Cordless Right Angle Drill
Tools
View:
Active Filters :
- Main Category: Tools
- Type: Cordless Right Angle Drill Latex-Based Intumescent Firestop Sealant Reciproblade Screwdriver Set
Part #:3MCP-25WBPLUS
- UL 1479, ULC, FM, WHB (CANADA AND US), CAN/ULC S115 APPROVAL 12 STANDARD PACKAGE 10.1 FLUID OUNCE QUANTITY PHYSICAL FORM SOLID/PASTE BOILING POINT 100 DEG C COLOR RED SPECIFIC GRAVITY 1.35 TENSILE STRENGTH 85 PSI VAPOR PRESSURE 17.5 MILLIMETER OF MERCURY TEMPERATURE RATING 40 TO 122 DEG F APPLICATION HVAC DUCT AND VENT, METALLIC AND NON-METALLIC PIPE, BLANK OPENING, SINGLE AND BUNDLED CABLE, INSULATED PIPE, PIPE AND CABLE THROUGH-PENETRATION, BUSWAY, COMBO, RATED WALL, FLOOR AND FLOOR-CEILING ASSEMBLY, STATIC CONSTRUCTION JOINT
$
10.88
Qty:
Part #:MILW2615-21
- The most compact 18-volt right angle drill driver on the market. With a total profile length of just 3-3/4, the M18 Cordless Lithium-Ion Right Angle Drill is a compact, powerful solution for drilling and driving in tight spaces. It features the industrys first electronic clutch, with 12 torque settings and an LED indicator for fastening with complete control. It comes with the REDLITHIUM XC Extended Battery Pack and M18 and M12 multi-voltage charger, delivering more work per charge and more work over pack life than the competitors, even in extreme conditions. The onboard fuel gauge helps you monitor the charge precisely, so theres less downtime on the job, and a built-in LED Light illuminates the work surface. An extended multi-position paddle switch gives you ultimate comfort and convenience during prolonged use. Bullets REDLITHIUM Battery Technology Superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market REDLINK Intelligence Provides optimized performance and overload protection using total system communication between tool, battery and charger Innovative Electronic Clutch Delivers up to 150 in-lbs of torque with 11 settings plus drill mode for complete control in fastening applications 3/8-inch Single Sleeve Ratcheting Chuck Allows quick and easy bit changes and maximum grip Built-in LEDs Illuminate work surface and indicate clutch position 42214
$
257.95
Qty:
Part #:KLE32314
-
14-in-1 Precision Screwdriver/ Nut Driver
32314
Precision screwdriver and integrated nut drivers include 14 of the most common sizes in one tool
Spin cap offers optimum and precise control
Industrial-strength heat treated bits
Cushion-Grip handle for maximum comfort
Includes sizes Phillips #00, #0 Slotted 3/32-Inch, 1/8-Inch Tamperproof Torx® T7, T8, T10, T15 Hex 9/64-Inch, 5/32-Inch, 3/16-Inch, 7/32-Inch, 1/4-Inch, 5/16-Inch
Interchangeable steel shaft for fast, easy bit changes
Sizes are etched into integrated barrels and bits
TORX® is a registered trademark of Acument Intellectual Properties, LLC
Qty:
Part #:KLE32717
-
All-in-1 Precision Screwdriver Set with Case
32717
Precision screwdriver set includes 39 bits for various applications including repair of most Apple® products
Powerful magnets inside barrel to better retain bits, as well as pick-up and hold fasteners
Reversible barrel has standard and extended-reach ends
Compact carrying case features a stay-shut latch and extra-long bits for easier access
Spin cap offers optimum and precise control
Industrial-strength heat treated bits
Cushion-Grip handles for maximum comfort
Apple® is registered trademarks of Apple Inc TORX® is a registered trademark of Acument Intellectual Properties, LLC Tri-Wing® is a registered trademark of Phillips Screw Company
Qty:
Part #:DOTD151
- PHILIPS, SLOTTED, SQUARE, STAR, HEX TYPE 15 PIECE(S) GREEN HANDLE COLOR #0 AND #3, #1 AND #2 PHILLIPS, #0 AND #3, #1 AND #2 SQUARE, T10 AND T15, T20 AND T25 STAR, #4 AND #6 SLOTTED BITS, 1/4 INCH HEX SET CONTENT
$
22.96
Qty:
Part #:DOTR418B
- STRAIGHT BACK TYPE HEAT TREATED TEMPERED BI-METAL MATERIAL 4 INCH BLADE LENGTH 5/8 INCH BLADE WIDTH 4 BLADE LENGTH - DECIMAL .625 BLADE WIDTH - DECIMAL 4 BLADE LENGTH - FRACTIONAL 5/8 BLADE WIDTH - FRACTIONAL METAL CUT MATERIAL 0.035 INCH BLADE THICKNESS 18 TEETH PER INCH .035 BLADE THICKNESS - DECIMAL DOTTIE. BRAND TOOTH HARDNESS 65 TO 67 RC 5 PER POUCH CUT MATERIAL THICKNESS 18 GAUGE TO 1/8 INCH SHANK SIZE 1/2 INCH BLADE LENGTH - DECIMAL - UOM IN BLADE THICKNESS - DECIMAL - UOM IN BLADE WIDTH - DECIMAL - UOM IN
$
1.86
Qty:
Part #:DOTR424B
- STRAIGHT BACK TYPE HEAT TREATED TEMPERED BI-METAL MATERIAL 4 INCH BLADE LENGTH 5/8 INCH BLADE WIDTH 4 BLADE LENGTH - DECIMAL .625 BLADE WIDTH - DECIMAL 4 BLADE LENGTH - FRACTIONAL 5/8 BLADE WIDTH - FRACTIONAL METAL CUT MATERIAL 0.035 INCH BLADE THICKNESS 24 TEETH PER INCH .035 BLADE THICKNESS - DECIMAL DOTTIE. BRAND TOOTH HARDNESS 65 TO 67 RC 5 PER POUCH CUT MATERIAL THICKNESS 18 GAUGE AND UNDER SHANK SIZE 1/2 INCH BLADE LENGTH - DECIMAL - UOM IN BLADE THICKNESS - DECIMAL - UOM IN BLADE WIDTH - DECIMAL - UOM IN
$
1.86
Qty:
Part #:DOTR610B7
- STRAIGHT BACK TYPE BI-METAL MATERIAL POWDER COATED FINISH 6 INCH BLADE LENGTH 3/4 INCH BLADE WIDTH NON-FERROUS METAL, NON-METAL CUT MATERIAL HEAT TREATED PROCESS 0.035 INCH BLADE THICKNESS 10 TEETH PER INCH TEETH HARDNESS 66 TO 68 RC
$
2.54
Qty:
Part #:DOTR618B7
- STRAIGHT BACK TYPE BI-METAL MATERIAL POWDER COATED FINISH 6 INCH BLADE LENGTH 3/4 INCH BLADE WIDTH METAL CUT MATERIAL HEAT TREATED PROCESS 0.035 INCH BLADE THICKNESS 18 TEETH PER INCH TEETH HARDNESS 66 TO 68 RC
$
2.54
Qty:
Part #:DOTR624B7
- STRAIGHT BACK TYPE BI-METAL MATERIAL POWDER COATED FINISH 6 INCH BLADE LENGTH 3/4 INCH BLADE WIDTH METAL CUT MATERIAL HEAT TREATED PROCESS 0.035 INCH BLADE THICKNESS 24 TEETH PER INCH TEETH HARDNESS 66 TO 68 RC
$
2.54
Qty:
Displaying: 1 - 10 of 10 Matching Items