Ul 217, Nfpa 72, (Chapter 11) the State of California Fire Marshall, Nfpa 101 (One and Two Family Dwellings), Federal Housing Authority (Fha), Housing and Urban Development (Hud)
Ul
View:
Part #:ASB0
- ANTI-SHORT TYPE NON-METALLIC MATERIAL (3) 14 AWG, (2) 14 AWG, (2) 12 AWG (ARMORED CABLE) CABLE SIZE UL APPROVAL 20 STANDARD PACKAGE #0, 5/16 INCH TRADE SIZE COLOR BRIGHT RED
$
2.55
Qty:
Part #:LN112
- DIE-CAST ZINC MATERIAL THREADED INSTALLATION UL APPROVAL 200 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE
$
0.77
Qty:
Part #:LN012
- DIE-CAST ZINC MATERIAL THREADED INSTALLATION UL APPROVAL 1000 STANDARD PACKAGE 1/2 INCH TRADE SIZE
$
0.29
Qty:
Part #:ARLFA102D
- VOLTAGE DIVIDER TYPE PLASTIC MATERIAL 3.531 INCH 3.775 INCH 0.109 INCH UL APPROVAL 25 STANDARD PACKAGE IN/OUT BOX[TM] BRAND FA MODEL
$
1.29
Qty:
Part #:ARLF101FD
- GANGABLE TYPE PLASTIC MATERIAL 4.5 INCH 5.99 INCH 3.51 INCH 1 GANG(S) UL, CSA APPROVAL WOOD/STEEL STUD MOUNTING 25 STANDARD PACKAGE 22 CUBIC INCH CAPACITY ONE-BOX[TM] BRAND
$
7.94
Qty:
Part #:ARLT205
- 5 FT 4.15 INCH 2 INCH UL, CSA APPROVAL CABLEWAY[T] BRAND STANDARD PACKAGE 10
$
23.04
FT
Qty:
Part #:ARLT23C
- COUPLING TYPE CABLE RUNWAY USED ON CABLEWAY[TM] BRAND APPROVAL UL, CSA MATERIAL NON-METALLIC SIZE 4.63 INCH W X 2 INCH D X 2.38 H
$
2.17
Qty:
Part #:ARLT23H
- 5.5 INCH W X 1.5 INCH D X 3.88 H SUPPORT BRACKET TYPE T205 CABLE RUNWAY USED ON CABLEWAY[T] BRAND APPROVAL UL, CSA
$
2.88
Qty:
Part #:T23A
- 90 DEGREE TYPE NON-METALLIC MATERIAL CABLE RUNWAY RACEWAY USED ON UL, CSA APPROVAL 10 STANDARD PACKAGE CABLEWAY[TM] BRAND
$
7.87
Qty:
Part #:ARLT23F
- FLAT SURFACE BRACKET TYPE NON-METALLIC MATERIAL CABLE RUNWAY RACEWAY USED ON UL, CSA APPROVAL 25 STANDARD PACKAGE
$
3.76
Qty:
Part #:ARLF101
- OLD WORK TYPE NON-METALLIC MATERIAL 2.28 INCH 3.72 INCH 3.51 INCH 1 GANG(S) UL, CSA APPROVAL SCREW MOUNTING 50 STANDARD PACKAGE 22.5 CU INCH CAPACITY NON-METALLIC CABLE CONNECTOR CABLE ENTRY STUD DEVICE MOUNTING HOLE ONE BOX[TM] BRAND INCLUDES GROUND CLIP MOUNTING TYPE VERTICAL
$
3.19
Qty:
Part #:ARLFB443
- DRY WALL MOUNTING APPROVAL UL, CSA FOR 1/2 INCH OR 5/8 INCH DRY WALL 17.96 CU INCH
$
9.48
Qty:
Part #:LN200
- DIE-CAST ZINC MATERIAL THREADED INSTALLATION UL APPROVAL 250 STANDARD PACKAGE 2 INCH TRADE SIZE
$
1.89
Qty:
Part #:LN114
- DIE-CAST ZINC MATERIAL THREADED INSTALLATION UL APPROVAL 500 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE
$
0.54
Qty:
Part #:LN100
- DIE-CAST ZINC MATERIAL THREADED INSTALLATION UL APPROVAL 1000 STANDARD PACKAGE 1 INCH TRADE SIZE
$
0.37
Qty:
Part #:LN034
- DIE-CAST ZINC MATERIAL THREADED INSTALLATION UL APPROVAL 1000 STANDARD PACKAGE 3/4 INCH TRADE SIZE
$
0.24
Qty:
Part #:NMLTST034
- STRAIGHT TYPE GRAY NYLON MATERIAL LIQUIDTIGHT FLEXIBLE NON-METALLIC TYPE-B CONDUIT USED ON UL 514B APPROVAL 100 STANDARD PACKAGE 3/4 INCH TRADE SIZE
$
1.88
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Part #:LEV13464
- PEDESTAL TYPE UL, CSA, NOM 057 APPROVAL 600 V VOLTAGE RATING #8-32 TPI SCREW MOUNTING HIGH OUTPUT LINEAR FLUORESCENT LAMP TYPE 660 W LAMP WATTAGE 18 AWG SOLID/TWISTED/TINNED, QUICK WIRE, PUSH IN WIRE TERMINAL TYPE R17D, RECESSED DOUBLE CONTACT, PLUNGER LAMP BASE WHITE BODY COLOR LEVITON[R] BRAND CONTACT MATERIAL SILVER PLATED COPPER ALLOY
$
6.10
Qty:
Part #:LEV13465
- PEDESTAL TYPE UL, CSA, NOM 057 APPROVAL 600 V VOLTAGE RATING SCREW MOUNTING HIGH OUTPUT LINEAR FLUORESCENT LAMP TYPE 660 W LAMP WATTAGE 18 AWG SOLID/TWISTED/TINNED, QUICK WIRE, PUSH IN WIRE TERMINAL TYPE R17D, RECESSED DOUBLE CONTACT, FIXED LAMP BASE WHITE BODY COLOR LEVITON[R] BRAND CONTACT MATERIAL SILVER PLATED COPPER ALLOY
$
4.71
Qty:
Part #:CUTTP432
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 3/4 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
8.09
Qty:
Displaying: 1 - 24 of 257 Matching Items