Ul 217, Nfpa 72, (Chapter 11) the State of California Fire Marshall, Nfpa 101 (One and Two Family Dwellings), Federal Housing Authority (Fha), Housing and Urban Development (Hud)
Ccsaus Certified, Ul Listed, Ul Recognized, Hvacr, Nec
View:
Part #:BRKFG250B
- SMOKE ALARM TYPE DUAL IONIZATION OPERATION TYPE UL 217 APPROVAL 85 DB AT 10 FT HORN TYPE 9 V BATTERY VOLTAGE RATING/SOURCE RED LED INDICATING DC POWER LED/STROBE TYPE BRK[R] BRAND SIZE 4.25 INCH DIA X 1.6 INCH H CARBON ZINC BATTERY FG250 MODEL
$
8.18
Qty:
$
39.46
Qty:
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Part #:INTMFF60MC
- COMMERCIAL TYPE 1-3/4 INCH WIDTH X 1-1/4 INCH DEPTH X 4-1/8 INCH HEIGHT SIZE BRUSHED METAL PLATE, WHITE KNOB COLOR WITHOUT HOLD OPERATION TYPE UL, CSA (CANADA AND US) APPROVAL FAN, LIGHTING, MOTOR, HEATER APPLICATION WALL MOUNTING 32 TO 104 DEG F OPERATING TEMPERATURE SPST SWITCH TYPE 20 AMP AT 125 VOLT AC 50/60 HERTZ (RESISTIVE), 10 AMP AT 250/277 VOLT AC 50/60 HERTZ (RESISTIVE), 7 AMP AT 125 VOLT AC (TUNGSTEN) CONTACT CURRENT RATING 1 HP AT 125 VOLT AC 50/60 HERTZ, 2 HP AT 250 VOLT AC 50/60 HERTZ CONTACT POWER RATING 60 MINUTE TIME CYCLE INTERMATIC BRAND ROHS COMPLIANT VOLTAGE RATING 125 TO 277 VOLT AC AT 60 HERTZ FF MODEL
$
45.28
Qty:
Part #:INTMFF5M
- COMMERCIAL TYPE 1-3/4 INCH W X 1-1/4 INCH D X 4-1/8 INCH H SIZE BRUSHED METAL WALL PLATE, WHITE KNOB COLOR WITHOUT HOLD OPERATION TYPE UL (CANADA AND US), CSA (CANADA AND US) APPROVAL FAN, LIGHTING, MOTOR, HEATER APPLICATION WALL MOUNTING 32 TO 104 DEG F OPERATING TEMPERATURE SPST SWITCH TYPE 20 AMPERE AT 125 VAC 50/60 HZ, 10 AMPERE AT 250/277 VAC 50/60 HZ (RESISTIVE), 7 AMPERE AT 125 VAC 50/60 HZ (TUNGSTEN) CONTACT CURRENT RATING 1 HP AT 125 VAC 50/60 HZ, 2 HP AT 250 VAC 50/60 HZ CONTACT POWER RATING 5 MIN TIME CYCLE ROHS COMPLIANT FF MODEL
$
46.48
Qty:
Part #:CUTCHSUR42L225L2
- MAIN LUG TYPE 14.31 INCH W X 3.88 INCH D X 39 INCH H SIZE 42 MAX. NUMBER OF CIRCUITS UL APPROVAL 120/240 VAC VOLTAGE RATING 225 AMPERE CURRENT RATING FLUSH/SURFACE COVER TYPE NEMA 1, INDOOR ENCLOSURE TYPE 1 PHASE 3 WIRE CIRCUIT CONFIGURATION TWIN NEUTRAL TYPE BOTTOM/TOP FEED LOCATION SILVER FLASH PLATED COPPER BUS MATERIAL L ENCLOSURE SIZE DESIGNATION 2 AWG TO 300 KCMIL MAIN WIRE SIZE CUTLER-HAMMER[R] BRAND INCLUDES FACTORY INSTALLED SURGE SUPPRESSION, GROUND BAR CH MODEL
$
1,216.07
Qty:
Displaying: 1 - 8 of 8 Matching Items