Proflex Torsion Zone - Impact Ready, Spring Loaded Clip, Modular Case
Optimized Teeth Pattern for Fast, Consistent Cutting of Steel
View:
Part #:KLE31907
- 118 DEGREE, SPLIT POINT TYPE TEMPERED HIGH SPEED STEEL MATERIAL 3-1/2 INCH LENGTH OVERALL SIZE 1/4 INCH DESIGNATED SIZE PILOT BIT HOLE SAW ARBOR USED ON ITEM 31905, 31906 USED ON PART NO
$
4.99
Part #:KLE33801
- Klein Tools designed a set of ProFlex Torsion Zone Impact Driver Bits for the professional tradesman and do-it-yourself enthusiasts. All of the bits are made of high-impact rated S2 steel and feature an optimized torsion zone that absorbs impact forces to increase the lifetime of the bit. The 3-Inch bit holder and 1/4-Inch and 5/16-Inch nut drivers have strong magnets to easily hold bits and fasteners in place. Minimal chamfering on the nut drivers hex pockets increases surface contact between the nut and driver for better performance. All 40 pieces fit in a durable, impact-resistant case featuring steel hinges, a stay-shut latch and modular stackability with other cases of similar design.
$
24.98
Part #:G1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH IMC/RIGID CONDUIT USED ON 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.17
Qty:
Part #:E1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.562 INCH EMT CONDUIT USED ON UL APPROVAL 1000 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.12
Qty:
Part #:G1H034
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.75 INCH IMC/RIGID CONDUIT USED ON 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.25
Qty:
Part #:G1H100
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON 200 STANDARD PACKAGE 1 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.32
Qty:
Part #:G1H114
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.68
Qty:
Part #:G1H112
- 1-HOLE, SNAP-ON, RIBBED TYPE 11 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON 100 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.437 INCH HOLE/BOLT SIZE
$
1.01
Qty:
Part #:G1H200
- 1-HOLE, SNAP-ON, RIBBED TYPE 11 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1.125 INCH IMC/RIGID CONDUIT USED ON 50 STANDARD PACKAGE 2 INCH TRADE SIZE 0.562 INCH HOLE/BOLT SIZE
$
1.02
Qty:
Part #:E1H100
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.75 INCH EMT CONDUIT USED ON UL APPROVAL 500 STANDARD PACKAGE 1 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.27
Qty:
Part #:E1H114
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH EMT CONDUIT USED ON 200 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.44
Qty:
Part #:E1H112
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1 INCH EMT CONDUIT USED ON 100 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.95
Qty:
Part #:E1H200
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1.125 INCH EMT CONDUIT USED ON 100 STANDARD PACKAGE 2 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.95
Qty:
Part #:E1H034
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH EMT CONDUIT USED ON UL APPROVAL 500 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.16
Qty:
Part #:CUTTP452
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE, (1) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 8 KNOCKOUT(S) (1) BOTTOM, (3) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.70
Qty:
Part #:CUTTP560
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (8) 1 INCH SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (5) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.82
Qty:
Part #:CUTTP556
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (8) 1/2 INCH SIDE, (4) 3/4 INCH SIDE KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.13
Qty:
Part #:CUTTP563
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (6) 1/2 INCH SIDE, (6) (1/2 INCH-3/4 INCH) CONCENTRIC SIDE KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.38
Qty:
Part #:CUTTP554
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (8) 3/4 INCH SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (5) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
12.20
Qty:
Part #:CUTTP558
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (4) 3/4 INCH SIDE, (4) 1 INCH SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (5) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.55
Qty:
Displaying: 1 - 20 of 20 Matching Items