Electrical Tester
Tools
View:
Active Filters :
Part #:KLE32303
-
14-in-1 Multi-Bit Adjustable Length Screwdriver
32303
Multi-bit screwdriver includes 13 different screwdriver bits and a 1/4-Inch nut driver
Industrial-strength bits that are conveniently housed in the handle
Adjust the length of the blade for easier access
Impact rated blade can be removed for use as an impact driver attachment
Stainless steel bit holder contains powerful rare earth magnets for securing bits and fasteners
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Qty:
Part #:KLE32305
-
15-in-1 Multi-Bit Ratcheting Screwdriver
32305
Multi-Bit screwdriver features a durable ratcheting mechanism for faster and easier all-day driving
On-board storage of 14 different double-sided screwdriver bits and a 1/4-Inch nut driver
Industrial-strength bits that are conveniently housed in the handle
Collar sets ratchet direction at forward, fixed and reverse
Cushion-Grip handle for great torque and maximum comfort
Spin cap for optimum and precise control
Includes Phillips (#0, #1, #2, #3), Slotted (3/16-Inch, 1/4-Inch), Square (#1, #2), Torx® (T10, T15, T20, T25), and Combo (#1, #2) bits
TORX® is a registered trademark of Acument Intellectual Properties, LLC
Qty:
Part #:KLE32307
-
27-in-1 Multi-Bit Tamperproof Screwdriver
32307
Multi-Bit screwdriver features convenient on-board storage of 26 different tamperproof bits and a 1/4-Inch nut driver
Barrel contains powerful rare earth magnets for securing bits and fasteners
Industrial-strength, double-sided bits that are conveniently housed in the handle eliminating the need for a bulky bit block
Stainless steel barrel provides great impact and wear resistance
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Includes the following tamper-proof bits Torx®, TORQ-SET®, Hex, and Spanner
TORQ-SET® is a registered trademark of Phillips Screw Co TORX® is a registered trademark of Acument Intellectual Properties, LLC
Qty:
Part #:KLE32308
-
8-in-1 Multi-Bit Adjustable Length Stubby Screwdriver
32308
Multi-bit stubby screwdriver includes 7 different screwdriver bits and a 1/4-Inch nut driver
Compact driver reaches easily into tight spots
Industrial-strength bits that are conveniently housed in the handle
Adjust the length of the blade for easier access
Impact rated blade can be removed for use as an impact driver attachment
Stainless steel bit holder contains powerful rare earth magnets for securing bits and fasteners
Cushion-Grip handle for maximum comfort
Spin cap for optimum and precise control
Qty:
Part #:KLE32476
- PHILLIPS, SLOTTED TYPE CHROME PLATED FINISH 7-3/4 INCH OVERALL LENGTH 4 INCH SHANK LENGTH HEAT TREATED PROCESS CUSHION GRIP HANDLE, PRECISION, 5-IN-1 STYLE BLACK/YELLOW HANDLE COLOR 3/16 INCH, 9/32 INCH (SLOTTED), #1, #2 (PHILLIPS), 5/16 INCH (NUTDRIVER) TIP SIZE TEMPERED STEEL SHANK MATERIAL TIP-IDENT[R] BRAND APPLICABLE STANDARD ASME/ANSI
Qty:
Qty:
Part #:KLE32500MAG
-
11-in-1 Magnetic Screwdriver / Nut Driver
32500MAG
Integrated screwdriver / nut driver magnetic barrel holds 8 popular tips and converts to 3 nut driver sizes
Strong, rare earth magnets securely hold bits and fasteners
Industrial strength heat treated bits
Interchangeable shaft for quick and easy switch out
Cushion-Grip handle for greater torque and comfort
Includes tips 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX®, and #1 and #2 square recess
Blast-finished bit tips provide a firm hold and reduce cam-out
The following replacement bits are available see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX)
Qty:
Qty:
Part #:KLE44130
- FOLDING, HEAVY DUTY TYPE 7-1/8 INCH OVERALL LENGTH 440A STAINLESS STEEL BLADE MATERIAL ORANGE/BLACK RUBBER HANDLE MATERIAL CLOSED LENGTH 4-1/8 INCH INCLUDES (3) BLADE
Qty:
Part #:KLE44133
- HEAVY DUTY, RETRACTABLE TYPE 7 INCH OVERALL LENGTH STEEL BLADE MATERIAL RUBBER GRIP HANDLE MATERIAL KLEIN BRAND CLOSED LENGTH 6.875 INCH
Qty:
Part #:KLE44101
- ROUND POINT TYPE 2-7/16 BLADE LENGTH 0.025 INCH BLADE THICKNESS KLEIN BRAND
$
3.98
Qty:
Part #:KLENCVT5KIT
-
