Ul217/ul2034
Ul (Canada and Us)
View:
Active Filters :
- Standard: Ul (Canada and Us) Ul217/ul2034
Part #:BLINBR-32-4W
- THREADED BRIDLE RING TO WOOD BEAM TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL UL (CANADA AND US) APPROVAL 1/4 INCH MOUNTING SIZE 100 PER BOX STANDARD PACKAGE 50 LB LOAD CAPACITY 2 INCH FITTING SIZE BR MODEL
$
1.59
Qty:
$
57.92
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:CUTTP431MSB
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL MSB BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (4) 1/2 INCH SIDE, (2) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (6) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
20.97
Qty:
Part #:BLINBA-4-16
- T BAR TO ELECTRICAL FIXTURE TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL T-BAR USED ON TWIST-ON INSTALLATION UL (CANADA AND US) APPROVAL 100 PER BOX STANDARD PACKAGE 50 LB LOAD CAPACITY 1/4 INCH-20 TPI X 5/8 INCH L STUD FASTENER TYPE 15/16 INCH T BAR SIZE FINISH BLACK BA MODEL
$
0.99
Qty:
Part #:BLINBG-8-12-U-2-4
- 360 DEGREE PIVOT TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL HAMMER-ON, PLIERS INSTALLATION UL (CANADA AND US) APPROVAL BOTTOM MOUNTING 100 PER BOX STANDARD PACKAGE 1/2 INCH, 3/4 INCH CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE COOPER B-LINE BRAND BG MODEL
$
1.31
Qty:
Part #:BLINBG-8-12-U-5-8
- 360 DEG PIVOT TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL HAMMER ON, PLIER INSTALLATION UL (CANADA AND US) APPROVAL BOTTOM MOUNTING 100 PER BOX STANDARD PACKAGE 1/2, 3/4 INCH CONDUIT SIZE 75 LB LOAD CAPACITY 5/16 TO 1/2 INCH BEAM/FLANGE SIZE GUIDE-RITE[TM] BRAND BG MODEL
$
1.46
Qty:
Part #:BLINBG-16-U-2-4
- 360 DEGREE PIVOT TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL HAMMER-ON, PLIERS INSTALLATION UL (CANADA AND US) APPROVAL BOTTOM MOUNTING 100 PER BOX STANDARD PACKAGE 1 INCH CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE COOPER B-LINE BRAND BG MODEL
$
1.43
Qty:
Part #:BLINBW-8
- ASTM A684/AISI 1055 HEAT TREATED HIGH CARBON COLD ROLLED STEEL MATERIAL UL (CANADA AND US) APPROVAL 100 PER BOX STANDARD PACKAGE 100 POUND (HORIZONTAL FLANGE), 25 POUND (VERTICAL FLANGE), 50 POUND (VERTICAL WIRE OR ROD) LOAD CAPACITY 1/2 INCH EMT/RIGID CONDUIT/CABLE SIZE COOPER B-LINE BRAND ROD SIZE 3/16 INCH, 1/4 INCH BW MODEL
$
0.50
Qty:
Part #:BLINBW-12
- ASTM A684/AISI 1055 HEAT TREATED HIGH CARBON COLD ROLLED STEEL MATERIAL UL (CANADA AND US) APPROVAL 100 PER BOX STANDARD PACKAGE 100 POUND (HORIZONTAL FLANGE), 25 POUND (VERTICAL FLANGE), 50 POUND (VERTICAL WIRE OR ROD) LOAD CAPACITY 1/2 OR 3/4 INCH (EMT/RIGID) CONDUIT/CABLE SIZE COOPER B-LINE BRAND ROD SIZE 3/16 INCH, 1/4 INCH BW MODEL
$
0.55
Qty:
Part #:BLINBA50
- T-BAR TO BOX ASSEMBLY TYPE PRE-GALVANIZED ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL SQUARE/OCTAGONAL BOX USED ON UL (CANADA AND US) APPROVAL 25 PER BOX STANDARD PACKAGE 70 POUND LOAD CAPACITY 24 INCH SPAN BOX HANGER FASTENER TYPE COOPER B-LINE BRAND BA MODEL
$
6.45
Qty:
Part #:BLINBRS-32A
- BRIDLE RING TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL UL (CANADA AND US) APPROVAL 50 PER BOX STANDARD PACKAGE 2 INCH RING FITTING SIZE THREAD SIZE 1/4 INCH-20 TPI X 7/8 INCH BRS MODEL
$
2.59
Qty:
Displaying: 1 - 12 of 12 Matching Items