and 4-Cutter 90 head design provide increased life and durability in hard aggregate and rebar. Breaker Point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20PERC more holes per charge in cordless rotary hammers while making it a very durable bit in corded and cordless rotary hammers. Additionally, MX4 features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the MX4 4-Cutter drill bit line provides the ideal solution in general concrete and reinforced concrete for cordless and corded rotary hammer users. Bullets Enhanced Rebar Guards provide increased durability Breaker Points lead to faster drilling speeds Variable Flute for Up to 20PERC more Holes per Charge in Cordless Rotary Hammers Centering Tip for exact spot drilling Wear Mark Indicators to show end of life and when bit no longer meets the ANSI requirement Reinforced Flutes for minimized vibration and maximum durability 11602
$
62.20
Qty:
Part #:MILW48-28-4006
- Extend your reach a full 12 inches when drilling with Milwaukee Selfeed Bits, Auger Bits and Hole Saws. Accepts all 7/16 inch hex, secures with a hex key included. The 7/16 inch hex fits both 3 jawed chucks, 1/2 inch drill capacity and larger, as well as 7/16 inch Quick Change chucks. Bullets 7/16 in. hex shank 12 in. length For selfeed bits, auger bits and hole saw 1 in. diameter and larger with 7/16 in. shank 22516
$
17.33
Qty:
Part #:MILW48-39-0521
- Maximize your band saw performance and make straight, accurate cuts in a variety of materials with the Milwaukee 18 TPI Standard / Deep-Cut Portable Band Saw Blade (3-Pack). Get exceptional durability and accuracy for your portable band saw that takes a 44-7/8" blade. Milwaukee's standard/deep cut band saw blades deliver long tooth life in a variety of metal, including strut, conduit, angle iron, copper tube, threaded rod and pipe. The blade's tooth form, pitch and set ensure straight, accurate cuts time and time again. Bullets Fast cutting Precision-formed teeth create fast, clean cuts Exceptional durability Matrix II high-speed steel teeth excel in metal-cutting applications Long life Alloy backing steel provides extended blade life Versatility Designed for cutting common materials 5/32" - 3/16" thick and very hard materials 3/16" - 5/16" thick 32263
$
16.80
Qty:
Part #:MILW48-39-0530
- Maximize your band saw performance and make straight, accurate cuts in a variety of materials with the Milwaukee 24 TPI Standard / Deep-Cut Portable Band Saw Blade. Get exceptional durability and accuracy for your portable band saw that takes a 44-7/8" blade. Milwaukee's standard/deep cut band saw blades deliver long tooth life in a variety of metal, including strut, conduit, angle iron, copper tube, threaded rod and pipe. The blade's tooth form, pitch and set ensure straight, accurate cuts time and time again. Bullets Fast cutting Precision-formed teeth create fast, clean cuts Exceptional durability Matrix II high-speed steel teeth excel in metal-cutting applications Long life Alloy backing steel provides extended blade life Versatility Designed for cutting common materials up to 5/32" thick and very hard materials 5/32" - 3/16" thick 32355
$
7.28
Qty:
Part #:MILW49-22-4185
- Made in the USA, the Milwaukee Hole Dozer Hole Saw features Rip Guard, the strongest tooth form in the industry, backed by the Rip Guard Limited Lifetime Tooth Break Warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8PERC cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack increases productivity and eliminates wasted downtime between holes. For fast, tool-free change-outs, use Milwaukee's universal Quick-Change Arbors. 49-56-7210, 49-56-7240, 49-56-7250, and 49-56-9100. Bullets Rip Guard, the strongest tooth form in the industry Rip Guard Limited Lifetime Tooth Break Warranty Plug Jack, an all access slot design for fast plug removal Bi-metal construction with 8PERC cobalt for increased wear resistance 55033
$
281.05
Qty:
Part #:MILW49-56-0300
- Milwaukee recessed light hole saws are manufactured using carbide grit for cutting through drywall, plaster, acoustical tile, wood and stucco with mesh. Made with a continual rim, these saws wont' tear material and will leave a clean finish. Bullets Continual rim for clean cuts Carbide grit edge for abrasive materials Solid, welded construction provides accurately sized holes Open back for easy plug removal Use to install 4" recessed light fixtures requiring a 4-3/8" hole 95053
$
34.15
Qty:
Part #:MILW49-56-0305
- Milwaukee recessed light hole saws are manufactured using carbide grit for cutting through drywall, plaster, acoustical tile, wood and stucco with mesh. Made with a continual rim, these saws wont' tear material and will leave a clean finish. Bullets Continual rim for clean cuts Carbide grit edge for abrasive materials Solid, welded construction provides accurately sized holes Open back for easy plug removal Use to install 6" recessed light fixtures requiring a 6-3/8" hole 95107
$
34.15
Qty:
Part #:MILW49-56-6560
- Hole Saw Arbor Adapter Bullets For use with hole saws up to 1-1/2 in. 99952
$
2.39
Qty:
Part #:MILW49-56-9100
- 7/16" Large Thread Quick Change Arbor Bullets Tool-free operation Universal, quick change with all brands of hole saws No adapters required Durable hardened steel construction Fits all hole saws 1-1/4 in. and larger Fits all drill chucks 1/2 in. and larger 00832
$
17.92
Qty:
Part #:MILW48-39-0528
- Maximize your compact band saw performance and make straight, accurate cuts in a variety of materials with the Milwaukee 18 TPI Compact Portable Band Saw Blade. Get long tooth life and exceptional durability when cutting a variety of metal, including strut, conduit, angle iron, copper tube, threaded rod and pipe. The blade's tooth form, pitch and set ensure straight, accurate cuts time and time again. One blade per package. Bullets Fast cutting Precision-formed teeth create fast, clean cuts Exceptional durability Matrix II high-speed steel teeth excel in metal-cutting applications Long life Alloy backing steel extends blade life Versatile Designed for cutting common materials 5/32" - 3/16" thick and very hard materials 3/16" - 5/16" thick 01907
$
7.28
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Displaying: 1 - 15 of 15 Matching Items