Electrical Tester Kit with Dual-Range NCVT and GFCI Receptacle Tester
NCVT5KIT
NCVT-5A provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, as well as AC voltage in security, entertainment, communications, environmental control and irrigation systems
Dual-range testing select 12 to 1000V AC which is perfect for low voltage systems such as doorbells, environmental control or irrigation systems, or select 70 to 1000V AC which is perfect for detecting systems such as electrical mains supply
NCVT-5A delivers simultaneous visual and audible voltage indicators when AC voltage is detected
Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source it is
Bright integrated laser pointer for identifying objects of interest at distance on the jobsite
RT210 detects the most common wiring problems in standard and GFCI receptacles
Works on GFCI outlets and confirms operation of the ground fault protective device
Conditions the RT210 indicates open ground, reverse polarity, open hot, open neutral, hot/ground reversed
Qty:
Part #:KLECL120KIT
-
Clamp Meter Electrical Test Kit
CL120KIT
Measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads
Detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
CAT III 600V, Class 2, Double insulation safety rating
AC Auto-Ranging 400 amp digital clamp meter
Backlit display for clear readings
Includes a case, test leads and batteries
Qty:
Part #:KLECL320
-
HVAC Digital Clamp Meter, AC Auto-Ranging 400 Amp
CL320
Clamp Meter measures AC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple
Non-contact voltage tester integrated into the clamp jaw
Backlit LCD for ease of viewing in low light
Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
Measures temperature with a K-Type thermocouple probe
Auto-Range, Data Hold, and Max/Min value
Auto-power off after 10 minutes to conserve battery life
Includes a carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 3 x AAA batteries
Low battery indicator and easily accessible battery compartment
Built to withstand a 6.6-Foot (2 m) drop
CAT III 600V, Class 2, Double insulation safety rating
Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations
Qty:
Part #:KLECL390
-
AC/DC Digital Clamp Meter, Auto-Ranging 400 Amp
CL390
Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
Non-contact voltage tester integrated into the clamp jaw
High-visibility reverse contrast LCD display for improved view ability in all ambient lighting conditions
Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
Measures AC/DC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple
Measures temperature with a K-Type thermocouple probe
Max/Min, Rel/Zero and Data Hold capability
Auto-power off after 10 minutes to conserve battery life
Includes a carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 3 x AAA batteries
Low battery indicator and easily accessible battery compartment
Built to withstand a 6.6-Foot (2 m) drop
CAT III 600V, Class 2, Double insulation safety rating
Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations
Qty:
Part #:KLECL220
-
Digital Clamp Meter, AC Auto-Ranging 400 Amp with Temp
CL220
Measures AC current and NCVT via clamp and AC/DC voltage, resistance, and continuity via test-leads, and temperature with thermocouple
Non-contact voltage tester integrated into the clamp jaw
Backlit LCD for ease of viewing in low light
Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
Measures temperature with a K-Type thermocouple probe
Auto-Range, Hold, Data Hold, and Max value
Auto-power off after 10 minutes to conserve battery life
Includes a carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 3 x AAA batteries
Low battery indicator and easily accessible battery compartment
Built to withstand a 6.6-Foot (2 m) drop
CAT III 600V, Class 2, Double insulation safety rating
Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations
Qty:
Part #:IDE30-430
- 9-1/2 INCH OVERALL LENGTH CUTTING APPLICATION YELLOW HANDLE COLOR NEW ENGLAND NOSE JAW TYPE SMART-GRIP[TM] BRAND WITH CRIMPING DIE
$
40.57
Qty:
Displaying: 1 - 18 of 18 Matching Items