7-in-1 Multi-Bit
Tools
View:
Active Filters :
Part #:MILW2615-21
- The most compact 18-volt right angle drill driver on the market. With a total profile length of just 3-3/4, the M18 Cordless Lithium-Ion Right Angle Drill is a compact, powerful solution for drilling and driving in tight spaces. It features the industrys first electronic clutch, with 12 torque settings and an LED indicator for fastening with complete control. It comes with the REDLITHIUM XC Extended Battery Pack and M18 and M12 multi-voltage charger, delivering more work per charge and more work over pack life than the competitors, even in extreme conditions. The onboard fuel gauge helps you monitor the charge precisely, so theres less downtime on the job, and a built-in LED Light illuminates the work surface. An extended multi-position paddle switch gives you ultimate comfort and convenience during prolonged use. Bullets REDLITHIUM Battery Technology Superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market REDLINK Intelligence Provides optimized performance and overload protection using total system communication between tool, battery and charger Innovative Electronic Clutch Delivers up to 150 in-lbs of torque with 11 settings plus drill mode for complete control in fastening applications 3/8-inch Single Sleeve Ratcheting Chuck Allows quick and easy bit changes and maximum grip Built-in LEDs Illuminate work surface and indicate clutch position 42214
$
257.95
Qty:
Part #:KLE31872
- CARBIDE TIPPED MATERIAL 4 PIECE(S) (3) CARBIDE HOLE CUTTER, (1) PILOT BIT CONTENT KLEIN BRAND CARBIDE HOLE CUTTER PART NUMBER 7/8 INCH 31852, 1-1/8 INCH 31856, 1-3/8 INCH 31860 CONDUIT/PIPE SIZE 1/2 TO 1 INCH
Part #:KLE31874
- FERROUS METAL, NON-FERROUS METAL CUT MATERIAL CARBIDE TIPPED BLADE MATERIAL YES SUPPLIED WITH PILOT DRILL KLEIN BRAND
$
7.98
Part #:KLE32303
-
14-in-1 Multi-Bit Adjustable Length Screwdriver
32303
Multi-bit screwdriver includes 13 different screwdriver bits and a 1/4-Inch nut driver
Industrial-strength bits that are conveniently housed in the handle
Adjust the length of the blade for easier access
Impact rated blade can be removed for use as an impact driver attachment
Stainless steel bit holder contains powerful rare earth magnets for securing bits and fasteners
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Part #:KLE32305
-
15-in-1 Multi-Bit Ratcheting Screwdriver
32305
Multi-Bit screwdriver features a durable ratcheting mechanism for faster and easier all-day driving
On-board storage of 14 different double-sided screwdriver bits and a 1/4-Inch nut driver
Industrial-strength bits that are conveniently housed in the handle
Collar sets ratchet direction at forward, fixed and reverse
Cushion-Grip handle for great torque and maximum comfort
Spin cap for optimum and precise control
Includes Phillips (#0, #1, #2, #3), Slotted (3/16-Inch, 1/4-Inch), Square (#1, #2), Torx® (T10, T15, T20, T25), and Combo (#1, #2) bits
TORX® is a registered trademark of Acument Intellectual Properties, LLC
Part #:KLE32307
-
27-in-1 Multi-Bit Tamperproof Screwdriver
32307
Multi-Bit screwdriver features convenient on-board storage of 26 different tamperproof bits and a 1/4-Inch nut driver
Barrel contains powerful rare earth magnets for securing bits and fasteners
Industrial-strength, double-sided bits that are conveniently housed in the handle eliminating the need for a bulky bit block
Stainless steel barrel provides great impact and wear resistance
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Includes the following tamper-proof bits Torx®, TORQ-SET®, Hex, and Spanner
TORQ-SET® is a registered trademark of Phillips Screw Co TORX® is a registered trademark of Acument Intellectual Properties, LLC
Part #:KLE32308
-
8-in-1 Multi-Bit Adjustable Length Stubby Screwdriver
32308
Multi-bit stubby screwdriver includes 7 different screwdriver bits and a 1/4-Inch nut driver
Compact driver reaches easily into tight spots
Industrial-strength bits that are conveniently housed in the handle
Adjust the length of the blade for easier access
Impact rated blade can be removed for use as an impact driver attachment
Stainless steel bit holder contains powerful rare earth magnets for securing bits and fasteners
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Part #:KLE32476
- PHILLIPS, SLOTTED TYPE CHROME PLATED FINISH 7-3/4 INCH OVERALL LENGTH 4 INCH SHANK LENGTH HEAT TREATED PROCESS CUSHION GRIP HANDLE, PRECISION, 5-IN-1 STYLE BLACK/YELLOW HANDLE COLOR 3/16 INCH, 9/32 INCH (SLOTTED), #1, #2 (PHILLIPS), 5/16 INCH (NUTDRIVER) TIP SIZE TEMPERED STEEL SHANK MATERIAL TIP-IDENT[R] BRAND APPLICABLE STANDARD ASME/ANSI
Part #:KLE32557
- PHILIPS, SLOTTED, SQUARE RECESS SCREWDRIVER SET TYPE 10 PIECE(S) PLASTIC HANDLE MATERIAL BLACK HANDLE COLOR (1) 3/16 INCH, (1) 1/4 INCH SLOTTED, (1) #1, (1) #2 PHILLIPS/SQUARE RECESS SCREWDRIVER, (1) 3/8 INCH HEX DRIVER, (1) 1/4 INCH, (1) 5/16 INCH, (1) 3/8 INCH NUTDRIVER SET CONTENT KLEIN BRAND HANDLE TYPE CUSHION GRIP SHANK LENGTH 2-61/64 INCH LENGTH 7.9 INCH SHANK MATERIAL HEAT TREATED TEMPERED CHROME PLATED STEEL APPLICABLE STANDARD ASME/ANSI
Part #:KLE32559
- PHILLIPS, SLOTTED TYPE CHROME PLATED FINISH 9-7/64 INCH OVERALL LENGTH 4-7/64 INCH SHANK LENGTH HEAT TREATED, TEMPERED PROCESS PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE STYLE BLACK HANDLE COLOR 3/16 INCH, 1/4 INCH (SLOTTED), #1, #2 (PHILLIPS), 1/4 INCH, 5/16 INCH (NUTDRIVER) TIP SIZE STEEL SHANK MATERIAL KLEIN BRAND APPLICABLE STANDARD ASME/ANSI
Part #:KLE53716
- SCREW POINT TYPE STEEL MATERIAL 54 INCH OVERALL LENGTH 3/8 INCH DRILL SIZE
Part #:KLE53717
- SCREW POINT TYPE STEEL MATERIAL 72 INCH OVERALL LENGTH 3/8 INCH DRILL SIZE
Part #:KLE53719
- SCREW POINT TYPE STEEL MATERIAL 54 INCH OVERALL LENGTH 3/4 INCH DRILL SIZE
Part #:KLE53720
- SCREW POINT TYPE STEEL MATERIAL 54 INCH OVERALL LENGTH 1 INCH DRILL SIZE
Part #:IDE36-311
- CARBIDE TIPPED MATERIAL 4 PIECE(S) CARRYING CASE PACKAGING TYPE 36-301/36-303/36-305 HOLE CUTTER, SMOOTHSTART 36-312 PILOT BIT CONTENT 7/8 INCH, 1 -1/8 INCH, 1-3/8 INCH HOLE SAW SIZE IDEAL BRAND HEX KEY SIZE 3 MILLIMETER
$
148.70
Displaying: 1 - 20 of 20 Matching Items