Ul, Csa
Iec 60900 and Astm F1505
View:
Active Filters :
- Standard: Iec 60900 and Astm F1505 Ul, Csa Ul217/ul2034
$
57.92
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:KLE33532-INS
- PHILLIPS, CABINET SCREWDRIVER SET TYPE 2 PIECE(S) HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL BLACK HANDLE COLOR (1) #2 PROFILATED PHILLIPS, (1) 1/4 INCH CABINET SCREWDRIVER SET CONTENT KLEIN BRAND HANDLE TYPE DUAL INSULATED CUSHION GRIP BLADE MATERIAL INDUCTION HARDENED STEEL APPLICATION WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE200028EINS
- HOT-RIVETED JOINT, INSULATED TYPE STEEL MATERIAL 8-1/4 INCH OVERALL LENGTH 13/16 INCH JAW LENGTH 1-3/16 INCH JAW WIDTH CUTS ACSR, SCREWS, NAILS, MOST HARDENED WIRE APPLICATION INDUCTION HARDENED (BODY), FORGED (HANDLE) PROCESS STEEL HANDLE MATERIAL ORANGE/GRAY HANDLE COLOR DIAGONAL, TAPERED NOSE JAW TYPE 2000 SERIES[TM] BRAND HANDLE LENGTH 6-3/4 INCH JAW THICKNESS 7/16 INCH KNIFE LENGTH STANDARD APPLICABLE STANDARD IEC 60900, ASTM F1505
Qty:
Part #:KLE602-4-INS
- CABINET TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR 1/4 INCH TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE603-4-INS
- PHILLIPS TYPE 8-5/16 INCH OVERALL LENGTH 4 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:KLE6037INS
- PHILLIPS TYPE 11-5/16 INCH OVERALL LENGTH 7 INCH SHANK LENGTH ROUND SHANK TYPE ASTM F1505 MATERIAL SPECIFICATION HIGH-DIELECTRIC PLASTIC HANDLE MATERIAL CUSHION GRIP HANDLE, INSULATED STYLE BLACK HANDLE COLOR #2 TIP SIZE TOOL STEEL SHANK MATERIAL KLEIN BRAND BLADE MATERIAL INDUCTION HARDENED STEEL PROTECTION VOLTAGE RATING 1000 VOLT APPLICATION FOR WORK NEAR ENERGIZED SOURCE APPLICABLE STANDARD IEC 60900
Qty:
Part #:OLK-3RG
- NEOPRENE MATERIAL UL, CSA APPROVAL SCREW ON COVER TYPE 1 INCH TRADE SIZE SERIES O FORM TYPE HUBBELL[R] BRAND O MODEL
$
9.93
Qty:
Part #:OL-6-RG
- NEOPRENE MATERIAL UL, CSA APPROVAL SCREW ON COVER TYPE 2 INCH TRADE SIZE SERIES O FORM TYPE HUBBELL[R] BRAND O MODEL
$
14.93
Qty:
Part #:CUTTP274
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (5) 1/2 INCH CONDUIT BOTTOM, (4) 1/2 INCH CONDUIT SIDE KNOCKOUT SIZE 9 KNOCKOUT(S) (5) BOTTOM, (4) SIDE KNOCKOUT LOCATION NONE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
2.82
Qty:
Part #:CUTTP278
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (3) 1/2 INCH CONDUIT BOTTOM, (2) 3/4 INCH CONDUIT BOTTOM, (2) 1/2 INCH CONDUIT SIDE, (2) 3/4 INCH CONDUIT SIDE KNOCKOUT SIZE 9 KNOCKOUT(S) (5) BOTTOM, (4) SIDE KNOCKOUT LOCATION NONE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
2.29
Qty:
Part #:CUTTP276
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (3) 1/2 INCH CONDUIT BOTTOM, (2) 3/4 INCH CONDUIT BOTTOM, (4) 3/4 INCH CONDUIT SIDE KNOCKOUT SIZE 9 KNOCKOUT(S) (5) BOTTOM, (4) SIDE KNOCKOUT LOCATION NONE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.91
Qty:
Part #:CUTTP284
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL, CSA APPROVAL 4 INCH DIAMETER 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (4) 1/2 INCH CONDUIT SIDES KNOCKOUT SIZE 4 KNOCKOUT(S)
$
3.34
Qty:
Part #:CUTTP286
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL, CSA APPROVAL 4 INCH DIAMETER 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (2) 1/2 INCH CONDUIT SIDES, (2) 3/4 INCH CONDUIT SIDES KNOCKOUT SIZE 4 KNOCKOUT(S)
$
3.39
Qty:
Part #:OLK-1RG
- NEOPRENE MATERIAL UL, CSA APPROVAL SCREW ON COVER TYPE 1/2 INCH TRADE SIZE SERIES O FORM TYPE HUBBELL[R] BRAND O MODEL
$
8.43
Qty:
Part #:OLK-2RG
- NEOPRENE MATERIAL UL, CSA APPROVAL SCREW ON COVER TYPE 3/4 INCH TRADE SIZE SERIES O FORM TYPE HUBBELL[R] BRAND O MODEL
$
0.66
Qty:
Part #:OL-10
- SCREW TYPE COPPER FREE ALUMINUM MATERIAL 3 15/16 INCH UL, CSA APPROVAL 1/2 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL STAINLESS STEEL WIDTH 1 3/8 INCH HEIGHT 3/8 INCH O MODEL
$
5.49
Qty:
Part #:OL-20
- SCREW TYPE COPPER FREE ALUMINUM MATERIAL 4 5/8 INCH UL, CSA APPROVAL 3/4 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL STAINLESS STEEL WIDTH 1 5/8 INCH HEIGHT 3/8 INCH O MODEL
$
8.43
Qty:
Part #:OL-450
- SCREW TYPE COPPER FREE ALUMINUM MATERIAL 7 3/16 INCH UL, CSA APPROVAL 1 1/4 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL STAINLESS STEEL WIDTH 2 5/8 INCH HEIGHT 5/8 INCH O MODEL
$
11.67
Qty:
Part #:OL-60
- SCREW TYPE COPPER FREE ALUMINUM MATERIAL 9 1/2 INCH UL, CSA APPROVAL 2 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL STAINLESS STEEL WIDTH 3 1/8 INCH HEIGHT 5/8 INCH O MODEL
$
21.89
Qty:
Part #:ENY-2M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 3/4 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-9/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
29.33
Qty:
Part #:KILLUNY1
- MALE/FEMALE TYPE ZINC ELECTROPLATED STEEL MATERIAL 2-3/16 INCH UL 886, CSA C22.2 APPROVAL 1-1/2 INCH DIAMETER 1/2 INCH TRADE SIZE USED ON RIGID/IMC CONDUIT UNY MODEL
$
18.81
Qty:
Part #:KILLUNY2
- MALE/FEMALE TYPE ZINC ELECTROPLATED STEEL MATERIAL 2-3/8 INCH UL 886, CSA C22.2 APPROVAL 1-3/4 INCH DIAMETER 3/4 INCH TRADE SIZE USED ON RIGID/IMC CONDUIT UNY MODEL
$
36.96
Qty:
Part #:KLRKUNF2
- FEMALE/FEMALE TYPE ZINC ELECTROPLATED STEEL MATERIAL 1-15/16 INCH UL 886, CSA C22.2 APPROVAL 1-3/4 INCH DIAMETER 3/4 INCH TRADE SIZE .75 TRADE SIZE IN INCH HUBBELL[R] BRAND UNF MODEL
$
21.93
Qty:
Displaying: 1 - 24 of 72 Matching Items