Motor Control Swtch & Dis
Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
View:
Active Filters :
- Application: Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Motor Control Swtch & Dis Nonmetallic Cable Reduces the Size of Knockout Holes
![3/8 ROMEX CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN038.jpg)
Part #:RXCN038
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL (2) SCREW INSTALLATION UL 514B APPROVAL 1000 STANDARD PACKAGE 3/8 INCH TRADE SIZE 1/2 INCH KNOCKOUT SIZE (2) 14 AWG, (2) 12 AWG CORD SIZE NON-INSULATED THROAT TYPE NON-METALLIC CABLE SINGLE CABLE OPENING
$
0.33
Qty:
![3/4 NM CABLE CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN034.jpg)
Part #:RXCN034
- ZINC ELECTROPLATED STEEL MATERIAL (2) SCREW TILT-IN INSTALLATION ROMEX/NON-METALLIC CABLE CABLE TYPE (2) OR (3) 8 AWG, 6 AWG, 4 AWG CABLE SIZE 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 INCH, 1 INCH KNOCKOUT SIZE NON-INSULATED THROAT TYPE
$
1.28
Qty:
![PVC NM CBL CONN 1 WIRE [Romex Connector, NM-B Connector]](https://southerntierelectricsupply.com/productimage/detail/ARLNM840.jpg)
Part #:ARLNM840
- STRAIGHT TYPE PVC MATERIAL 0.965 INCH OUTER DIAMETER X 1.406 INCH LENGTH SIZE UL, CSA APPROVAL 3/8 INCH THREAD SIZE KNOCKOUT SIZE 1/2
$
0.23
Qty:
Part #:ARLNM841
- STRAIGHT, PUSH-IN TYPE PLASTIC MATERIAL 1.125 INCH DIA X 1.34 INCH L SIZE UL, CSA APPROVAL 1/2 INCH THREAD SIZE PACKAGING QUANTITY 1000 PER PACK
$
0.40
Qty:
$
0.25
Qty:
Part #:TOP457
- GRAY PLASTIC MATERIAL SNAP-IN INSTALLATION NON-METALLIC CABLE CABLE TYPE (2) 14 AWG OR (2) 12 AWG CABLE SIZE UL APPROVAL 1000 PER CASE STANDARD PACKAGE 1/2 INCH KNOCKOUT SIZE ROHS COMPLIANT SIZE 1 INCH DIA
$
0.29
Qty:
$
1.45
Qty:
Part #:CWDAHDS30
- NON-FUSED TYPE 8.75 INCH L X 5 INCH W X 5.68 INCH H SIZE PADLOCK HANDLE TYPE 3 PHASE(S) UL (CANADA AND US) APPROVAL CONTROL CIRCUIT APPLICATION 600 VAC VOLTAGE RATING NEMA 4X, 12, IP67 ENCLOSURE 30 AMPERE CURRENT RATING 3 POLE(S) 14 TO 10 AWG CONDUCTOR SIZE ROHS COMPLIANT MATERIAL THERMOPLASTIC
$
223.62
Qty:
$
357.98
Qty:
Part #:CWDAH7810UD
- 3-PHASE TYPE 1.69 INCH WIDTH X 1.75 INCH DEPTH X 3.28 INCH HEIGHT SIZE 3-POLE, 1-THROW OPERATION TYPE UL (CANADA AND US) APPROVAL 600 VOLT AC VOLTAGE RATING NEMA 1/3R/4X ENCLOSURE 30 AMP CURRENT RATING 7.5 HP AT 240 V 3 HP AT 120 V 15 HP AT 600 V 15 HP AT 480 V ROHS COMPLIANT WIRE SIZE 10 AWG APPLICATION INDUSTRIAL WIRING POSITION FRONT CONSTRUCTIONAL FEATURE CORROSION RESISTANCE
$
132.26
Qty:
$
128.58
Qty:
$
96.54
Qty:
Part #:CWDAH6810U
- 1-PHASE TYPE GLASS-FILLED NYLON MATERIAL 1.69 INCH W X 1.75 INCH D X 3.81 INCH H SIZE DPST OPERATION TYPE UL (CANADA AND US) APPROVAL 600 VAC VOLTAGE RATING 30 AMPERE CURRENT RATING 5 HP HP AT 240 V 2 HP HP AT 120 V 7.5 HP HP AT 600 V 7.5 HP HP AT 480 V ARROW HART[R] BRAND TERMINATION STYLE FRONT WIRED SCREW WIRE SIZE 10 AWG ROHS COMPLIANT NAFTA COMPLIANT
$
88.16
Qty:
Part #:CWDAHMC240C
- Man Cont 2Pos DPST 40A 600VAC Clamp BK 3653884
$
90.50
Qty:
Part #:RW034X012
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1/2 INCH SMALL END TRADE SIZE 3/4 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.20
Qty:
Part #:RW100X012
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1/2 INCH SMALL END TRADE SIZE 1 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.33
Qty:
Part #:RW100X034
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 3/4 INCH SMALL END TRADE SIZE 1 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.33
Qty:
Part #:RW114X034
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 3/4 INCH SMALL END TRADE SIZE 1-1/4 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.71
Qty:
Part #:RW114X100
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1 INCH SMALL END TRADE SIZE 1-1/4 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.71
Qty:
Part #:RW112X012
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1/2 INCH SMALL END TRADE SIZE 1-1/2 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.93
Qty:
Part #:RW112X034
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 3/4 INCH SMALL END TRADE SIZE 1-1/2 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.93
Qty:
Part #:RW112X100
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1 INCH SMALL END TRADE SIZE 1-1/2 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.87
Qty:
Part #:RW112X114
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1-1/4 INCH SMALL END TRADE SIZE 1-1/2 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.87
Qty:
Displaying: 1 - 24 of 50 Matching Items