Cable Cleaning
Tools
View:
Active Filters :
Part #:3MCC-2
- COLORLESS COLOR CLEANING CABLE INSULATION, METAL, ELECTRICAL AND MECHANICAL PART APPLICATION CAN CONTAINER TYPE 144 DEG F (CLOSED CUP), 165 DEG F (OPEN CUP) FLASH POINT LIQUID CLEANER TYPE 3M BRAND ROHS COMPLIANT BOILING POINT 380 TO 480 DEG F VAPOR PRESSURE 0.2 MILLIMETER HG SPECIFIC GRAVITY 0.76 INCLUDES (3) UNSATURATED CABLE CLEANING PAD AND (1) NON-CONDUCTIVE GRIT ABRASIVE CLOTH CC MODEL
$
28.77
Qty:
Part #:CRC02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3 HECTOPASCAL VAPOR DENSITY GREATER THAN 1 (AIR EQUAL TO 1) VOC CONTENT 649.9 GPL OVERALL DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF H1
$
12.91
Qty:
Part #:KLETI250
-
Thermal Imager has over 10,000 pixels to troubleshoot hot and cold spots
Adjustable emissivity from 0.10 to 0.99
Store and share images with optional microSD® Card
User selectable high and low temperature alarms from -4 to 752-Degree Fahrenheit (-20 to 400-Degree Celsius)
Select color palettes to best capture the event
Rechargeable lithium-ion battery
Includes thermal imager, micro-USB charging cable, carrying case, and instructions
Qty:
Part #:KLE69410
- 41 INCH MULTIMETER, CLAMP METER APPLICATION RIGHT ANGLE CONNECTOR TYPE 1000 VOLT (CAT III), 600 VOLT (CAT IV) VOLTAGE RATING (1) PAIR OF UNIVERSAL TEST LEAD, (1) SET OF ALLIGATOR CLIP INCLUSION BLACK, RED INSULATION COLOR CATEGORY III, IV SAFETY RATING KLEIN BRAND USED ON LEAD STORAGE COMPARTMENT ON MM100/MM200/MM300/MM400/MM500/MM600/MM700/MM1000/MM1300/MM2000/MM2300/MM5000/MM6000 MULTIMETER, CL200/CL1000/CL1200/CL1300/CL2000/CL2200/CL2300/CL2500 CLAMP METER
Qty:
Qty:
Part #:KLED2000-9NECR
- HOT-RIVETED JOINT TYPE STEEL MATERIAL POLISHED BLACK OXIDE FINISH 9-3/8 INCH OVERALL LENGTH 1-19/32 INCH JAW LENGTH 1-1/4 INCH JAW WIDTH CUT ACSR, SCREW, NAIL AND MOST HARDENED WIRE APPLICATION FORGED, PRECISION MACHINED, INDUCTION HARDENED, TEMPERED PROCESS PLASTIC HANDLE MATERIAL ROYAL BLUE HANDLE COLOR NEW ENGLAND NOSE, KNURLED JAW TYPE KLEIN BRAND JAW THICKNESS 5/8 INCH KNIFE LENGTH 25/32 INCH 2000 MODEL
Qty:
Part #:DOTR418B
- STRAIGHT BACK TYPE HEAT TREATED TEMPERED BI-METAL MATERIAL 4 INCH BLADE LENGTH 5/8 INCH BLADE WIDTH 4 BLADE LENGTH - DECIMAL .625 BLADE WIDTH - DECIMAL 4 BLADE LENGTH - FRACTIONAL 5/8 BLADE WIDTH - FRACTIONAL METAL CUT MATERIAL 0.035 INCH BLADE THICKNESS 18 TEETH PER INCH .035 BLADE THICKNESS - DECIMAL DOTTIE. BRAND TOOTH HARDNESS 65 TO 67 RC 5 PER POUCH CUT MATERIAL THICKNESS 18 GAUGE TO 1/8 INCH SHANK SIZE 1/2 INCH BLADE LENGTH - DECIMAL - UOM IN BLADE THICKNESS - DECIMAL - UOM IN BLADE WIDTH - DECIMAL - UOM IN
$
1.86
Qty:
Part #:DOTR424B
- STRAIGHT BACK TYPE HEAT TREATED TEMPERED BI-METAL MATERIAL 4 INCH BLADE LENGTH 5/8 INCH BLADE WIDTH 4 BLADE LENGTH - DECIMAL .625 BLADE WIDTH - DECIMAL 4 BLADE LENGTH - FRACTIONAL 5/8 BLADE WIDTH - FRACTIONAL METAL CUT MATERIAL 0.035 INCH BLADE THICKNESS 24 TEETH PER INCH .035 BLADE THICKNESS - DECIMAL DOTTIE. BRAND TOOTH HARDNESS 65 TO 67 RC 5 PER POUCH CUT MATERIAL THICKNESS 18 GAUGE AND UNDER SHANK SIZE 1/2 INCH BLADE LENGTH - DECIMAL - UOM IN BLADE THICKNESS - DECIMAL - UOM IN BLADE WIDTH - DECIMAL - UOM IN
$
1.86
Qty:
Part #:DOTR610B7
- STRAIGHT BACK TYPE BI-METAL MATERIAL POWDER COATED FINISH 6 INCH BLADE LENGTH 3/4 INCH BLADE WIDTH NON-FERROUS METAL, NON-METAL CUT MATERIAL HEAT TREATED PROCESS 0.035 INCH BLADE THICKNESS 10 TEETH PER INCH TEETH HARDNESS 66 TO 68 RC
$
2.54
Qty:
Part #:DOTR618B7
- STRAIGHT BACK TYPE BI-METAL MATERIAL POWDER COATED FINISH 6 INCH BLADE LENGTH 3/4 INCH BLADE WIDTH METAL CUT MATERIAL HEAT TREATED PROCESS 0.035 INCH BLADE THICKNESS 18 TEETH PER INCH TEETH HARDNESS 66 TO 68 RC
$
2.54
Qty:
Part #:DOTR624B7
- STRAIGHT BACK TYPE BI-METAL MATERIAL POWDER COATED FINISH 6 INCH BLADE LENGTH 3/4 INCH BLADE WIDTH METAL CUT MATERIAL HEAT TREATED PROCESS 0.035 INCH BLADE THICKNESS 24 TEETH PER INCH TEETH HARDNESS 66 TO 68 RC
$
2.54
Qty:
Displaying: 1 - 11 of 11 Matching Items