Prolume Eco-Shield
M18 Fuel
View:
Active Filters :
- Sub Brand: M18 Fuel Prolume Eco-Shield
Part #:MILW2767-20
- The 2767 M18 FUEL high torque 1/2 in. impact wrench with friction ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000ft-lbs of fastening torque and 1400ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industrys most compact cordless high torque impact wrench at 8.39 in. in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials. 02233
$
262.34
Qty:
Part #:MILW2767-22
- The 2767 M18 FUEL high torque 1/2 in. impact wrench with friction ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000ft-lbs of fastening torque and 1400ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industrys most compact cordless high torque impact wrench at 8.39 in. in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials. 02240
$
479.45
Qty:
Part #:MILW2719-21
- The Milwaukee 2719 M18 FUEL HACKZALL is the fastest cutting and most powerful one-handed reciprocating saw. Utilizing a POWERSTATE brushless motor and a best in class 7/8 in. stroke length, the M18 FUEL HACKZALL cuts up to 50 percent faster than competitors. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides up to 4x lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M18 REDLITHIUM XC5.0 battery pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris. 02974
$
299.80
Qty:
Part #:MILW2853-20
- The M18 FUEL 1/4 in. impact driver is the fastest, most compact, and most powerful tool in its class. The POWERSTATE brushless motor delivers up to 2,000in-lbs of torque and up to 30 percent faster driving speed, increasing users productivity for the most demanding fasteners on the job. With the most compact tool at only 4.59 in. in length, users will have more access in tight spaces. The REDLINK Plus intelligence ensures maximum performance and protects from overloads, heating or over-discharge. The REDLITHIUM battery pack (not included) delivers more work per charger and more work over the life of the pack than competitors. The 4-mode DRIVE CONTROL provides greater control over output speed and power for greater versatility. Self-tapping screw mode provides faster installation time by reducing stripping of fasteners. 14427
$
144.00
Qty:
Part #:MILW2737-20
- The M18 FUEL D-handle jig saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18 FUEL D-handle jig saw leverages the POWERSTATE brushless motor and REDLINK Plus intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18 REDLITHIUM XC5.0 battery the M18 FUEL D-handle jig saw provides up to 105 linear feet of cutting in 3/4 in. laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with pin-detents at 0. 15. 30. and 45 as well as an LED light and on/off blower to keep the cut line visible while cutting. 15189
$
187.06
Qty:
Part #:MILW2737B-20
- The M18 FUEL barrel grip jig saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18 FUEL D-handle jig saw leverages the POWERSTATE brushless motor and REDLINK Plus intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18 REDLITHIUM XC5.0 battery the M18 FUEL D-handle jig saw provides up to 105 linear feet of cutting in 3/4 in. laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with pin-detents at 0. 15. 30. and 45 as well as an LED light and on/off blower to keep the cut line visible while cutting. 15363
$
187.06
Qty:
Part #:MILW2631-20
- The M18 brushless 7-1/4 in. circular saw delivers up to 40 percent more power than circular saws with brushed motors while providing up to 30 percent more run-time as well. The Milwaukee built motor, REDLINK electronics and REDLITHIUM XC5.0 battery provide more efficient power delivery, more power and fewer trips to the charger. With 5,000 RPM that 2631 provides smooth cutting and at only 9.0 lbs. it is lighter than most corded saws. The saw also features an integrated rafter hook, magnesium guards, an aluminum shoe and LED light. 30250
$
192.24
Qty:
Part #:MILW2767-22GG
- The M18 FUEL high torque impact wrench with friction ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft./lbs. of fastening torque and 1400 ft./lbs. of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industry's most compact cordless high torque impact wrench at 8.39 in. L, this tool allows for more access in tight spaces. 4-Mode drive control with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber over mold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials. 32292
$
639.00
Qty:
$
2.39
Qty:
$
3.56
Qty:
$
3.38
Qty:
$
4.89
Qty:
$
4.89
Qty:
$
14.77
Qty:
$
2.39
Qty:
Part #:HALCF32T8/865/ECO
- INSTANT/PROGRAMMED START TYPE 48 INCH NOMINAL LENGTH 25 CARTON STANDARD PACKAGE 32 W WATTAGE MEDIUM 2-PIN BASE TYPE 24000 LIFE IN HOUR T8 SHAPE DESIGNATION 6500 86 COLOR RENDERING INDEX 3050 LUMEN INITIAL INTENSITY ROHS COMPLIANT SIZE 1 INCH DIA X 48 INCH L BASE MATERIAL ALUMINUM MINIMUM STARTING TEMPERATURE -4 DEG C FREQUENCY RATING 60 HZ OPERATING POSITION UNIVERSAL APPLICATION PAINT STORE, HAIR SALON, RETAIL STORES, PRINT SHOP
$
2.39
Qty:
$
10.97
Qty:
$
14.77
Qty:
$
14.77
Qty:
$
5.02
Qty:
$
5.02
Qty:
Part #:HALCF54T5/841/HO/ECO/IC
- HIGH OUTPUT/PROGRAMMED START TYPE 46 INCH NOMINAL LENGTH 25 CARTON STANDARD PACKAGE 54 W WATTAGE MINIATURE 2-PIN BASE TYPE 24000 LIFE IN HOUR T5 SHAPE DESIGNATION 4100 86 COLOR RENDERING INDEX 5000 LUMEN INITIAL INTENSITY PROLUME ECO-SHIELD BRAND ROHS COMPLIANT SIZE 0.63 INCH DIA X 46 INCH L BASE MATERIAL ALUMINUM MAXIMUM AMBIENT TEMPERATURE 122 DEG C FREQUENCY RATING 60 HZ OPERATING POSITION UNIVERSAL APPLICATION COVE LIGHTING, DISPLAY LIGHTING, INDIRECT FIXTURES, HIGH BAY FIXTURE
$
4.36
Qty:
Part #:HALCF54T5/850/HO/ECO/IC
- HIGH OUTPUT/PROGRAMMED START TYPE 46 INCH NOMINAL LENGTH 25 CARTON STANDARD PACKAGE 54 W WATTAGE MINIATURE 2-PIN BASE TYPE 24000 LIFE IN HOUR T5 SHAPE DESIGNATION 5000 86 COLOR RENDERING INDEX 5000 LUMEN INITIAL INTENSITY ROHS COMPLIANT SIZE 0.63 INCH DIA X 46 INCH L BASE MATERIAL ALUMINUM MAXIMUM AMBIENT TEMPERATURE 122 DEG C FREQUENCY RATING 60 HZ OPERATING POSITION UNIVERSAL APPLICATION COVE LIGHTING, DISPLAY LIGHTING, INDIRECT FIXTURES, HIGH BAY FIXTURE
$
4.36
Qty:
Displaying: 1 - 24 of 24 Matching Items