Ul 489,Hacr Rated
Ul 217, Nfpa 72, (Chapter 11) the State of California Fire Marshall, Nfpa 101 (One and Two Family Dwellings), Federal Housing Authority (Fha), Housing and Urban Development (Hud)
View:
Active Filters :
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Part #:CG012450
- STRAIGHT TYPE ZINC PLATED STEEL (BODY), NEOPRENE (GLAND) MATERIAL UL 514B APPROVAL 1/2 INCH THREAD SIZE 0.35 TO 0.45 INCH CORD SIZE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-406E TEMPERATURE RATING 105 DEG C PACKAGING QUANTITY 100
$
6.31
Qty:
Part #:CG012560
- STRAIGHT TYPE ZINC PLATED STEEL (BODY), NEOPRENE (GLAND) MATERIAL UL 514B APPROVAL 1/2 INCH THREAD SIZE 0.45 TO 0.56 INCH CORD SIZE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-406E TEMPERATURE RATING 105 DEG C PACKAGING QUANTITY 100
$
6.31
Qty:
Part #:CG034750
- STRAIGHT TYPE ZINC PLATED STEEL (BODY), NEOPRENE (GLAND) MATERIAL UL 514B APPROVAL 3/4 INCH THREAD SIZE 0.65 TO 0.75 INCH CORD SIZE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-406E TEMPERATURE RATING 105 DEG C PACKAGING QUANTITY 50
$
5.19
Qty:
Part #:CRS670
- BLANK, SCREW, WEDGENUT TYPE SHEET STEEL (COVER), STAINLESS STEEL (SCREW) MATERIAL 7 INCH UL 514B, CSA C22.2 APPROVAL 2 INCH TRADE SIZE FORM 7 FORM TYPE COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION
$
23.41
Qty:
Part #:CG034250
- STRAIGHT TYPE ZINC PLATED STEEL (BODY), NEOPRENE (GLAND) MATERIAL UL 514B APPROVAL 3/4 INCH THREAD SIZE 0.15 TO 0.25 INCH CORD SIZE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-406E TEMPERATURE RATING 105 DEG C PACKAGING QUANTITY 50
$
518.90
Qty:
Part #:CRSLL67
- ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 8.125 INCH LENGTH X 3.125 INCH WIDTH X 4.125 INCH HEIGHT SIZE RIGID CONDUIT USED ON 2 INCH HUB SIZE THREADED INSTALLATION LL CONFIGURATION 2 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE 90 DEGREE HUB LOCATION FORM 7 FORM TYPE LEFT SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D LL MODEL
$
132.71
Qty:
Part #:CRSLR37
- ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 6 INCH LENGTH X 1.875 INCH WIDTH X 2.75 INCH HEIGHT SIZE RIGID CONDUIT USED ON 1 INCH HUB SIZE THREADED INSTALLATION LR CONFIGURATION 2 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE 90 DEGREE HUB LOCATION FORM 7 FORM TYPE RIGHT SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D LR MODEL
$
23.63
Qty:
Part #:CRSLR67
- ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 8.125 INCH LENGTH X 3.125 INCH WIDTH X 4.125 INCH HEIGHT SIZE RIGID CONDUIT USED ON 2 INCH HUB SIZE THREADED INSTALLATION LR CONFIGURATION 2 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE 90 DEGREE HUB LOCATION FORM 7 FORM TYPE RIGHT SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D LR MODEL
$
132.71
Qty:
Part #:CRST27
- ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 6.25 INCH LENGTH X 2 INCH WIDTH X 2.625 INCH HEIGHT SIZE RIGID CONDUIT USED ON 3/4 INCH HUB SIZE THREADED INSTALLATION T CONFIGURATION 3 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE TEE HUB LOCATION FORM 7 FORM TYPE SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D T MODEL
$
32.63
Qty:
Part #:CG012350
- STRAIGHT TYPE ZINC PLATED STEEL (BODY), NEOPRENE (GLAND) MATERIAL UL 514B APPROVAL 1/2 INCH THREAD SIZE 0.25 TO 0.35 INCH CORD SIZE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-406E TEMPERATURE RATING 105 DEG C PACKAGING QUANTITY 100
$
5.13
Qty:
Part #:CG034850
- STRAIGHT TYPE ZINC PLATED STEEL (BODY), NEOPRENE (GLAND) MATERIAL UL 514B APPROVAL 3/4 INCH THREAD SIZE 0.75 TO 0.85 INCH CORD SIZE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-406E TEMPERATURE RATING 105 DEG C PACKAGING QUANTITY 50
$
5.11
Qty:
Part #:CUTCHF130
- THERMAL MAGNETIC, COMMON TRIP TYPE 0.75 INCH W X 3 INCH D X 3 INCH H SIZE 240 MAX. AC VOLTAGE RATING UL 489, CSA C22.2 APPROVAL 120/240 VAC VOLTAGE RATING 10 KILOAMPERE AT 120/240 VAC INTERRUPTING RATING 30 AMPERE AT 40 DEG C CURRENT RATING 1 POLE(S) PLUG-ON, ALUMINUM/COPPER WIRE TERMINAL TYPE CH FRAME TYPE TYPE CHF MODEL
$
11.47
Qty:
Displaying: 1 - 19 of 19 Matching Items